Marketing Environment PDF

MARKETING ENVIRONMENT Introduction: A variety of environmental forces influence a company’s marketing system. Some of them are controllable while some others are uncontrollable. It is the responsibility of the marketing manager to change the company’s policies along with the changing environment....

MARKETING ENVIRONMENT Introduction: A variety of environmental forces influence a company’s marketing system. Some of them are controllable while some others are uncontrollable. It is the responsibility of the marketing manager to change the company’s policies along with the changing environment. According to Philip Kotler, “A company’s marketing environment consists of the internal factors & forces, which affect the company’s ability to develop & maintain successful transactions & relationships with the company’s target customers”. The Environmental Factors may be classified as: 1. Internal Factor 1. External Factor External Factors may be further classified into: External Micro Factors & External Macro Factors Company’s Internal Environmental Factors: A Company’s marketing system is influenced by its capabilities regarding production, financial & other factors. Hence, the marketing management/manager must take into consideration these departments before finalizing marketing decisions. The Research & Development Department, the Personnel Department, the Accounting Department also have an impact on the Marketing Department. It is the responsibility of a manager to company-ordinate all department by setting up unified objectives. External Micro Factors: 1. Suppliers: They are the people who provide necessary resources needed to produce goods & services. Policies of the suppliers have a significant influence over the marketing manager’s decisions because, it is laborers, etc. A company must build cordial & long-term relationship with suppliers. 2. Marketing Intermediaries: They are the people who assist the flow of products from the producers to the consumers; they include wholesalers, retailers, agents, etc. These people create place & time utility. A company must select an effective chain of middlemen, so as to make the goods reach the market in time. The middlemen give necessary information to the manufacturers about the market. If a company does not satisfy the middlemen, they neglect its products & may push the competitor’s product. 3. Consumers: The main aim of production is to meet the demands of the consumers. Hence, the consumers are the center point of all marketing activities. If they are not taken into consideration, before taking the decisions, the company is bound to fail in achieving its objectives. A company’s marketing strategy is influenced by its target consumer. Eg: If a manufacturer wants to sell to the wholesaler, he may directly sell to them, if he wants to sell to another manufacturer, he may sell through his agent or if he wants to sell to ultimate consumer he may sell through wholesalers or retailers. Hence each type of consumer has a unique feature, which influences a company’s marketing decision. 4. Competitors: A prudent marketing manager has to be in constant touch regarding the information relating to the competitor’s strategies. He has to identify his competitor’s strategies, build his plans to overtake them in the market to attract competitor’s consumers towards his products. Any company faces three types of competition: a. Brand Competition: It is a competition between various companies producing similar products. Eg: The competition between & Videcon companies. b. The Product Form Competition: It is a competition between companies manufacturing products, which are substitutes to each other Eg: Competition between coffee & Tea. c. The Desire Competition: It is the competition with all other companies to attract consumers towards the company. Eg: The competition between the manufacturers of TV sets & all other companies manufacturing various products like automobiles, washing machines, etc. Hence, to understand the competitive situation, a company must understand the nature of market & the nature of customers. Nature of the market may be as follows: Perfect Market Oligopoly Monopoly Monopolistic Market Duopoly 1. Public: A Company’s obligation is not only to meet the requirements of its customers, but also to satisfy the various groups. A public is defined as “any group that has an actual or potential ability to achieve its objectives”. The significance of the influence of the public on the company can be  understood by the fact that almost all companies maintain a public relation department. A positive interaction with the public increase its goodwill irrespective of the nature of the public. A company has to maintain cordial relation with all groups, public may or may not be interested in the company, but the company must be interested in the views of the public. Public may be various types. They are: a. Press: This is one of the most important group, which may make or break a company. It includes journalists, radio, television, etc. Press people are often referred to as unwelcome public. A marketing manager must always strive to get a positive coverage from the press people. b. Financial Public: These are the institutions, which supply money to the company. Eg: Banks, insurance companies, stock exchange, etc. A company cannot work without the assistance of these institutions. It has to give necessary information to these public whenever demanded to ensure that timely finance is supplied. c. Government: Politicians often interfere in the business for the welfare of the society & for other reasons. A prudent manager has to maintain good relation with all politicians irrespective of their party affiliations. If any law is to be passed, which is against the interest of the company, he may get their support to stop that law from being passed in the parliament or legislature. d. General Public: This includes organisations such as consumer councils, environmentalists, etc. as the present day concept of marketing deals with social welfare, a company must satisfy these groups to be successful. External Macro Environment: These are the factors/forces on which the company has no control. Hence, it has to frame its policies within the limits set by these forces: 1. Demography: It is defined as the statistical study of the human population & its distribution. This is one of the most influencing factors because it deals with the people who form the market. A company should study the population, its distribution, age composition, etc before deciding the marketing strategies. Each group of population behaves differently depending upon various factors such as age, status, etc. if these factors are considered, a company can produce only those products which suits the requirement of the consumers. In this regard, it is said that “to understand the market you must understand its demography”. 2. Economic Environment: A company can successfully sell its products only when people have enough money to spend. The economic environment affects a consumer’s purchasing behavior either by increasing his disposable income or by reducing it. Eg: During the time of inflation, the value of money comes down. Hence, it is difficult for them to purchase more products. Income of the  consumer must also be taken into account. Eg: In a market where both husband & wife work, their purchasing power will be more. Hence, companies may sell their products quite easily. 3. Physical Environment or Natural Forces: A company has to adopt its policies within the limits set by nature. A man can improve the nature but cannot find an alternative for it. Nature offers resources, but in a limited manner. A product manager utilizes it efficiently. Companies must find the best combination of production for the sake of efficient utilization of the available resources. Otherwise, they may face acute shortage of resources. Eg: Petroleum products, power, water, etc. 1. Technological Factors: From customer’s point of view, improvement in technology means improvement in the standard of living. In this regard, it is said that “Technologies shape a Person’s Life”. Every new invention builds a new market & a new group of customers. A new technology improves our lifestyle & at the same time creates many problems. Eg: Invention of various consumer comforts like washing machines, mixers, etc have resulted in improving our lifestyle but it has created severe problems like power shortage. Eg: Introduction to automobiles has improved transportation but it has resulted in the problems like air & noise pollution, increased accidents, etc. In simple words, following are the impacts of technological factors on the market: a. They create new wants b. They create new industries c. They may destroy old industries d. They may increase the cost of Research & Development. 5. Social & Cultural Factors: Most of us purchase because of the influence of social & cultural factors. The lifestyle, values, believes, etc are determined among other things by the society in which we live. Each society has its own culture. Culture is a combination of various factors which are transferred from older generations & which are acquired. Our behaviour is guided by our culture, family, educational institutions, languages, etc. The society is a combination of various groups with different cultures & subcultures. Each society has its own behavior. A marketing manager must study the society in which he operates. Consumer’s attitude is also affected by their society within a society, there will be various small groups, each having its own culture. Eg: In India, we have different cultural groups such as Assamese, Punjabis, Kashmiris, etc. The marketing manager should take note of these differences before finalizing the marketing strategies. Culture changes over a period of time. He must try to anticipate the changes new marketing opportunities. INDIAN MARKET & ITS ENVIRONMENT It is difficult to analyze the environmental factors affecting Indian market. Ours is a vast country with various religions, caste, sub-caste, languages, culture, etc. Each of these factors operates at different levels & art different places. 1. Vast Market: The Indian market is the second largest in the world considering its population. If consumption is considered, it has one of the lowest levels of consumption. Hence, it can be said that majority of the market for various products has been left untapped. Region-wise, the Indian Market can be broadly classified into Four Parts: a. Northern Market b. Southern Market c. Western Market d. Eastern Market 2. Rural Market: Majority of the Indians live in rural areas. Hence, rural markets have a significant influence on the company’s marketing strategy 3. Cultural & Religion: India is a country with many religions each religion has its own culture & most of the Indians are religious. The culture affects the habits of people. Hence, it has to be considered before deciding what is to be sold. Eg: Jainism completely prohibits the consumptions of meat. Hence, it is difficult to sell meat where Jains are living 1. Economic Conditions: India is one of the fastest developing countries. The standard of living is increasing every year. This indicates that the marketing opportunities in our country are vast. 2. Government: We are following the policy of mixed Economy i.e., Market is neither totally free (Capitalism) nor it is fully controlled (Socialism). The government encourages consumerism & hence he marketers are gradually accepting the marketing concept. 3. Intermediaries: Our country has two types of distribution system. They are: a. Public distribution system, where essential commodities are directly sold to the consumers through government agencies. b. Open distribution system, where the products are sold in the open market. The open distribution system in our country is the traditional one. The chain of distribution is once of the most efficient chains of the world. Wholesalers, retailers, brokers, etc are the intermediaries operating in our country. 4. Press: Press in our country is not as sophisticated as in the developed countries. Most of the newspapers & magazines are controlled by big business houses. 5. Technology: Most of the company/companies in our country import the technology from other countries. Investment in research is one of the lowest in the world. Rural Marketing Challenges & Opportunities: Majority of Indians live in villages & most of them are farmers. Rural markets in our country are changing rapidly. Many companies have not tried to find out the needs of rural consumers. Hence, many rural markets have been left untapped. Problems of Rural Marketing: About 80% of villages do not have proper infrastructural facilities like transportation, communication, etc. People in the rural market purchase in small quantities; usually, they behave as group. Hence, it is difficult to influence their behavior to deliver a product directly to the rural consumers; a company has to incur double the cost of what it incurs in case of urban consumers. Illiteracy among villagers makes it difficult to promote products. Most of them purchase because of their belief. MARKETING SEGMENTATION Introduction: Consumers behave in a group. Each such group has its own model of behaviour identifying such group of consumers is known as marketing segmentation. It is marketing strategy to produce & market producers that suits the need of a particular group of consumer. Definition: It is defined as “The strategy of dividing the market in order to consumer them”. According to Philip Kotler, “It is the subdividing of market into homogenous subsets of consumers where any subset may be selected as a market target to be reached with distinct Marketing Mix”. Importance of Market Segmentation: Market segmentation is built around the consumers. In other words, the company analyses the needs of the consumers, & the group of those consumers who have similar needs. It tries to satisfy those needs by having common marketing program, without such segmentation, market program becomes haphazard & they lead the company no where. A small company with limited resources can select a particular group of consumers & market its products efficiently by selecting the marketing mix suitable to that group. Basis of Segmentation: The following factors are considered before dividing the market: 1. Geographical Factors: On the basis of geographical factors, market may be classified as state-wise, region-wise & nation-wise. Many companies operate only in a particular area because people behave differently in different areas due to various reasons such as climate, culture, etc. 2. Demographic Factors: This is the most widely used basis for market segmentation. Market is classified on the basis of population, using ages, income, sex, etc as indicators. a. Age: It is known fact that people of different ages like different products, need different things, & behave differently. Almost all companies use this factor to reach the target market. On the basis of age, market in our country is divided into children’s market, teenager’s market, adult’s market, & the market for old people. Companies use the census data to prepare marketing strategies on the basis of age. b. Sex: There is a variation of consumption behavior between males & females. This factor is used as a basis for segmentation for products like watches, clothes, cosmetics, leather goods, magazines, motor vehicle, etc. c. Family Life Cycle: This is another important factor, which influences the consumer’s behavior. Eg: Before making purchases, a bachelor may consult his friends, a boy may ask his parents & a married man asks his wife. The study of family life cycle helps a company to prepare an effective promotional strategy. 3. Psychological factors: a. Personality: Most consumers are influenced by personality traits. This is particularly true in the case of urban consumers. On the basis of personality, consumers may be divided in to introverts (reserve people), talkative, status, conscious, suspicious & so on.  4. Economic Factors: On the basis of economic factors, markets have been classified in the westerns countries as follows: a. Upper Classb. Upper-upper classc. Lower-upper class d. Middle classe. Upper-middle classf. Lower-middle class g. Lower classh. Upper-lower classi. Lower-lower class In our country, it is classified as upper class (rich), middle class, & the lower class. Another classification based on income in our country is as follows: a. Very Richb. The Rich classc. The Aspiration Class & d. The Destitutes. 1. Behavior Factors: a. Occasions: Sellers can easily find out certain occasions when people buy a particular product. Eg: Demand for clothes, greeting cards, etc increases during the festival season. Demand for transportation, hotels etc increases during the holiday seasons. b. Benefits: Each consumers expects to fulfill certain desire or to derive some benefits from the product he purchases. Eg: A person may purchase clothes to save money & another to impress others. Based upon this, markets may be classified as markets for cheap price products & market for quality products etc. c. Attitude: On the basis of attitude of consumers, markets may be classified as enthusiastic market, indifferent market, positive market, & negative market. Benefits of Market Segmentation: The purpose of segmentation is to determine the differences among the purchases which may affect the choice of the market area & marketing strategies. Following are some of the benefits of marketing segmentation. a. It helps to formulate marketing programs. b. It helps to understand the complex behavior of consumers c. Tastes & Preferences of consumers may be easily determined. d. It helps in locating the new markets e. It helps marketing programs beneficial to consumers as products are produced & sold according to their needs. PRODUCT Introduction: In simple words, the term, “Product” means an article which satisfies our wants. It is defined as a set of attributes, tangible, intangible & physical assembled in an identified manner. Philip Kotler, defines the term product as “anything that can be offered to the market for consumption that might satisfy a need”. Features of a Product: 1. It has many utilities 2. It can either be tangible. Ex: soap, or intangible Ex: Insurance policy. 3. It is a combination, package, brand, etc 4. It is purchased because of its satisfying power. New Product Development: Introducing a new product is a difficult task, there is no guarantee that the new product developed is accepted in the market; hence, the risk if high. It is better to adopt a scientific approach for the development of new products. The following are the different stages of a new product development: 1. Idea Generation: New product development starts with an idea. The idea may come from any source. Ex: Competitors, Newspapers, Government, Research & Development, Department, etc. 2. Screening Analysis: Here the company evaluates all ideas. The intention here is to avoid unnecessary expenses by stopping further processing of unwanted ideas, which do not suit the company’s requirements. An idea is evaluated with reference to various factors such as consumer needs, investments, profitability, technology, etc. 3. Concept Testing: In the stage the concept of the new is tested. The co. evaluates whether the concepts would suit the co., requirements. 4. Business Analysis: Here a detail financial analysis is done. It is carried out to find out the financial marketing competitive & manufacturing viability usually, they analysis is done by the experts. The task of the management is this step is to identify the product features, estimate the market demand & the products profitability. Those ideas, which promise more profits with minimum payback are selected. 5. Product Development: In this stage, product on paper is converted into a physical product. This is done by the engineering department or by the research & development department. Proper care must be taken while developing the product, so that the new product does not become a waste. For this purpose, research reports, company’s budget, product features, etc have to be studied carefully. Undue haste in developing a new product results in the premature death. On the other hand, if the time taken is to long, the company may lose the opportunity to the competitors.  6. Test Making: After developing the product, the next stage is to test its commercial viability. This process is known as test making. Test marketing is defined as “developing a temporary Marketing Mix & introducing the new product to a market called, the sample market to verify & analyze the market reaction for the new product”. This is one of the most important steps because for the first time, the information on the new product acceptance by the market is collected. While, test marketing, the company changes the Marketing Mix namely, Product, Price, Promotion & Physical Distribution depending upon the test marketing results. If it is accepted, it chooses the best marketing mix for the product, otherwise the project is rejected. Advantages of Test Marketing: a. It helps to understand the market reaction to the new product. b. Customers perception on the marketing mix is understood. c. It avoids costly error of manufacturing, unwanted products. It reduces, the uncertainties relating to the new product. d. It helps in developing suitable marketing mix e. It helps in developing proper marketing strategies. f. Test marketing also highlights the weakness of the new product, which can be rectified before launching on a large scale. g. Test marketing gives better coordination between the company, intermediaries & the customers. h. It also helps to understand the intermediaries view on the new product. i. It brings down the overall cost of new product development by eliminating wastages. It should be remembered that the market chosen for test marketing must be proper in the sense that is should represent the entire country so that biased results are not considered. 1. Commercialization: When once is successful in test marketing, i.e., when the market accepts the new product, it is launched in other markets on a large scale in a wider market is known as commercialization. It is from this stage that a new product is really born from the customer’s point of view. PRODUCT CYCLE Product also has various stages of life as human beings. From the time a product is introduced, till it is withdrawn from the market, it goes through 5 stages. Analysis of these stages for the purpose of repositioning the product in the market is called Product Life Cycle management. The following are the stages in a product life cycle. Introduction Stage The Growth Stage The Maturity Stage The Saturation Stage The Decline Stage The above stages can be shown in the following graph:  Life Cycle Stages 1. Introduction Stages: In this stage, a new product is introduced on a large scale for the first time. Market reacts slowly to the introduction. In other words, consumers take time to accept the new product. Initially, the company may suffer losses, sales improves gradually. Most of the products fail in this stage itself. Following are the characteristics of this stage: a. Consumers do not have the knowledge of the product b. Consumers may or may not be strongly in need of the new product. c. If there is a need for the product, the company gets readymade demand. Otherwise, it increases slowly. d. Sales are minimum e. The competition is less, in fact the company, which introduces new product is called as a Market Pioneer. f. The cost of it is very high because the company spends money heavily on Research & Development, Sales, Promotion, etc. 1. Marketing Strategies during the Introduction Stage: A company has to prepare the policies very carefully in the stages because it has a great impact on the image of a new product. Even a minor mistake results in the premature death of a product. The following are the strategies that the company may adopt in this stage: a. It may spend heavily on promotion & fix high price. This meets two objectives. Firstly, heavy promotion creates large demand & high price, brings immediate profits. This strategy also helps to create brand preference in the minds of the consumer. It is normally followed when there is a great need for the product, when the product belongs to the richer class & when products are consumer specialties. a. This second strategy is to fix high price but to spend less on promotion. This is preferred when the product has limited market, in which people have knowledge about the product & the competition is completely absent. b. Another strategy is to charge low price & spend heavily on promotion. This is preferable when consumers are sensitive to the price & market is wide enough. This strategy brings good returns in the long run. c. The company may charge low price & spends less on promotion. This is preferable when the consumers are informed about the product, market is very large & there is no competition for the time being. In the introduction stage, the competitors are very cautious. They do not enter the market immediately. They study the strategies of a company & watch the reaction of the consumers. This helps them to find out the defects of the company’s strategy. 1. Growth Stage: It is called the market acceptance stage. Following are its features: a. Consumers & traders accept the product b. Sales & profit increase c. More competitions enter the market d. The focus of competition is on the brand rather than the product e. Competitors may introduce new features to the product f. Distribution network increase g. The price will be reduced marginally. Marketing Strategies in the Growth Stage: a. The company tries to impress upon the consumers that its brand is superior b. It may introduce new models or improve the quality c. It may enter new market & sell its products with new distribution channels d. To attract more buyers, it may reduce the price. 1. Maturity Stage: This stage indicates the capacity to face the competition, sales increases at a decreasing rate. Competition becomes severe. It is reflected in various ways such as offering discounts, modifying products etc. Marketing Strategies during Maturity Period/Stage: In this stage, the manufactures have to take responsibility to promote his product. This strategy aims at creating brand loyalty. 1. Saturation Stage: This is the stage when the sales reach the peak point. Competition intensifies further & profit begins to decline. Small competitors may withdraw from the market because of their incapability to face the competition. Marketing Strategies: This is the stage where the marketing manager must try to reposition his product. Most of the strategies in this stage are offensive in nature. Each manufacture tries to cut down his competitor’s market share by aggressive promotion policy. The objective of marketing in this stage is to retain the present sales level. 1. Decline Stage: For all products, sales invariably declines as new products enter the market. In this stage, there is a sharp decline in the profits, cost increases & market share comes down. Most of the  manufactures withdraw from the market. Some may reduce production & concentrate only on a limited market Marketing Strategies: This stage offers one of the greatest challenge to the marketing manager. He has to decide whether or not to continue with the product. The main task of marketing manager is to revitalize the demand instead of discontinuing the product immediately. It is better to withdraw gradually. Those channels of distribution, which are costly & unproductive maybe removed. In the meantime, the weak points of the marketing mix maybe identified & altered as required. Reasons for the Failure of New Product: 1. Poor marketing research 2. Not using the up-to-date technology 3. High price or to costly products 4. Poor design 5. Inefficient marketing 6. Non-cooperation from the middlemen 7. Improper promotional techniques 8. Improper timing of introduction of the new product. PRODUCT PLANNING & PRICING STRATEGIES Introduction: Product planning is that part of marketing, which is concerned with determining the products to be offered, deleted & diversification. Objectives of Product Planning: Product planning is one of the most important functions of a marketing manager. The following are its objectives: 1. To offer products based upon customer needs. 2. To diversify, to capitalize on the company’s strength. 3. To utilize the available resources more profitability. 4. To decide on the elimination of non-profitable products. 5. To change the features of the product as per the changes in the market. 6. For long-term survival. Components of Product Planning: 1. Product Innovation 2. Product Diversification 3. Product Development 4. Product Standardization 5. Product Elimination 6. Product Mix & Product Line 1. Product Innovation: Innovation is a part of continuous improvement. In the absence of innovation, products become stale & hence die in the market. Innovation is required to keep up with the phase of changing market needs. According to Drucker, “Innovation will change customer’s wants, create new ones, extinguish old ones & create new ways of satisfying wants.” 2. Product Diversification: When a manufacturer offers more products in different areas, it is referred as product diversification. In fact, when a manufacturer diversification. Diversification normally involves business in a new area. Eg: entering into hotel business, sony entering into film production business. 3. Product Development: It involves introducing a new product either by replacing the existing one or innovating a completely new product. It can either be brand extension or line extension. Company must be careful while developing new products because research shows that 92% of them fall in the market. Another danger of product development is cannibalization. 4. Product Standardization: It implies a limitation of types of products in a given class. It gives uniformity in terms of quality, economy, convenience & Value. Eg: Each model of T.V. gives a  different standard. Standardization promises a minimum level of performance & hence is used as a benchmark for quality. 5. Product Elimination: This involves an emotional decision of withdrawing the existing product line. Decision must be carefully taken based upon current market share, future prospects etc. The product elimination involves reviewing the present product portfolio, analyze their profitability & then decide on discontinuance of a product. 6. Product Mix & Product Line: Product line is defined as a group of products offered by a company which belongs to same family of products or similar to each other or substitutes. Eg: Product line of ponds for personal care products includes cold creams, talcum powders, etc. Product Mix is defined as combination of product lines offered by a company. Eg: Product mix of Bajaj includes two wheelers, home appliances, electrical appliances, financial products etc. Product Portfolio Planning: A product mix & line of a company put together forms product portfolio of a company. It can be explained in terms of product width, product depth * the product consistency. Product width explains the number of product lines that a company offers, whereas product indicates the number of products in each line & product consistency indicates the closeness of items of range of products. PRICING Price of a product is “its” value expressed in terms of money which the consumers are expected to pay. Form the seller’s point of view, it is return on the exchange & in economic terms, it is the value of satisfaction. Importance of Price: Price is a key factor, which affects a company’s operation. It plays an important role at all levels of activities of a company. It influences the wages to be paid, the rent, interest & profits. It helps in proper allocation of resources by controlling the price, the demand & supply factor may easily be adjusted. Objectives of Pricing: 1. To increase the profit: this is the most common objective. A company may fix the price with the aim of earning certain percentage of profits 2. Market Share Objective: some companies fix the price with a view to capture new market or to, increase or maintain the existing market share. The objective here is to either avoid competition or to meet it.  3. To Stabilize the Price: This is usually followed in the oligopoly market by the market leaders. The objective here is to avoid the price war & fluctuations in price. 4. To Recover Cost: To get back the cost incurred as early as possible, is another objective of pricing. It is for this reason that different prices are set for cash & credit sales for the same product. 5. Penetration Objective: The objective of penetration pricing is to fix a low-price so as to enter the new market. 6. To Maintain the Product Image: In this case, the objective is to fix a higher price to create a perception that the product is of superior quality. This is called market skimming strategy. Factors Influencing the Price Determination: The decision to fix the price is influenced by many factors which are controllable & uncontrollable. They are: 1. Product Characteristics. 2. Demand Characteristics. 3. Manufacturer’s Objectives. 4. Cost of the Product. 5. Economic Condition. 6. Government Regulation. Product Characteristics: a. Product Life Cycle: A product manufacturer charges the price depending upon the stages of the life cycle of the product. Eg: If he has introduced a new product, he may charge a lower price & increase it when it enters the growth stage. b. Perishability: According to the general principle, other things being equal, if a product is perishable, the price will be lower because it has to be sold as early as possible. c. Product Substitution: If there is a substitute in the market, then the price will be either equal to or lower than the price of the substitute, because if the price is more that the substitute, people may purchase the substitute product only. Demand Characteristics: It is one of the most important factors influencing the price. The company must forecast demand for its products & its elasticity before fixing the price. Demand estimation helps a company to prepare sales & the expected price, the consumers are willing to pay. The expected price of the market is the influencing factor here. According to the general principle, the final price fixed must neither be lower nor higher than the expected price. Manufacturer’s Objective: If the manufacturer wants to increase the market share, he has to fix the competitive price. In other words, he has to offer more discounts etc. On the other hand, if his objective is to increase profits, he may fix a higher price.  Cost of the Product: Most of the companies fix the price on the basis of cost. Accordingly, selling price is equal to total cost plus profit. Total cost includes manufacturer’s cost, administrative cost & selling cost. Economics Condition: According to the general economic theory, price will not be lower during the depression & higher during the inflationary period. The company has no control over this factor because it is the result of general condition prevailing in the entire country. Government Policy / Regulation: If government thinks necessary, it may fix minimum price for a product. If it wants to discourage consumptions, it may increase the price & reduce it to encourage consumption. Pricing Policies & Pricing Methods or Determination or the Price: Cost Plus Pricing: In this method, the cost of manufacturing a product serves as the basis to fix the price, the desired profit is added to the cost & the final price is fixed. Most of the companies follow this method. Following are various methods of cost + pricing. a. Price Based on the Total Cost: Here a percentage of profit is added to the cost to calculate the selling price. It is usually followed by the whole sellers & the retailers. For industries such as construction, printing, repair shops, etc. this method is more suitable. b. Price Based on the Marginal Cost: It is the method of pricing where the price is fixed to recover the marginal cost only. Marginal cost is the extra cost incurred to produce extra units. Hence, this method is suitable only when pricing decisions are to be taken to expand the market to accept the export orders etc. c. Break Even Pricing: Under this method, the price is fixed first to recover the total cost incurred to produces the product. It is fixed in such a manner that the company neither earns profit nor does it suffer losses. This method is suitable during depression when there is acute competition, when a new product is to be introduced or when the product enters the declining stage of its life. Advantages of Cost + Pricing: 1. This method is simple & hence price can be easily determined. 2. Companies, which cannot estimate the demand may follow this method. 3. It is suitable for long-term pricing policies Dis-advantages of Cost + Pricing: 1. It neglects the demand factor of the product  2. It is difficult to determine the exact cost. Pricing Based Upon Competition: Competition based pricing is defined as a method where a company tries to maintain its price on par with its competitors. It is suitable when the competition is serve & the product in the market is homogenous. This price is also called the going rate price. The company cannot take risk of either increasing the price or decreasing it. Following are some of the methods based upon competition: a. Pricing Above the Competition: It is usually followed by well-recognized manufacturers to take advantage of their goodwill. The margin of profits is too high. This method is useful to attract upper class & upper middle class consumers. b. Pricing Below Competition Level: This type of pricing is followed by the wholesalers & the retailers. They offer various kinds of discounts to attract consumers. Even established companies follow this method to maintain or to increase their sales during the off season. Pricing Based on Markets: Depending upon the market of product, the manufacturers may fix the price for their products. In a perfect market, he has to go for the expected price in the market. It is also called the market price or going rate price. In case of monopoly, he is free to fix the price & can effectively practice the price discrimination policy. In oligopoly where there are few sellers, the price is fixed by the largest seller called the market leader & others follow him. If price is above this level, he loses sales considerably & if he reduces it, sales may not increase because competitors immediately react & reduce their price also. PRODUCT PROMOTION OR PROMOTIONAL STRATEGIES It is the duty of the manufacturers to know about & accept their products & price for this purpose, they have to communicate with, persuade, & motivate them. To achieve this, they use promotional strategies. Promotion is the means through which a company meets its prospective customers. Meaning of Promotion: Promotion is a part of an organization marketing mix that is used to inform & persuade the market regarding its products & services. Promotion Mix: It is a combination of personal selling, advertising, sales promotion, publicity & public relations that helps an organization to meet its marketing objectives. Communication Process in Marketing: Companies to be successful must communicate effectively. Effective communication is one which is received by the receiver in its original meaning as sent by the sender. In marketing, effective communication must be capable of making the consumers understand what the company is going to say. Following are the steps in communication process: 1. Identifying the Target Market: It is concerned in finding out to whom the message is being prepared. For each group of consumers or distributors a different message is required. Identifying the target, market helps a company to ascertain tastes, preferences etc of the consumers. 2. Determine the communication Objective: After analyzing target market & their characteristics, the next step is to find out what is desired from the communication, to attract the target market. 3. Designing the Message: While designing the message, the marketing manager must understand what to communicate & to whom to communicate. The message must be prepared in such a way that it reaches the target market effectively. 4. Selecting Communication Channels: A company can use two types of channels of communications, namely personal & non-personal. Non-personal channels are also called indirect Personal channel refers to communicating channel & they include newspapers, TV, publicity, directly with the target market through salesmen etc. 1. Allocating of Promotional Budget: Here the amount is to be spent to promote the product is fixed. Decision is also taken on the amount to be spent on various media. 2. Deciding on the Promotion Mix: Here money is allocated to various tools of promotion. Before deciding, the marketing managers have to analyze the nature & impact on the market of each kind of production. Factors Affecting the Selection of Promotion Mix: 1. Type of the market: Promotion of industrial products requires a different strategy from the promotion of consumer products. Eg: Personal selling is the major tool of promotion for industrial products, whereas advertising is a major tool for consumer product. 2. Product Life Cycle: A product requires different kinds of promotion in different stages of its life. In the introduction stage, advertising & publicity are used. In the growth state, all means of promotion are given due importance. In the maturity stage, personal selling is used mostly & in the decline stage, it is the sales promotion which is the most influencing factor. 3. Push & Pull Strategy: Push strategy refers to the manufacturer using the sales force to push the sales. He promotes the product aggressively to the wholesalers. Wholesalers promote to retailers & retailers aggressively promote to the consumers. This is can be illustrated as follow: Push Strategy Promotes To ManufacturersWholesalersRetailers Consumers In case of pull strategy, manufacturer using heavy advertisement, publicity etc. promotes directly to the consumers. Consumers ask the retailers for the products. Feeling the demand, retailers force the wholesalers to sell/supply the product & wholesalers come to the manufacturer finally. It can be illustrated as below: Promotes to ManufacturersWholesalersRetailers Consumers The main advantages of pull strategy is that the manufacturers need not depend upon the wholesalers & retailers to sell his product & also this method helps him to create brand loyalty.  1. Buyer’s Attitude: Eg: If buyers are positive in action, promotion aims at reminding them about the availability of the product. Tools of Promotion Advertising: The word “Advertise” has been derived from the word “Ad” which means “Turn” & “Verto” meaning “towards”. Hence the term advertising means to turn the attention towards something. Definition: According to the Philip Kotler, “Advertising consists of non-personal or one way form of communication conducted through paid media under clear sponsorship.” Objectives of Advertising: The main objective of advertising may be explained in the “AIDAS” formula, where A=Attract the attention, I=Create interest (read), D=Desire (like), A=Action (act), S=Satisfaction. In other words, a god advertisement must attract the consumers, create interest in them, make them to desire the product & finally they should buy the product. The other objectives are: a. To bring to the notice of consumers, the product, the features, uses etc. b. To make an immediate sale. c. To build demand in case of a new product. d. To build the brand recognition e. To increase market share f. To build overall image of the company g. To reach new market. Factors Affecting the Media Selection: 1. The objective of Advertising: Eg: If immediate action is required radio, tv, newspapers, etc, may be used. 2. The Geographical Factors: The geographical factors such as circulation of the media, required coverage, etc. 3. Nature of the message: Eg: If the advertisement is just to inform people about something, only signboards can be used. 4. Cost of the Media: Eg: Newspapers are the cheapest medium, whereas TV is costliest. 5. The financial resources available. 6. The nature of the product 7. The nature of the consumers  8. Power of the media to reach the target market. Kinds of Advertising Media or Media or Advertising: 1. Press Publicity or the Print Media: a. Newspapers: Newspapers are useful to advertise all types of product. They are more flexible & cheaper. In case of products, which are to be sold quickly or within a limited period, this is the most useful media. Before selecting a particular newspaper, the advertiser must take into account its circulation, readers, cost, etc. Advantages: i. It reaches almost all places, hence the exposure is maximum. ii. As newspapers are published daily, continuous publicity is possible. iii. They are more flexible, economical, & convenient. iv. Advertising may be changed according to the requirements. Disadvantages: i. The life of advertisement is very short ii. It becomes a waste if the readers do not go through the advertisement. iii. It becomes a waste if there is no market for the product advertising in the place of circulation. a. Magazines: Magazines are read leisurely & they are more attractive. Magazines may be either general meant for general readers. Eg: India Today or specific that is specially meant for a particular group, Eg: Business India, Women’s Era etc. Advantages i. The quality of advertisement is better because of the better design, print, color, & quality of the paper. ii. The advertisement reaches the target market. iii. Almost all advertisements are read because their number will be limited, they are more attractive & readers have enough time to go through them. Disadvantages: i. It is not flexible ii. It is comparatively costlier iii. As it is published periodically, urgent messages cannot be advertised. Direct Mail Advantages: This method is more popular in case of mail order business. The advertiser maintains a list of prospective customers & the advertisement is dispatched to them directly by post. Advertisement may be in the form of circulars, leaflets, broachers, catalogues, etc. Advantages: 1. The advertiser can reach any part of the country & convey his message directly to the customer 2. It tries to build personal contact as the message is addressed to the customer himself. 3. The message can be altered according to the requirements. 4. It reaches the target market. Disadvantages: 1. It is very difficult to prepare the list of prospective customers 2. In case of products, which need personal attention inspection before & after sales services, it cannot be used. Outdoor Advertising: This is the oldest form of advertising; it is suitable to promote products that need a wide appeal. Messages are exhibited at busy streets & places. They are primarily meant for the moving population. Outdoor advertising helps the advertiser to remind the people of his product frequently. Posters, Paintings, Electronic Signboards, Sky Writing, etc. are the various forms of outdoor advertising. Advantages: 1. It attracts the attention of the people 2. It is flexible & comparatively cheaper 3. It has mass appeal 4. It is useful to promote the brand name. Disadvantages: 1. The message is limited 2. It is difficult to find out the impact of advertisement 3. It is not primary form of advertising 4. At the best, it supplements other methods. The Broadcast Media: a. Radio: In our country, radio as a means of advertising was first used in 1927, at present it is one of most effective tools of advertising. In almost all countries, sponsored commercial programs are  very popular: Advantages: i. Its coverage is wide ii. It reaches even the illiterate consumers. iii. It is more flexible, in the sense that the advertiser can broadcast the messages at the language he wants it. iv. The changes of being heard are more because advertisements are broadcasted in between various popular programs. v. Advertisements are effective because they are recreational in nature. vi. For emergency announcement, this is the most suitable media. Disadvantages: i. As it reaches general consumers, advertisement expenditure may become unproductive. ii. Its life is extremely short iii. It is more expensive. a. Television: Being one of the important instruction in the field of marketing it has occupied position. Most manufacturers prefer this medium because it has both audio & visual effect. It is suitable for consumer shopping & specialty goods & all types of industrial goods. Advantages: 1. It is the only medium, which appeals to both eye & ears. 2. Creativity may be achieved 3. It is more life than any other medium. 4. It is more flexible, i.e., advertisement can be telecasted when programs relate to a particular group are telecasted. Eg: Manufactures of toys may telecast their advertisement when children’s programs are being telecasted. Disadvantages: 1. Because of too many advertisements, consumers may lose interest in them. 2. The life is extremely short 3. It is the costliest form of advertisement. a. Cinema: It is one of the most popular media in our country. It attracts a wide audience. The main advantage is that almost all advertisements are looked at & read by the people. Cinema  advertisement may be in the form of slides, animation, documentaries, etc. The main disadvantage is that its life is very short, in other words, when once the cinema begins people may forget all advertisements. a. Online Advertising or Interest Advertising: One of the features of E-marketing is online advertising. Its popularity is increasing of late as it reaches the target market directly; scrolls, banners, etc are some of the forms of online advertising. a. Advertising on Mobiles: The advent of mobile phones has changed the nature of advertising drastically. People advertise directly to mobile phone users through messages (SMS). This method of marketing is referred to as vital marketing. Exhibition, fairs, demonstration, window display etc are other forms of advertisements. Criticisms of Advertising:  1. It is considered as an unproductive expenditure. 2. It forces the people to purchase those products, which are not within reach. 3. It increase the cost of the product 4. It makes people to become slaves of a particular brand. 5. Most advertisements mislead the people 6. Most advertisements are unethical & immortal 7. It is used as a tool to deceive people 8. They make false claims & omit certain things intentionally. The above points prove that advertisement is a mere waste. But a deeper analysis proves otherwise, it facilitates production & consumption functions. As its results are intangible, it cannot be considered as a wasteful expenditure. It stimulates competition & helps the people to get the better products at reasonable price. SALES PROMOTION Introduction: Sales promotion is one of the most loosely used terms in marketing. According to some authors, sales promotion is a broader term which includes all activities such as advertising, personal selling, publicity etc to capture the market. Another school of thought feels that it is a combination of various activities intended to stimulate & to supplement personal selling & advertising. Definition: According to American Marketing Association, Sales Promotion is “A group of activities other than advertising, personal selling, & publicity that stimulates consumer purchasing & dealer’s effectiveness. Eg: Discounts, Samples, Exhibition, etc. Importance & Objectives of Sales Promotion: Following are the reasons for the increased importance of sales promotion: 1. Shorter life cycle of a product 2. Heavy competition 3. Now producers have to capture the market as quickly as possible. 4. To push the product during the off season or dull period. Objectives of Sales Promotion: 1. To improve the marketing performances of the middlemen (Push Strategy) 2. To increase demand at the consumer level (Push Strategy) 3. To supplement advertising & salesmanship 4. To make consumers to buy a new product or to encourage them to use more quantity of the existing product. 5. To attract new customers 6. To become the market leader 7. To encourage the use of other products of the same manufacturer 8. To create & maintain interest at the level of middleman. Methods of Sales Promotion: 1. Sales Promotion Aims At Consumers: In this case promotion activities are carried on to include consumers to buy the product i.e, being promoted. Following are some of the methods of promoting products at consumer level: a. Discount Coupons: Usually this method is followed by the manufacturers of consumer shopping goods such as textiles, household articles, etc. Consumers will be allowed to avail discounts on their purchase when they surrender their coupons to the seller.  b. Free Samples: Manufacturers may distribute samples of their product free of cost. This method is most effective to promote consumers necessities & convenient goods. Eg: Newspapers, Medicines, etc. c. Consumers Contest: A contest may be conducted to attract consumers from various parts. Some manufacturers restrict the contest only to those who purchase their product. d. Points to Purchase Display (): Under this method products that are being offered to be sold are demonstrated near the important selling centers. Eg: Vehicles, TV, etc. e. Trade Shows & Exhibition: These are conducted to attract the attention of consumers to remind them of the product available in the market. Other methods include distribution of its gifts & complements, lucky draws for consumers, etc. 1. Sales Promotion Directed at Middlemen: These are the programs intended to increase the interests of the middlemen to push the sales. Some of the promotional methods are: a. Advertisement Allowance: In this case, manufacturers compensate retailers for displaying their products. b. Premium cards given to increase sales during the off season. Eg: purchase 5 soaps & get 1 free. c. Wholesalers & agents distribute free samples to retailers in order to test the market reactions. d. Some manufacturers agree to receive back the goods if they are not sold within a specified period. e. Trace associations may conduct trade fairs, exhibitions, etc, for the distributors. This helps them to understand the later development in the field of marketing & to have good contact with others in the same field. a. Many manufacturers hold a get-together function for their dealers. This is popularly know as dealer’s convention. This helps in the development of informal organisation among the dealers. b. Some manufacturers the follow the policy of dealers contest. The dealer who achieves maximum sales is given prizes. c. Some company offers higher allowances to the dealer when they achieve higher sales target. Personal Selling or Salesmanship: It is defined “Art of winning the buyer’s confidence for seller’s house & goods, thereby winning a regular & permanent customer.” Importance of Personal Selling: The successful salesman creates a group of satisfied customers. He is considered to be the mirror of the company. Importance of salesmanship can be summarized by the following functions performed by a salesman. 1. To introduce new products to the market  2. To maintain the present customers group & to discover new customers. 3. To help the customers in deciding what to buy & what not to buy 4. To give firsthand information about the market to the manufacturer. 5. To act as a link between the producers & consumers. Qualities of a Good Salesman: It is very difficult to identify to identify all characteristics that make a good salesman. Taking into account who were successful in their job, psychologist have underlined the following basic qualities of a good salesman: 1. Physical Requirements: A good salesman must have a pleasing personality, He must be able to influence others. 2. Hunger for Money & Status: A contented salesman is always a liability to the co0mpany. Hunger for money & status forces a salesman to sell more so that he earns more. 3. Self-confidence: A successful salesman believes himself & has a high self-esteem. Self-confidence helps him to meet people to different types & different situations 4. Tendency to Compete with others: Competition not only improves morale, but also motivates a salesperson to sell more. The other Qualities are: 1. He must be courageous, dependable, honest, courteous, cheerful & patient. 2. He should posses a pleasing personality. 3. He should have complete information about the product that he sells. 4. He should know the details of his company & its competitors. 5. He should have knowledge about the today’s market, product he is selling. Suitability: Personal selling is more suitable in the following cases: 1. When the market is limited 2. When efficient middlemen are not available 3. When a new product has to be introduced 4. When a product requires demonstration. Eg: Vacuum cleaner. 5. When a product requires personal attention before & after sales services. 6. When purchases are infrequent but valuable. Eg: Industrial goods. Sales Management: In simple words sales management refers to the overall management of sales. It is defined as planning, directing & controlling of selling activities of the company. It includes recruiting, selecting, training, equipping, assigning, supervising, paying & motivating the sales forces of the company. Responsibility of Sales Management: 1. Analysis the market thoroughly. 2. To study the consumer’s psychology 3. Careful analysis of the competitor’s behaviour 4. To make sure that the right product is offered & sold 5. To find out whether the company can expand the market or introduce a new product. 6. To establish sales target. 7. To frame sales policies 8. To co-ordinate selling activities. 9. To plan the advertising campaign to develop sales promotion strategies. 10. To study market fluctuations 11. To conduct efficient market reservation. Channels of Distribution (Physical Distribution) Introduction: One of the important problems of marketing is the distribution of goods & services to the right place, person & the right time. Manufacturers often find it difficult to decide about the effective distribution system. The channel of distributions refers to the group of intermediaries, which perform the distribution functions. Definition: According to Philip Kotler, “The distribution is the set of all firms & individuals that assist in the transferring the little of goods & services as they move from producers to customers.” It is also defined as “The root through which goods move from the place of production of the place of consumption.” Functions of the Channels: 1. Channels of distribution helps, the goods & services to move from the place of production to the place of consumption, hence they create place utility. 2. Goods are brought by the channels when they are needed. Hence they create time utility. 3. A channel reduces complexity in the distribution system 4. Inclusion of channel reduces the financial burden of the producers 5. They provide various services such as standardization, grading, etc. 6. They supply the market information to the producers 7. They help producers in promoting their sales. Types of Channels 1. Zero-level channel (producer to consumer): It is also called as direct marketing or direct selling. This channel consists of the producer who directly sells his products to the ultimate consumers. This is the shortest, simplest, & cheapest form of distribution. Producers are benefited by increased profit, whereas consumers are benefited by reduced price. This is possible because it eliminates the middleman completely. With the development of sophisticated & efficient retailing like supermarkets, chain-stores, automatic selling machine are financially sound follow this channel of distribution. For products like jewelry & industrial goods like machinery, this is the best channel. 2. One-Level Channel (ProducersRetailersConsumers or producersWholesalersConsumers): This is a short channel where the manufacturer may himself perform some of the wholesaler. This is considered to be the best channel as it eliminates some of the marketing intermediaries & at the same time gets advantages of inclusion of retailers. In case of perishable goods, this is the best channel. When there  is large scale promotion, inelastic demand & when manufactures are financially sound this channel is preferred. 3. Two-Level Channel (Manufactures WholesalersRetailersConsumers): This is the traditional channel. It is more useful in the case of buyers, sellers, & manufactures who operate in small scale. The manufacturer sells his products in large quantities to a wholesaler who in turn sells in small quantities to retailers & finally retailers sell to ultimate consumers. Products which have low unit value & which are purchased frequently may be distributed through this channel. 4. Three Level Channel (ManufacturesWholesalersAgentsRetailersConsumers): In this method manufactures appoint agent such as consignees to sell their products. It is preferable for exporters or MNCs. Factors Affecting the Selection of Channel Selection of a particular channel depends on various factors. They are: 1. Market Factors: a. Nature of the market: When manufacturer produce consumer goods, the channel will be lengthy because the market will be large & spread throughout the country. Moreover, demand may be inelastic. In case of industrial goods, he can sell directly because buyers are concentrated in few places. b. Number of Companies: In case if buyers are limited in number, the manufacturer can directly sell to them. If consumers are scattered the manufacturers should go for larger channel. 2. Product Factor: a. Unit Value of the Product: Lower the value of the product longer will be the channel. Eg: Matchboxes, salt, etc. b. Perishability: In case of perishable products, the shortest channel should be used because they should be sold as quickly as possible. Eg: Fruits, Vegetables, Milk, etc. c. Nature of Product: If the product is highly technical in nature, the manufacturer sells it to the buyers. Eg: Computers, because such products require before & after sales services, which wholesalers, & retailers cannot provide. In case of consumer goods, which are technical in nature he may appoint sales agent. Eg: Motor Vehicle, TV, etc. 3. Company Factors: a. Finance: If the company is financially sound, it can sell its products directly to its consumers by maintaining its own warehouse, retail shops, etc. b. Management Capability: If the management is capable of handling the distribution function efficiently, it can prefer a shorter channel. Methods of Distribution: 1. Intensive Distribution: It is a method of selling whereby a manufacturer distributes his products through a large number of retailers & in, as many places as possible. In this case, retailers control the distribution system. Usually, consumer’s necessities are sold through this system. 2. Selective Distribution: In this case, manufacturer sells their products through few retailers. Even though this method is suitable to sell all products, it is usually followed in case of industrial goods &  consumer shopping & luxury goods. Ex: Motor vehicle. 3. Exclusive Method of Distribution: In this case, the manufacturer sells his products only through a particular wholesaler or retailer. In other words, the manufacturer gives him the exclusive rights to distribute the products such a distributor is usually prohibited in dealing to the competitor’s product. Types of Channel Members: A channel includes many middlemen. The term middlemen mean those individuals or institutions, which assists a producer in the transfer of ownership of goods to consumers. Following are some of the various kinds of middlemen: 1. Agents: These are the middlemen assist the buyers & the sellers in buying & selling of the goods without taking the ownership. 2. Brokers: These are the agents whose main function is to bring into contact between buyers & sellers. Their powers are limited as they cannot fix price, terms of sale, etc. 3. Wholesalers: The wholesaler is a middleman who buys from the producer directly & sells it to the retailers on a small scale for the purpose of resale. Discount House: It is a kind of retail business dealing with consumer durables competing on the basis of price appeal with low margin & minimum consumer services. Elimination of Middlemen or are middlemen necessary in the channels: The channels of distribution are the means through which goods are passed on to consumers. In the process thy look on various marketing functions like financing, transportation, grading, standardization, risk-bearing, etc. to perform these functions they have to incur losses. Hence, the services of middlemen will have to be paid either by the manufacturer or the consumer. Many manufacturers are trying to eliminate middlemen and have opted for direct selling because of improvement in retail techniques like automatic selling machines, telemarketing etc. It should be noted that even though Manufacturers can eliminate middlemen, they can’t eliminate their functions. In other words functions performed by them must be taken over by the producers if the goods are to be maid available in the market. Manufacturers try to eliminate middlemen to perform the functions of middlemen at the lowest possible cost and to serve the consumer best. Arguments in Favor of Middlemen: 1. If there were no Middlemen, it would have been difficult for the producers and consumers to meet personally to buy and sell. Hence inclusion of middlemen reduces the complexities of the distribution function. 2. Many producers do not have the resources to sell their products directly to the consumers. 3. They perform some of the important marketing functions like standardization, grading, transportation, warehousing, etc this makes producers concentrate on their production activities. 4. It is the Middlemen who help in stabilizing the prices 5. It brings down the cost of production of some of the functions of the producers as they are taken over by the middlemen. 6. As they purchase on large scale they also bring down the storage cost  7. They provide important marketing information to the producers. 8. They create place and time utilities. Arguments in Against of Middlemen: 1. They are considered as parasites who for one reason or another prevent the direct contact between producers and consumers. This mistakes producers ignorant of consumer’s grievances which result in customer dissatisfaction which may bring down the sale. 2. Middlemen also manipulate the economy. This misleads both the consumers and producers. 3. Middlemen are also referred to as cost escalators. In other words, they unnecessarily increase the price of the product. 4. They often dictate the terms of marketing. In fact, the term ‘Black Market’ was the creation of middle men. 5. They are also referred to as fair weather Friends. In other words, they only sell those products which gives them maximum profits. They go on changing their Loyalties depending on the profitability. 6. In practice they do not perform any marketing function. They simply transfer ownership without shouldering any responsibility. To conclude, it can be said that many manufacturers regard middlemen as Evils. But, all of them can’t eliminate middlemen. Hence they are considered as necessary Evil.