Gun School Note Card CTD PDF

+-----------------------------------------------------------------------+ | What is the term used for the on screen labels directly above the | | screen navigation hardkeys? | +=======================================================================+ | Sc...

+-----------------------------------------------------------------------+ | What is the term used for the on screen labels directly above the | | screen navigation hardkeys? | +=======================================================================+ | Screen navigation soft keys | +-----------------------------------------------------------------------+ | What do the numbers beneath the MAL indicator represent? | +-----------------------------------------------------------------------+ | Displays the number of subsystems that contain at least one | | malfunction | +-----------------------------------------------------------------------+ | the malfunction advisory list screen may be selected how? | +-----------------------------------------------------------------------+ | Using the status bar MAL indicator | | | | Cursor control buttons | +-----------------------------------------------------------------------+ | What are the dimensions of the display screen | +-----------------------------------------------------------------------+ | 8.5 inches wide | | | | 6.5 inches high | +-----------------------------------------------------------------------+ | In silent watch what soft key is greyed out? | +-----------------------------------------------------------------------+ | Maintenance | +-----------------------------------------------------------------------+ | What views can be selected on the SLD | +-----------------------------------------------------------------------+ | Driver video, gunner video, commander video, commander tactical | | display | +-----------------------------------------------------------------------+ | the navigational soft keys may be activated how? | +-----------------------------------------------------------------------+ | 1. Placing the cursor over the softkey and pressing in on the | | commanders hand station cursor control button | | | | 2. Highlighting the softkey using the CDET arrow keys and pressing | | the enter key on the CDET | | | | 3. pressing the associated hardkey | | | | 4. using the enter and cursor direction keys on the face of the CTD | +-----------------------------------------------------------------------+ | What is the upper most portion of the display screen called? | +-----------------------------------------------------------------------+ | Status bar | +-----------------------------------------------------------------------+ | What are the components of the CTD | +-----------------------------------------------------------------------+ | Screen navigation soft keys | | | | Screen navigation hard keys | | | | Enter and cursor direction keys | | | | Video controls | | | | Main hard keys | | | | Light security controls | | | | Screen image controls | | | | Cursor control button | | | | Commanders data entry tool | +-----------------------------------------------------------------------+ | Which ways can you access power management? | +-----------------------------------------------------------------------+ | Setup -\> power management | | | | Maintenance -\> power management | +-----------------------------------------------------------------------+ | What key on the CTD emphasizes brighter regions of an image? | +-----------------------------------------------------------------------+ | CON - | +-----------------------------------------------------------------------+ | the CTD provides five functional areas not available on any of the | | previously fielded BFVs what are they? | +-----------------------------------------------------------------------+ | Navigation | | | | Power management | | | | Fire control | | | | System diagnostics | | | | Switching between A3 and C2 | +-----------------------------------------------------------------------+ | What does C-GPS indicate | +-----------------------------------------------------------------------+ | Encrypted GPS | +-----------------------------------------------------------------------+ | How many main hard keys does the CDT have and what are they? | +-----------------------------------------------------------------------+ | MAIN, MSG, SCL, SCRL, Zoom, Home | +-----------------------------------------------------------------------+ | What are the components of the CTD? | +-----------------------------------------------------------------------+ | Screen navigation soft keys | | | | Screen navigation hard keys | | | | Enter and cursor direction keys | | | | Video controls | | | | Main hard keys | | | | Light security controls | | | | Screen image controls | | | | Cursor control button | | | | Commanders data entry tool | +-----------------------------------------------------------------------+ | What is the only main hard key that is active on the CTD | +-----------------------------------------------------------------------+ | MAIN | +-----------------------------------------------------------------------+ | What is viewed on the SLD when the CTD button is selected | +-----------------------------------------------------------------------+ | Whatever screen is currently being displayed on the CTD | +-----------------------------------------------------------------------+ | What buttons/switches control the lighting of the CTD and SLD | +-----------------------------------------------------------------------+ | D/N Switch | | | | SEC Switch | +-----------------------------------------------------------------------+ | Where is the cursor control button located | +-----------------------------------------------------------------------+ | Commanders hand station | +-----------------------------------------------------------------------+ | Name the two ways the commander can move the cursor on the CTD | +-----------------------------------------------------------------------+ | Cursor control button | | | | Enter and cursor direction keys | +-----------------------------------------------------------------------+ | What is the function of the D/N switch | +-----------------------------------------------------------------------+ | Toggles the display between 100% and 50% illumination | +-----------------------------------------------------------------------+ | What are the ways the commander can activate the soft keys | +-----------------------------------------------------------------------+ | 1. Placing the cursor over the softkey and pressing in on the | | commanders hand station cursor control button | | | | 2. Highlighting the softkey using the CDET arrow keys and pressing | | the enter key on the CDET | | | | 3. pressing the associated hardkey | | | | 4. using the enter and cursor direction keys on the face of the CTD | +-----------------------------------------------------------------------+ | Vehicle position may be displayed using what? | +-----------------------------------------------------------------------+ | UTM | | | | MGRS | +-----------------------------------------------------------------------+ | Located in the status bar is applique status indicator field. What | | are the two statuses you may receive in this box? | +-----------------------------------------------------------------------+ | Applique on | | | | Applique off | +-----------------------------------------------------------------------+ | How is the DTG displayed? | +-----------------------------------------------------------------------+ | ddhhmm%MMMyy | +-----------------------------------------------------------------------+ | What does the acronym MAL stand for? | +-----------------------------------------------------------------------+ | Malfunction advisory list | +-----------------------------------------------------------------------+ | How is the DTG maintained by the system? | +-----------------------------------------------------------------------+ | Automatically maintained from data received from the GPS satellite, | | when a satellite lock is obtained | +-----------------------------------------------------------------------+ | the CTD screen architecture is divided into what areas? | +-----------------------------------------------------------------------+ | Setup | | | | FBCB2 | | | | Maintenance | | | | Silent watch | | | | Toggle | +-----------------------------------------------------------------------+ | How many Main hard keys does the CTD have and what are they | +-----------------------------------------------------------------------+ | Main | | | | SCL | | | | SCRL | | | | ZOOM | | | | MSG | | | | Home | +-----------------------------------------------------------------------+ | What button will emphasize brighter regions of an image | +-----------------------------------------------------------------------+ | CON - | +-----------------------------------------------------------------------+ | the CTD consists of what components | +-----------------------------------------------------------------------+ | Screen navigation soft keys | | | | Screen navigation hard keys | | | | Enter and cursor direction keys | | | | Video controls | | | | Main hard keys | | | | Light security controls | | | | Screen image controls | | | | Cursor control button | | | | Commanders data entry tool | +-----------------------------------------------------------------------+ | What is the CTD screen structure composed of? | +-----------------------------------------------------------------------+ | Status bar | | | | Message display area | | | | Screen navigational soft keys | +-----------------------------------------------------------------------+ | What is the only main hard key that is active on the CTD | +-----------------------------------------------------------------------+ | Main | +-----------------------------------------------------------------------+ | What are the dimensions of the CTD screen isplay | +-----------------------------------------------------------------------+ | 8.5 inches wide | | | | 6.5 inches high | +-----------------------------------------------------------------------+ | What CTD button will toggle between 50% and 100% illumination | +-----------------------------------------------------------------------+ | D/N switch | +-----------------------------------------------------------------------+ | What are the four ways the operator can access screen navigation soft | | keys? | +-----------------------------------------------------------------------+ | 1. Placing the cursor over the softkey and pressing in on the | | commanders hand station cursor control button | | | | 2. Highlighting the softkey using the CDET arrow keys and pressing | | the enter key on the CDET | | | | 3. pressing the associated hardkey | | | | 4. using the enter and cursor direction keys on the face of the CTD | +-----------------------------------------------------------------------+ | What function does the SEC button on the CTD provide? | +-----------------------------------------------------------------------+ | SEC switch turns off the display lamp to ensure the display signature | | is minimized during ramp down situations at night | +-----------------------------------------------------------------------+ | Name the two ways the commander can move the cursor on the CTD? | +-----------------------------------------------------------------------+ | Cursor control button | | | | Enter and cursor direction keys | +-----------------------------------------------------------------------+ | What is the SHIFT key on the CDET used for? | +-----------------------------------------------------------------------+ | Highlight consecutive list items | +-----------------------------------------------------------------------+ | What is the CONTROL key on the CDET used for? | +-----------------------------------------------------------------------+ | Highlight non consecutive list items | +-----------------------------------------------------------------------+ | What is the only soft key available upon receiving a pop up message | +-----------------------------------------------------------------------+ | Close | +-----------------------------------------------------------------------+ | What are the colors found in the INU status indicator field? What do | | they represent? | +-----------------------------------------------------------------------+ | Green -- INU is operational with good position | | | | Yellow -- INU not yet calibrated | | | | Red -- INU has faults and is not working properly | +-----------------------------------------------------------------------+ | CTD screen architecture is divided into what areas? | +-----------------------------------------------------------------------+ | Setup | | | | FBCB2 | | | | Maintenance | | | | Silent watch | | | | Toggle | +-----------------------------------------------------------------------+ | What does the acronym MAL stand for? | +-----------------------------------------------------------------------+ | Malfunction advisory List | +-----------------------------------------------------------------------+ | What does the POL key do? | +-----------------------------------------------------------------------+ | Invert the image from white (black) hot to black (white) hot | +-----------------------------------------------------------------------+ | What are the elements of the status bar | +-----------------------------------------------------------------------+ | Screen navigation soft keys | | | | Screen navigation hard keys | | | | Enter and cursor direction keys | | | | Video controls | | | | Main hard keys | | | | Light security controls | | | | Screen image controls | | | | Cursor control button | | | | Commanders data entry tool | +-----------------------------------------------------------------------+ | In regards to fire control, what can the Commander do now? | +-----------------------------------------------------------------------+ | May now display, enter, save, and employ environmental parameters, | | boresight, sight alignment, and zeroing procedures | +-----------------------------------------------------------------------+