Drug Labelling Administrative-Order-No.-2016-0008.pdf

Republic of the Philippines Department of Health OFFICE OF THE SECRETARY...

Republic of the Philippines Department of Health OFFICE OF THE SECRETARY I|AR 2 | 2016 ADMINISTRATTVE ORDER No.2ofs7 7pt6- 0008 U SUBJECT: Revised Rules and Regulations Governing the Generic L"b.ltrs R"q L RATIONALE Article III, Section 7 of the 1987 Philippine Constitution declares that the State recognizes the right of the people to gain information on matters of public concern, such as those relating to health and health products. Labels and lal'reling materials are the primary sources of information for consumers. They provide useful information such as those dealing with the safe and effective use of a drug product (e.g. indication(s), pharmacologic class and dosage), and information dealing with quality (e.g. manufacturing and expiration dates, regisffation number, and manufacturer). " The Food and Drug Administration (FDA), as the regulatory authority of the Philippines responsible for all matters pertaining to drug products, has issued several guidelines to ensure that drug establishments provide the most accurate information relating to their products. In the course of the enforcement of these issuances, coupled with the advent of globalization and development of harmonization schemes of technical procedures and requirements applicable to the drug industry in the ASEAN region, gaps in regulations have been identified, and the need for a more transparent and clear regulatory guideline pertaining to labels has been raised. Hence, this Administrative Order is issued to rationaiize the regulations on labeling of drug products for human use, as well as to address the gaps and issues raised for the effective implementation of the declared policy. tr OBJECTI\18 The objective of this Administrative Order is to rationalize the existing rules and regulations on generic labeling requirements of drug products, consistent with the harmonized requirements of the ASEAN Member States; thus providing an updated and comprehensive guideline. Buildingl,SanLazaroCorrpound,RizalAvenue,Sta.Cruz, 1003Manila. TrunkLine65l-7840DirectLine:711-9501 Fax:.743-7829;743-1786. URL: htF://www.doh.gov.oh; e-mail: oser;,,Odoh.gov.oh Page I of \M wr1 /V' 16 l ilL SCOPE This Administrative Order shall apply to all manufacturers and distributors (i.e. exporters, importers and wholesalers) of drug products for human use, including herbal medicines and traditionally-used herbal products. IV. DEFINITION OF TERMS For purposes of this Administrative Order, the following terms shall mean: 1. Active Moiety - the molecule or ion, excluding those appended portions of the molecule that cause the drug to be an ester, salt (including a salt with hydrogen or coordination bonds), or other noncovalent derivative (such as complex, chelate, or clathrate) of the molecule, responsible for the physiological or pharmacological action of the drug substance. 2. Active Pharmaceutical Ingredient (API) - a substance or compound that is intended to be used in the manufacture of a pharmaceutical product as a therapeutically active compound (ingredient). 3. Adverse Drug Reaction (ADR) - a response to a medicine that is noxious and unintended, and which occurs at doses normally used in man. 4. Batch - a defined quantrty of starting material, packaging material or product manufactured in a single or series of processes so that it can be expected to be homogeneous. (In the case of continuous manufacture, the batch must correspond to a defined fraction of production, characterized by its intended homogenerf; it may sometimes be necessary to divide a batch into a number of sub-batches, which are later brought together to form a final homogeneous batch). 5. Batch Number - a distinctive combination of numbers and/or letters which specifically identifies a batch on the labels, the batch records, and the certificates of analysis, etc. 5. Biological Product - any product of biological origin, prepared with biological processes, derived from human blood and plasma, or manufactured by biotechnology, consisting of substances of higher molecular weight whose purity, potency, and composition cannot readily and reliably be determined by chemical or physicochemical analysis. Examples of this group include vaccines, blood products, modified animal tissues, high molecular weight hormones, allergens, and the products of genetic engineering or other newer biotechnological techniques. This definition does not include antibiotics and substances that, although of biological origin, are of lowmolecular weight and can be isolated as pure substances, such as purified steroids and alkaloids 7. Brand Name - the proprietary name assigned to the product by the Marketing Authorization Holder (MAH) 8. Contraindication - a statement regarding the conditions wherein the use of the drug product may cause harm to the patient. \ {k' \y',,, Page 2 of I 'l+, 9. Date of Manufacture - refers to the date (month and year) during which processing of the bulk product, from which the goods are to be filled, is completed. 10. Dosage - the quantity of a medicine gtven per administration. 11.Dosage Form - the drug product type (e.g.tablet, capsule, solution, cream) that contains a drug substance generally, but not necessarily, in association with excipient(s). 12. Dosage Strength - may refer to: (a) the concentration of the known API or active moiety in a given formulation stated in metric units (b) the potency of the known API or active moiety expressed in terms of, for example, units by reference to a standard (potency is the specific ability or capacity of the product as indicated by the appropriate laboratory tests or by adequately controlled clinical data obtained through the administration of the product in the manner intended to effect a given result(s)). This shall be stated in accordance with the potency requirements of the monograph of the product, as officially listed in USP, BP and EP, or any other official compendia recognized by FDA. 13. Drug Product or Drug (a) any article recognized in the official United States Pharmacopoeia- National Formulary (USP-NF), official Homeopathic Pharmacopoeia of the United States (FIPUS), Philippine Pharmacopoeia (PP), Philippine National Drug Formulary pNDF), British Pharmacopoeia (BP), European Pharmacopoeia (EP), Japanese Pharmacopoeia (JP), International Pharmacopoeia (Ph. Int), any national compendium or any supplementto any of them; (b) any article intended for use in the diagnosis, cure, mitigation, treatment or prevention of disease in humans or animals; (c) any article other than food intended to affect the structure or any function of the human body or animals; (d) any article intended for use as a component of any article specified in clauses (a), (b) and (c) not including devices or their components, parts or accessories; (e) herbal and/or traditional drugs which are articles of plant or animal origin used in folk medicine which are: i. recognized in the Philippine National Drug Formulary ii. intended for use in the treatment, cure or mitigation of disease symptoms, injury or body defects in humans iii. other than food, intended to affect the structure or any function of the human body iv. in finished or ready-to-use dosage form; and v. intended for use as a component of any of the articles specified in clauses i, ii, iii and iv. 14. Excipient - an ingredient, added intentionally to the drug substance which should not have pharmacological properties in the quantity used. 15. Expiration Date - the date (i.e. month and year) placed on the label of a drug product designating the time prior to which a batch of the product is expected to remain within the approved shelfJife specification if stored under defined conditions. After the expiration date, there is 11 \, MM Page 3 of 16 th.  guarantee that the product will remain within the approved specifications and, therefore, it may be unsuitable for use and should not be used. 16. Formulation - the name, strength, and reference monograph of all APIs and/or excipients present in the drug product. 17. Generic Class Name - the identification of a drug product containing three or more APIs by its scientifically and internationally recognized name or by its official generic name as determined by FDA. 18. Generic Name - the identification of a drug product by its scientifically and internationally recognized API or by its official generic name as determined by FDA. 19. Indication - the FDA-approved clinical use of a drug product based on substantial, scientifically supported evidence ofits safety and efficacy in the given dosage form. 20. Investigational Product - a pharmaceutical form of an active ingredient or placebo being tested or used as a reference in a clinical trial, including a product with a marketing autharization when used or assembled (formulated or packaged) in a way different from the approved form, or when used for an unapproved indication, or when used to gain further information about an approved use. 2l.Label - the written, printed or graphic matter on any drug product, its immediate container, tag, literature or other suitable material aflixed thereto for the purpose of giving information as to the identity, components, ingredients, attributes, directions for use, specifications and such other information as may be required by law or regulation. Z2.Labeling Materials - label on the immediate container, and the other printed materials that are made available with the drug product at the time of purchase andlor when the product is used, such as the outer wrapper cartons, package inserVleaflet accompanying the product, which provide the accurate and necessary detailed information for the identification and proper use ofthe product. 23.Lot Number - any distinctive combination of letters and/or numbers assigned to a partictrlar lot, herein defined as a portion of a batch. 24.Manufacturer - an establishment engaged in any and all operations involved in the production of health products as well as the final release of the finished product, with the end view of its storage, sale or distribution; provided, that the term shall not apply to the compounding and filling of prescriptions in drugstores and hospital pharmacies. 25. Marketing Authorization (MA) - an official document issued by the competent drug regulatory authority (DRA) for the purpose of marketing or free distribution of a product after evaluation for safety, efficacy, and quality, and containing, inter alis: the name of the product; the pharmaceutical dosage form; the quantitative formula (including excipients) per unit dose; the shelf-life and storage condition(s); and packaging characteristics, specific information on which authorization is based (e.g. "The product(s) must conform with all the details provided in the application and as modified in subsequent correspondence."), the product information approved for health professionals and the public, the sales category, the name and  address of the holder of the authorization, and the period of validity of the authorization. In the Philippines, the MA is in the form of a Certificate of Product Registration (CPR). 26. Marketing AuthorizationHolder (MAH) - the company or corporate or legal entity in the field of pharmaceuticals in whose name the MA for a drug product has been granted. This party is responsible for all aspects of the product, including qualrty and compliance with the conditions of the MA. The authorized holder must be subjected to legislation in the country that issued the MA, which normally means being physically located in that country. In the Philippines, the MAH may either be a manufacturer or distributor (exporter, importer or wholesaler). 27. Mode of Administration - the manner and site where the drug product is to be introduced into or applied on the body. 28. Net Content - the total amount/quantity/number of the dosage form in a certain container of a drug product expressed in metric system. 29. New Chemical Entif NCE) - new chemical or biological API not previously authorized for marketing for any pharmaceutical use in the country in question. 30. Over-the-Counter (OTC) Drugs - drug products that can be dispensed even without the written order of a licensed physician or dentist. 31. Pack Size - refers to the quantity of dosage form in the final packaging (excluding the shipping carton) of a drug product bearing the required labeling information. - 32.Package Insert (PD the document defining information that is supplied with prescription drug products by the MAH. The PI is intended for use by healthcare professionals. 33. Patient Information Leaflet (PL) - the document defining information that is supplied with non-prescription drug products by the MAH. The PIL is intended for use by patients and is written in layman's language. - 34. Pharmacologic Category refers to the classification of the drug product based on its therapeutic action as specified in the product registration. 35. Precautions - the instruction and the special care required in the use of the drug product to avoid undesired effects and to ensure its safe and effective use. 36. Prescription Drug Products - drug products that are to be dispensed only upon the written order or prescription of a duly licensed ph,vsician or dentist for the management or treatment of a condition or a diagnosed disease of man. 37.Pimary Label - refers to the label on the primary packaging material of a drug product. 38, Prodrug - a drug substance that is in inactive the intended pharmacological actions and must be converted into the pharmacologically active agent by metabolic or physico-chemical transformation. 39. Product Name - the name (i.e. generic ruLme and brand name, if any) of the drug product as registered in FDA. 40. Product Description - retbrs to the complete organoleptic description of the finished drug product. Page 5 \r ofl6 A Itlp  41. Registration Number - a combination of letters and/ar numbers assigned to a particular drug product by FDA as proof of regisfration. 42. Small containers - are drug packaging materials that hold less than or equal to 5 mL volume or 5 g weight, which include: (a) ampoules, vials, and nebules of small volume parenterals; (b) packaging materials for ophthalmic, otic, and nasal liquid preparatons; (c) jars and tubes for semi-solid preparations; and (d) any other packaging material of the same capacity. 43. Storage Condition(s) - the acceptable specified temperature range, humidity, and other snvironmental factors within which optimal stability of the drug product is ensured based on laboratory data. 44. Summary of Product Characteristics (SPC) - the product information as approved by the DRA. It also serves as the source of information for health persorurel as well as for consumer information on labels and leaflets of drug products, and for control of advertising. A Company Core Data Sheet (CCDS) approved by the DRA may also be considered. 45. Warnings - statements regarding the occurrence of potential hazards and undesirable effects associated with the use of the drug product and the limitation of its use. v. GENERAL GUIDELINES L The following are the minimum mandatory information that shall appear in the labeling materials accompanying a drug product: (a) Product Name (b) Dosage Form and Strength (c) Pharmacologic Category (d) FormulatiorlComposition (e) Indication(s) (f; Dosage and Mode of Administration (g) Contraindication(s), Precaution(s), Warning(s) (if applicable) (h) Interactions (i) Adverse Drug Reaction(s) (f) Overdose and Treatment (k) Storage Condition(s) 0) Net Content or Pack Size (mlName and Address of MAH (n) Name and Address ofManufacturer (o) For prescription drug products, Rx Symbol and Caution Statement (p) ADR Reporting Statement (q) Registration Number (r) Batch Number and Lot Number (if any) (s) Expiration Date and Date of Manufacture All information required to appear on the label shall be (a) written in English and/or Filipino and (b) readable with normal vision without straining. The color contrast, position and spacing of the printed matter \"^ Page 6ofl6 /U^-"- /Y /  on the label must be taken into consideration in complying with labeling requirements. 3" For all NCEs, biological products, and prescription generic products and herbal medicines, a PI shall be submitted; for all household remedies, over-the-counter drug and herbal medicines, and traditionally-used herbal products, a PIL shall be submitted. The SPC shall be the basis of the submitted PI for NCEs and biological products. 4. In lieu of PI or PIL, the foregoing information shall be printed directly on the reverse side or inner panel of the outer packaging material or inner carton; provided, that the product is intended to be sold or dispensed together with such packaging material or inner carton. 5. For products intended to be sold without any product information sheet and unit carton, the minimum mandatory information shall be required to be reflected on the primary label. 6. The revised labeling materials compliant with this Administrative Order shall be submitted upon renewal of the MA of a registered drug product. The labeling materials of products due for renewal registration within the first year of implementation of this Administrative Order shall be granted reasonable exhaustion period. The specific information required for each labeling material is indicated under Annex A. VI. SPECIFIC GUTDELINES A. Requirementsfor each Mandatory Information 1) ProductName (a) The product name shall indicate the generic name and the brand name (if any) of the drug product. (b) The generic name shall be as the active moiety based on the International Non-proprietary Name (INN), and consistent with the dosage strength indicated; for prodrugs, the generic name shall be the INN of the prodrug itself and not its active chemical (metabolite) form. (c) The generic name shall appear prominenily with an outline box, with the generic name's prominence over the other information being clearly and distinctly readable by normal vision as may be determined by common visual sense. (d) For herbal medicines and traditionally-used herbal products, the generic name shall be the botanical origin or as recognized by FDA. (e) If a product is identified by a brand name together with its generic name, the generic name enclosed in an outline box shall in all cases appear immediately above the brand rutme; for narrative texts (whether in the unit carton, primary label or insert), the brand name shall in all cases be preceded by the generic ruLme and enclosed in parentheses or brackets. \"4 / Page 7 of 16 /$" / [*  (f) For products with multiple APIs, the product name shall indicate all of the APIs, enumerated in the order of decreasing pharmacologic activity and placed inside the box in either of the given format: Ex.: Iron Folic Acid Brand Name Iron / Folic Acid Brand Name Iron + Folic Acid Brand Name If the APIs have more or less similar pharmacologic activity, they shall be enumerated in the order of decreasing potency and strength; provided, that if there exists a single approved name for fixed-dose combination (e.S. Cotrimoxazole for the standard formulation Sulfamethoxazole / Trimethoprim), the single approved name shall be used; provided further, that if there is no single approved name but there exist a generic class name (e.g. Multivitamins for multi-vitamin containing preparations, as approved by FDA), the generic class name shall be used. The individual components of the single approved name and generic class name shall be enumerated under Formulation. 2) Dosage Form and Strength (a) The label shall speci$ the (i) dosage form ofthe product such as tablet, capsule, suspension, ointment, etc., (ii) the specific delivery system, if any, such as modified release, and (iii) specific mode of administration, if any, and appropriate, such as vaginalhectal suppository, etc., as approved by FDA. If there is no qualifier for tablets, it is understood as an oral, uncoated, immediate release tablet. (b) The label shall specify the dosage strength of the product which shall be expressed in metric units reduced to lowest terms and in the number of the largest unit specified (e.g. 500 mcg, not 0.5 mg). (c) FDA, as deemed necessary and appropriate, shall allow the strength of certain dosage forms (e.g. semisolid, ophthalmic, otic, nasal, and topical preparations) to be expressed as percentage. (d) For products with multiple APIs, the dosage strength shall be stated in accordance with the generic name indicated: for multiple APIs, the individual strengths shall be indicated, separated by a slash sign O; it a single approved name is used, the dosage strength shall be indicated as the sum. Ex.: racillin /Tazabactam Brand Name 4 g / 5{X} mg Powder for Injection (IV) pTL-- Page8 *" /rn tr t 'r Pineracillin * Tazobactam Brand Name 4 g / 500 mg Powder for Injection (IV) Piperacillin Tazobactam Brand Name Brand Name 960 mg Tablet 3) Pharmacologic Category The pharmacologic category shall be as determined by FDA, taking into consideration current acceptable standards for therapeutic categories. 4) Formulation/Compo sition (a) The label shall state the name and strength of all APIs present per unit dose of the product, which shall be arranged in decreasing pharmacologic activity, or if having more or less similar pharmacologic activity, in decreasing potency and strength. (b) The generic name of the API shall be stated in fulI (including salts and esters, if any) and correlated to the active moiety, when applicable. The name of the API shall be in accordance with its INN; for herbal medicines and traditionally-used herbal products, the official Philippine Pharmacopoeia name shall be used, or as determinedby FDA. (c) The reference monograph recognized by FDA (e.g. USP, BP, EP, JP, PP, Ph. Int) used fior the analysis of the finished drug product shall be indicated immediately after the API, unless a non-official method is used; for multiple APIs, it shall be indicated after the first APL Ex.: Each tablet contains: Sodium Ascorbate, USP..................562.5 mg (equivalent to Ascorbic Acid 500 mg) (Vitamin A) Each tablet contains: Calcium Carbonate, 8P.......................750mg (equivalent to elemental Calcium 300 mg) Each capsule contains: Amoxicillin (as Trihydrate), USP.......................... 500mg Each vial contains: Omeprazole (as Sodium)................40mg M/- '"*'' l\  Each tablet contains: USP.......... Sulfamethoxazole,.............800mg Trimethoprim.....................160mg (d) Alcohol, when present in the product shall also be indicated, expressed as a percentage (%). The name "alcohol" without qualification shall mean ethyl alcohol. (e) The coloring, antirnicrobial, and antioxidant agents, and preservatives used in the manufacture of the product that may cause hypersensitivity and/or other adverse drug reactions shall also be indicated, with the amount expressed in the same manner as the API. 5) Indication(s) The indication(s) stated in the labeling materials shall include only the FDA-approved clinical use(s) of the drug product. 6) Dosage and Mode of Administration (a) The label shall contain full information on the product's recommended dosage, including the (i) initial or loading dose, (ii) optimal use or usual dose, (iii) frequency interval, (iv) duration of treatment, (v) dosage adjustrnent, and other pertinent aspects of drug therapy, if applicable. (b) Relevant information regarding dilution (e.g. the specific volume of diluent to be added), reconstitution, preparation, and administration shall also be included (such as "Shake well before use" for suspensions, "Do not crush" for tablets with special delivery system, etc.) in all labeling materials. The label shall include a description ofthe reconstituted preparation. (c) Separate directions for use by special populations, adults, and children shall be stated. If the product is not recommended for children, the dosage shall be clearly identified as "Adult dose", or any statement to that effect. 7) Contraindication(s), Precaution(s), Warning(s) (a) The label shall contain full information regarding the contraindication(s) of the drug product, as well as the precaution(s) to be observed in its administration and use. (b) The label shall include warning statements, as required and/or specified by FDA (e.g. "Flammable," "For external use only," "Keep out of reach of children"). Other specific additional instructions shall be issued by FDA in appropriate regulations. (c) Where the contents of a container are to be used on one occasion only, the label shall include the statement, "Single use only", "Single dose", "Use only once", "Discard any remaining portion", or any statement to that effect. 8) Interactions The label shall include drug-drug, drug-food, drug-laboratory testing interactions, as well as other relevant interactions, if applicable. /Uh/ n"*)of'u /\- 9) Adverse Drug Reaction(s) The label shall include detailed information on adverse drug reaction(s) for a drug product arranged by system organ class. 10) Overdose and Treatment The label shall include signs and symptoms of overdose, as well as possible treatment. 1 1) Storage Condition(s) (a) The label shall indicate appropriate storage condition(s) and special instructions for handling of the drug product. (b) Special labeling instructions shall be added for drug products with Cannot tolerate excessive heat. "Store and transport not above 30 0c" "Store in drv conditions" l2)Pack Size orNet Content (a) The unit carton shall indicate the pack size of the drug product expressed in terms of the number of units in the pack or the volume of each unit, e.g. 60 mL (for liquids), 10 blister packs x 10 tablets (for tablets), 100 tablets, 12 sachets x 5 g, etc.; Provided, that in case of drug products for reconstitution for oral administration, the pack size shall reflect the volume of the product as reconstituted. (b) For the primary label excluding blisters and foil strips, the net content of the product, stating the total amount/quantity/number of the dosage form in a given container shall be expressed in metric units, e.g. 60 mL (for liquids), 5 g (for sachets) 13)Name and Address of Marketing AuthoizationHolder The label shall state the name and full address of the MAH of the drug product. l4)Name and Address of Manufacturer The label shall state the name of the manufacturer and full address of the specific manufacturing site of the drug product as deterrnined by FDA. 15)Rx Symbol and Caution Statement (a) The labeling materials of prescription drug products shall always include the Rx symbol, which shall be prominently displayed. The Rx symbol may be allowed to be over-printed or superimposed, provided, that such will not result in the obliteration by or being rendered less legible than other required labeling information. (b) The caution statement, "Foods, Drugso Devices, and Cosmetics Act prohibits dispensing without prescription." shall alwaysnbe \'^ Page 1l of16 14,  included in the package inserto unit carton, primary label except blister pacl! foil strip, and small containers of prescription drug products. In addition, for products classified as Dangerous Drug as per Republic Act No. 9165, the caution statement shall be followed by an additional statement as specified by the Philippine Drug Enforcement Agency (PDEA). I 6) ADR Reporting Statement For the product information sheet and the unit carton or primary label except blister pack, foil strip, and small containers of products intended to be sold without a unit carton, the statement 'oFor suspected adverse drug reaction, report to the FIIA: www.fda.gov.ph" shall appear. In addition, a statement instructing the patient to seek medical attention immediately at the first sign of any adverse drug reaction shall appear. The MAH may also include a reporting statement for their own pharmacovigilance system. 1 7) Registration Number The label shall indicate the registration number assigned by FDA to the product, which is denoted by a combination of letters and/or numbers. l8)Batch Number and Lot Number The label shall indicate the product's batch number; provided, that if the entire batch is marketed by one drug establishment, only the batch number shall be indicated. However, if a batch is divided into lots marketed by different drug establishments, the lot number and corresponding batch number shall be indicated. l9)Expiration Date and Date of Manufacture (a) The label shall bear the month and year of the product's manufacturing and expiration date either in letters or rvords and numbers, or in numbers alone; if expressed in numbers alone, the year shall be stated completely in order to distinguish it from the month; and if the day is specified, the month shall be spelled out, as shown below: r June 2407 orJun20A7 o 4612007 o 03 June 2007 or 03 Jun 2007 (b) Unless a certain day of the month is specified, the last day of the stated month shall be deemed as the date of the product's expiration/manufacturing date. (c) For products reconstituted prior to use and those which can be administered multiple times (e.g. suspensions), the label shall include the period of guaranteed safety, efficacy, and quality of the reconstituted preparationlafter first opening at a given storage condition(s). \\ A ,ill,t- Y"'1fu B. Speciel Labeling Instructions In addition to the minimum mandatory requirements mentioned, the following shall be required to appear on the label of specific product types: 1) Parenterals For parenteral products, tle following additional information shall be required: (a) A statement of the recommended mode of administration such as "IV", "IM'or "SC", etc., as the case may be. (b) Where the product consists of a concentrated solution for injection, a direction not to administer the solution undiluted and a direction to dilute the solution with the specified diluent to the appropriate volume before use shall be stated. 2) Fluid Replacement Products (a) For fluid replacement products which follow the standard formulations contained in the cu:rent edition of the official compendium, the nomenclature to be adopted as the generic class name shall be determined by FDA. (b) For fluid replacement products not included in any offrcial compendium, FDA shall determine the generic class name. (c) Directly below the generic class name but still inside the generic outline box are the individual components (including excipients) with the corresponding mEqll or mmolll enumerated in the order of decreasing pharmacologrc activity. (d) Where one or more substances are amino acids and/or proteins, the total amount of nitrogen in the volume of fluid in the container shall be reflected. (e) The osmolality, such as "hypotonic" or "h54)er[onic"; and the pH value or range (where applicable) of the solution shall be indicated. 3) Products for External Use For products that are intended for external use, the statement "For external use only'' shall appear on all labeling materials, rendered in capital letters against a red background or printed in red font. 4) Biological Products For biological products, the following additional information shall be reflected on the Formulation: (a) The name of the species of animal or organism from which the product has been prepared. (b) The name of any adjuvant in the product or any substance which, when administered with an antigen, modifies the immune response to that antigen. 5) Multivitamin/ MineraV Herbal Products with Non-vitamin/ MineraV Herbal Components Multivitamins, consisting of at least three vitamins, and minerals, consisting of at least three mineral ingredients, shall have the following additional requirements: 0 /t t,t \^) /h {n-- ';;,t;A /'  (a) The generic name adopted for multivitamin-containing products shall be "Multivitamins"; for multi-mineral-containing products the official name shall be "Minerals". (b) For multivitamin and/or multi-minerul preparations containing at least three herbal ingredients, the generic class name of the herbal ingredients shall be "Herbs". (c) For multivitamin products with non-vitamin components (i.e. mineral or herbal ingredient), or multi-mineral products with non- mineral components (i.e. vitamin or herbal ingredient), or multi- herbal products with non-herbal components (i.e. vitamin or mineral ingredient) the term "Multivitamins" or "Minerals" or "Herbs", respectively, shall first be stated, followed by the generic name of the specific additional individual components, as shown below: Ex. Multivitamins * Iron Multivitamins * rron + Panax ginsengr. (American ginseng) rhizome Minerals * Ascorbic Acid + panax ginsengl (American ginseng) rhizome (d) The unit content of each vitamin, mineral, and/or herbal ingredient present shall no longer be required to be indicated in the generic box, but rather shall be reflected under Formulation. 6) Physician's Samples (a) In addition to the minimum requirements, each individual dosage unit of the physician's sample shall include batch andlor lot numbers, date of manufacture and expiration date. (b) On each of the labeling material(s), the following statement, shall appear in red background or red font: or Physician's S,*mple. Not fbr Sale 7) Drugs under Maximum Drug Retail Price (N{DRP) Control On the label of the minimum pack and the outer presentation of drugs listed under Section I of Executive Order No. 821 and other drugs as determined by the Secretary of Health, the following statement shall be required to appear in red background or red font: ,: _,,/+u  or {iNDI.]R DRI,{; PRI{-]E REGI]I",A'I]ION RF.I'AI|. PRI( ti; \{)'f TO UXC[{ED (price) 8) Reproductive Health Products The product information for reproductive health (RH) products that are drugs shall include both PI and PIL. The PIL shall be written in English and Filipino, and/or local dialect. The Departrnent of Health (DOH) and/or FDA may, from time to time, prescribe special labeling requirements for specific products. C. Exemptions The requisites provided in this Administrative Order shall not apply to the following cases: 1) Drug products manufactured for export; 2) Veterinary drug products; 3) If the container or primary pack containing the product is enclosed in a transparent covering and the particulars which are required to be set on the label on the container or primary pack are clearly visible through fransparent covering, the transparent covering is exempted, 4) Products that are compounded by a pharmacist in accordance with the individual prescription of a medical practitioner or dentist for immediate use; 5) Investigational products, 6) Foreign donations of drug products; 7) Products that require special handling or with special packaging (e.g. products that require cold-chain management, pre-filled syringes); and 8) Low volume of importation (