Business Data Communications & Networking - Chapter 5

BUSINESS DATA COMMUNICATIONS & NETWORKING Chapter 5 Network...

BUSINESS DATA COMMUNICATIONS & NETWORKING Chapter 5 Network and Transport Layers FitzGerald Dennis Durcikova Prepared by Taylor M. Wells: College of Business Administration, California State University, Sacramento 5-1 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Outline Transport Layer Protocols Network Layer Protocols Transport Layer Functions – Linking to the application layer – Segmenting – Session Management Network Layer Functions – Addressing – Routing TCP/IP Examples Implications for Management 5-2 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Network and Transport Layers Internet Transport Layer Model – Layer 4 in the Internet model – Links application and network layers – Responsible for segmentation and reassembly – Session management – Responsible for end-to-end delivery of messages Network Layer – Layer 3 in the Internet model – Responsible for addressing and routing of messages 5-3 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Protocols TCP/IP – Originally developed as a single internetworking protocol by Vint Cerf and Bob Kahn in 1974 – Later divided into the TCP and IP protocols – Most common protocols of the Internet and in LANs, WANs, and backbone networks 5-4 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved.  Transport Layer Protocols Transmission Control Protocol (TCP) – Most common transport layer protocol – PDU called a segment – Used for reliable transmission of data – 160 - 192 bits (20 -24 bytes) of overhead Options field is not required Heade ACK Source Sequenc r Unuse Flow Urgent Option User Destinati numbe Flags CRC-16 Port e Lengt d Control Pointer s Data on Port r (6 (16 (16 Number h (6 (16 (16 (32 (varies (16 bits) (32 bits) bits) bits) (32 bits) (4 bits) bits) bits) bits) ) bits) bits) 5-5 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Transport Layer Protocols User Datagram Protocol (UDP) – Operates at the transport layer – PDU called a segment – Used in time-sensitive situations, for control messages, or when reliability is handled by the application layer – 32-64 bits (4-8 bytes) of overhead Source port is optional in IPv4 and IPv6, Checksum is optional in IPv4 Lengt Checksu Source User Destinati h m Port Data on Port (16 (varies (16 bits) (16 (16 bits) ) bits) bits) 5-6 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Network Layer Protocols Internet Protocol (IP) – IP version 4 (IPv4) Most common version of IP used 32-bit addresses (232 or ~4.29 billion possible) Exhaustion of address space – IP version 6 (IPv6) 128-bit addresses (2128 or ~3.4 × 1038 possible) Slowly being adopted due to IPv4 exhaustion 5-7 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved.  Network Protocols IPv4 Packet – 160-192 bits (20-24 bytes) of overhead – Options field rarely used Versio Head Type CRC- Source Option n er of Total IDs Flags Packet Time to Protoc Destinati User 16 Addres s numb lengt servic length Offset Live / ol on Data s er h e Hop Address (16 (16 (3 (13 Limit (varie (16 (32 (32 (4 (4 (8 bits) bits) bits) bits) (8 bits) (8 bits) (32 bits) s) bits) bits) bits) bits) bits) bits) 5-8 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Network Protocols Optional Headers IPv6 Packet – Fixed Header – 320 bits (40 bytes) of overhead Traffic Flow Payload Hop Source Version Next Destinatio User Class / Label length Limit Address number Header n Address Data Priorit (varie y (20 (16 (8 (128 (4 bits) (8 bits) (128 bits) s) (8 bits) bits) bits) bits) bits) Optional Headers Hop-by hop options Destination options (with routing options) Routing Fragment Authentication Encapsulation Security Payload Destination options Mobility 5-9 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Transport Layer Functions 1. Linking to the application layer – TCP/UDP may serve multiple application layer protocols – Ports used to identify application (2-byte numbers) – Many source/destination ports follow standards – Common port standards HTTP: TCP port 80 HTTPS: TCP port 443 FTP: TCP ports 20 and 21 SMTP: TCP port 25 IMAP: TCP port 143 POP3: TCP port 110 (more commonly TCP port 995 secure version) DNS: TCP or UDP port 53 (most commonly UDP) 5-10 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Transport Layer Functions 5-11 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Transport Layer Functions 2. Segmenting – Breaking up large files into smaller segments (and putting them back together) – Segments may be passed individually to application layer or after reassembly – How large are the segments? Size depends on the network and data link layer protocols Maximum Segment Size (MSS) is negotiated during TCP handshake e.g., if the maximum size of the data in an Ethernet frame is 1,500 bytes and TCP and IP use 20 byte headers, the maximum segment size is 1460 bytes IPv4 header Ethernet Frame Data Size 1500 – 20 – 20 = 1460 bytes TCP header 5-12 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved.  Transport Layer Functions Sender PDU Receiver Applicatio Packet n Transport Segment Network Packet Data Frame Link 5-13 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Transport Layer Functions 3. Session management – A session can be thought of as a conversation between two computers or creating a virtual circuit – Using a session to send data is also called connection- oriented messaging (TCP) – Sending messages without establishing a session is connectionless messaging (UDP) – TCP connections are opened using a three-way handshake SYN SYN-ACK ACK – Sessions provide reliable end-to-end connections 5-14 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved.  Network Layer Functions Addressing – Used to direct messages from source to destination – Addresses are assigned in various ways (e.g., by system administrators, ICANN, hardware vendors, etc.) – Addresses exist at different layers – Addresses may be translated (resolved) from one layer to another (e.g., DNS, ARP) Address Type Example Example Address Application layer Uniform Resource Locator www.indiana.edu (URL) Network layer IP address 129.79.78.193 (4 bytes) Data link layer MAC address 1C-6F-65-F8-33-8A (6 5-15 Copyright © 2015 John Wiley & Sons, Inc. All rights bytes) reserved. Network Layer Functions Addressing – IPv4 addresses are 32 bits – Most common way to write is using dot-decimal notation Easier for people to read and remember Breaks the address into four bytes and writes each byte in decimal notation instead of binary Example: 129.79.78.193 1000000 0100111 0100111 1100000 1 1 0 1 5-16 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Network Layer Functions Addressing – A portion of an IP address represents the network and the rest identifies the host – Classful addressing Uses the first bits to determine number of hosts Discontinued, but nomenclature still used – Classless Inter-Domain Routing (CIDR) Uses subnet masks to more flexibly divide address space into subnets – IP address: 129.79.78.193 – Subnet Mask: 255.255.255.0 5-17 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Network Layer Functions Dynamic addressing – Configuring each device manually is time consuming – Assigning addresses permanently can be inefficient when devices are not connected to network – A server can supply IP addresses automatically – Dynamic Host Configuration Protocol (DHCP) Most common protocol for dynamic addressing Device sends out broadcast message DHCP responds with IP settings Addresses are “leased” for a length of time 5-18 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Network Layer Functions Address resolution – Host (server) name resolution Translate host name to IP address e.g., www.indiana.edu → 129.79.78.193 Domain Name Service (DNS) – MAC address resolution Identify MAC address of the next device in the circuit Address Resolution Protocol (ARP) 5-19 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Network Layer Functions 5-20 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Network Layer Functions Routing – Process of identifying what path to have a packet take through a network from sender to receiver – Routing Tables Used to make routing decisions Des Nex Shows which path to send packets on to reach a given t. t destination B B Kept by computers making routing decisions C B – Routers D D Special purpose devices used to handle routing decisions on the Internet E D Maintain their own routing tables F D G B 5-21 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Routing What are the possible paths from A to G? ABCG ABEFCG ADEFCG ADEBCG Simplified Routing Table for DesA Nex t. t B B C B D D E D F D G B 5-22 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved.  10.10.51.x 10.10.52.x 1 1 2 4 2 4 3 3 10.10.53.x BN 1 2 INTERNET 10.10.250.x 2 Simplified Routing Table Destinatio Interfac 1 n e 10.10.34.x 2 10.10.70.x 1 1 10.10.70.x 0.0.0.0 2 5-23 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved.  10.10.51.x 10.10.52.x 1 1 2 4 2 4 3 3 10.10.53.x BN 1 2 INTERNET 10.10.250.x 2 Simplified Routing Table Destination Interface 1 10.10.51.x 1 10.10.34.x 2 10.10.52.x 2 10.10.34.x 3 10.10.53.x 2 1 10.10.70.x 10.10.70.x 2 10.10.250.34 3 10.10.250.x 2 0.0.0.0 4 5-24 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Routing Centralized Routing – Routing decisions made by one computer – Not common anymore Decentralized Routing – Decisions made by each node independently of one another – Information needs to be exchanged to prepare routing tables – Used by the Internet 5-25 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Routing Static – Fixed routing tables – Manually configured by network managers – Local adjustments when computers added or removed Dynamic – Routing tables updated periodically – Routers exchange information using protocols to update tables 5-26 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Routing Dynamic routing algorithms – Distance vector: based on the number of “hops” between two devices – Link state: based on the number of hops, circuit speed, and traffic congestion Provides more reliable, up to date paths to destinations 5-27 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Routing Protocols Routing Information Protocol (RIP) – Dynamic distance vector protocol used for interior routing – Operation Network manager builds the routing table Routing tables broadcast periodically (e.g., every minute or so) When new computers are added, router counts “hops” and selects the shortest route – Useful in smaller, less complex networks 5-28 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Routing Protocols Open Shortest Path First (OSPF) – Dynamic link state protocol used for interior routing – Most widely used interior routing protocol on large enterprise networks – More reliable paths – Less burdensome to the network because only updates sent 5-29 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Routing Protocols Enhanced Interior Gateway Routing Protocol (EIGRP) – A dynamic link state protocol (developed by Cisco) – Records transmission capacity, delay time, reliability and load for all paths – Keeps the routing tables for its neighbors and uses this information in its routing decisions as well 5-30 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Routing Protocols If each network uses a different protocol internally, how are they able to communicate? Border Gateway Protocol (BGP) – Dynamic distance vector protocol used for exterior routing – Far more complex than interior routing protocols – Provide routing info only on selected routes (e.g., preferred or best route) 5-31 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved.  5-32 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Multicasting Unicast - one computer to another computer Broadcast - one computer to all computers in the network Multicast - one computer to a group of computers (e.g., videoconference) – Same data needs to reach multiple receivers and avoid transmitting it once for each receiver Particularly useful if access link has bandwidth limitations Many implementations at different layers In IP multicast, hosts dynamically join and leave multicast groups using Internet Group Management Protocol (IGMP) 5-33 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. TCP/IP Example Required network addressing information: 1. Device’s own IP address 2. Subnet mask 3. IP address of default gateway (most commonly the router) 4. IP address of at least one DNS server Obtained from a configuration file or DHCP 5-34 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Known Addresses, Same Subnet Suppose we have an HTTP request from Client in building A to Server in building B. 5-35 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. TCP/IP Examples 1. A Client (128.192.98.130) requests a Web page from a server (www1.anyorg.com) – Client knows the server’s IP 2. A Client (128.192.98.130) requests a Web page from a server (www2.anyorg.com) on a different subnet – Client knows the server’s IP 3. A Client (128.192.98.130) requests a Web page from a server (www1.anyorg.com) – Client does not know server’s IP 5-36 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. TCP/IP and Layers Host Computers – Packets move through all layers Gateways, Routers – Packet moves from Physical layer to Data Link Layer through the network Layer At each stop along the way – Ethernet packets is removed and a new one is created for the next node – IP and above packets never change in transit (created by the original sender and destroyed by the final receiver) Copyright 2011 John Wiley & Sons, Inc 5-37 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved.  5-38 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved. Implications for Management Organizations standardizing on TCP/IP – Decreases costs of equipment and training – Network providers are also moving towards standardization Slow transition to IPv6 5-39 Copyright © 2015 John Wiley & Sons, Inc. All rights reserved.