Part Analysis Report N° 20022024 7233 PDF

 Part Analysis Report **N° 20022024 7233** +-----------------------------------+-----------------------------------+ | **Customer P/N : ** | **06M.115.393.F** | +===================================+===================================+ | **BONTAZ...

 Part Analysis Report **N° 20022024 7233** +-----------------------------------+-----------------------------------+ | **Customer P/N : ** | **06M.115.393.F** | +===================================+===================================+ | **BONTAZ P/N :** | **269060** | +-----------------------------------+-----------------------------------+ | **8D Number:** | **200224 7233** | +-----------------------------------+-----------------------------------+ | --------------- | **1** | | **Quantity:** | | | --------------- | | +-----------------------------------+-----------------------------------+ | | | +-----------------------------------+-----------------------------------+ **Modification history** **Index** **Description** **Author** **Approved by** **Date** ----------- ----------------- ------------ ----------------- ------------ A Creation Hassna I.NASSIRI 02/09/2024 **Picture of the product** Summary ======= [[1.] [Summary] 3](#_Toc40363075) [[2.] [Traceability data of the part] 4](#traceability-data-of-the-part) [*[2.1.]* [Engraving on part] 4](#engraving-on-part) [[3.] [Di-electrical checking of the solenoid valve]](#_Toc40363079) [[4.] [Final control :]....9](#_Toc40363085) 5.Control by Xray............................................................................10**6.Conclusion.......................................................................................10** 1. Traceability data of the part ============================= 1. Engraving on part -----------------  Di-electrical checking of the solenoid valve ============================================ - **VISUAL CHECK**  **Leakage shall be less than 1 cc/min at the pressure of 5 +/- 0.5 bar:** **Result: The part is** **conformed** 3. **[x ray check ]** **OFF ON**  **Coil aspect is conformed.** **No missing component** **The activation on/off performed correctly no strange behavior founded.** Final control: ============== **To check the conformity of the part in hydraulic function, we checked the part by our final control bench.**  **The result of the first check on the EOL bench, after reciving the part is conform,** **P to A flow value 1,669 l/min ok on the minimum tolerence** **Flow rate specification \> 1.5 l/min** **SLR value 7.830 bar conforme** **no functionnel deviation was detected.** 5. **[Conclusion:]** **As mentioned below the part is conform on the EOL bench with flow rate on the minimum tolerance.** **P to A flow value 1,669 l/min ok on the minimum tolerence** **Flow rate specification \> 1.5 l/min** **We're working with the R&D team in order to increase the flow value on the maximum tolerance.**