Firefighter PPE and SCBA PDF

CHAPTER 3 Personal Protective Equipment and Self-Contained Breathing Apparatus (Fire Fighter I)  Fire Fighter I Objectives List the components of personal protective equipment (PPE) or the structural firefighting ensemble. Describe the type of protection provided by the stru...

CHAPTER 3 Personal Protective Equipment and Self-Contained Breathing Apparatus (Fire Fighter I)  Fire Fighter I Objectives List the components of personal protective equipment (PPE) or the structural firefighting ensemble. Describe the type of protection provided by the structural firefighting ensemble. Explain how each design element of a fire helmet works to protect the head, face, and eyes.  Fire Fighter I Objectives Explain why protective hoods are a part of the structural firefighting ensemble. Explain how each design element of a turnout coat works to protect the upper body. Describe how each design element of boots works to protect the feet.  Fire Fighter I Objectives Describe how each design element of gloves works to protect the hands and wrist. Explain how a personal alert safety system (PASS) helps to ensure fire fighter safety. List the limitations of PPE. Explain the role of the fighter’s work uniform as part of the PPE ensemble.  Fire Fighter I Objectives Describe how to inspect the condition of PPE. Describe how to properly maintain PPE. Describe the specialized protective clothing required for vehicle extrication and wildland fires. List the respiratory hazards posed by smoke and fire.  Fire Fighter I Objectives List the conditions that require respiratory protection or self-contained breathing apparatus (SCBA). Describe the differences between open-circuit breathing apparatus and closed-circuit breathing apparatus. Describe when a supplied-air respirator is used.  Fire Fighter I Objectives Describe the limitations of SCBA. Describe the physical and psychological limitations of an SCBA user. List and describe the major components of SCBA. Describe the devices on an SCBA that can assist the user in air management.  Fire Fighter I Objectives Describe the pathway that air travels through an SCBA. Explain the skip-breathing technique. Explain how to inspect SCBA to ensure that it is operation ready. List the complete sequence of donning PPE.  Fire Fighter I Objectives Describe the importance of SCBA inspections and SCBA operational testing. Explain the procedures for refilling SCBA cylinders.  Introduction Two safety components used by fire fighters need special consideration: – Personal protective equipment (PPE) – Self-Contained breathing apparatus (SCBA)  Introduction PPE protects the body against limited amount of heat. SCBA allows fire fighters to enter smoky and toxic areas and provides respiratory protection for limited time.  Personal Protective Equipment Essential to a fire fighter’s safety – Must provide full body coverage and protection from a variety of hazards – Must be cleaned, maintained, and inspected regularly.  Structural Firefighting Ensemble Enables fire fighters to work in areas with high temperatures and toxic gases Designed to be worn with self-contained breathing apparatus (SCBA) Structural Firefighting Ensemble  Helmet Must meet NFPA 1971 Standard Provides impact protection against falling objects Often color-coded according to rank and function Must have a label permanently  Protective Hood Covers exposed skin Constructed of flame- resistant materials Worn over the face piece but under the helmet  Turnout Coat Three layers: – Protective outer shell – Moisture barrier – Thermal barrier Flap provides a secure double seal. Come in two styles— long and short  Bunker Pants Constructed to match turnout coat. Three-layer protective system Should be large enough to don quickly and move easily  Boots Constructed of rubber or leather Must meet NFPA 1971 requirements Outer layer repels water and is flame- and cut-resistant. Inner liner adds thermal protection.  Gloves Protect from heat, liquid, vapors, cuts, and penetration Required wristlets Usually constructed of heat-resistant leather  Personal Alert Safety System Electronic device that sounds a loud signal if a fire fighter: – Is motionless for a set period – Activates it Can be separate or integrated into the SCBA unit  Additional PPE Approved goggles Intercom system Flexible ear plugs Hand light Radio Reflective vest Drag rescue device  Limitations of the Structural Firefighting Ensemble Tasks requires energy and strength Retains body heat and perspiration Limits mobility and range of motion Decreases normal sensory abilities  Work Uniforms Clothing containing nylon or polyester may melt. Synthetic fibers are resistant to high temperature.  Donning and Doffing PPE Donning PPE must be done in a specific order to obtain maximum protection. To doff PPE, reverse the procedure used in getting dressed.  Care of PPE Check the condition of PPE regularly. Repair worn or damaged PPE at once. Clean PPE when necessary. – Badly soiled by exposure – Exposed to chemicals or hazardous materials Follow the manufacturer’s instructions.  Specialized Protective Clothing Vehicle extrication – PPE is generally lighter and more flexible than structural firefighting PPE. – Latex gloves should be worn when providing patient treatment. – Eye protection also should be worn.  Specialized Protective Clothing Wildland fires – PPE must meet NFPA 1977. – Made of fire-resistant materials – Designed for comfort and maneuverability – Helmet, eye protection, gloves, and boots designed for comfort and sure footing  Respiratory Protection The interior atmosphere of a burning building is considered immediately dangerous to life and health (IDLH). Fire fighters must be proficient in using SCBA before engaging in interior fire-suppression activities. Respiratory Hazards of Fires: Smoke Three major components: – Smoke particles – Smoke vapors – Toxic gases Carbon monoxide Hydrogen cyanide Phosgene  Respiratory Hazards of Fires: Oxygen Deficiency Occurs in two ways: – Fire consumes available oxygen. – Fire produces gases that displace oxygen. Can lead to disorientation, inability to control muscles, and irrational thinking  Respiratory Hazards of Fires: Increased Temperature Inhaling the superheated gases produced by a fire can cause severe burns of the respiratory tract.  Other Toxic Environments Fire fighters will encounter toxic gases or oxygen-deficient atmospheres in many emergency situations, including: – Hazardous materials releases – Confined-space or below-grade structures Conditions that Require Respiratory Protection SCBA must be used: – In enclosed areas where there is smoke – During overhaul until the air has been tested – Whenever toxic gases or an oxygen-deficient atmosphere is possible Golden rule: Always assume that the atmosphere is hazardous!  Types of Breathing Apparatus Open-circuit SCBA – Used for structural firefighting – Tank of compressed air provides supply – Exhaled air is released into the atmosphere  Types of Breathing Apparatus Closed-circuit SCBA – Used for extended operations – Air passes through a mechanism that removes carbon dioxide and adds oxygen within a closed system.  Types of Breathing Apparatus Supplied-air respirator – Uses a hose line connected to a breathing-air compressor or to compressed air cylinders – Sometimes used for specialized operations  SCBA Standards and Regulations NIOSH – Sets the design, testing, and certification requirements for SCBA OSHA and state agencies – Responsible for establishing and enforcing regulations for respiratory protection  SCBA Standards and Regulations NFPA standards related to SCBA: – NFPA 1500: Basic requirements – NFPA 1404: Requirements for SCBA training – NFPA 1981: Requirements for design, performance, testing, and certification of open-circuit SCBA  Limitations of SCBA Use is limited by amount of air in cylinder Fire fighters must consider: – Time and effort required to reach destination – Amount of air available once destination is reached – Amount of time needed to complete task – Amount of time to reach a safe area  Limitations of SCBA Added weight and bulk decrease flexibility and mobility Face piece can limit visibility May affect ability to communicate May limit hearing  Physical Limitations of the User Moving with the extra weight of SCBA and PPE requires additional energy, which increases air consumption and body temperature.  Psychological Limitations of the User Breathing through an SCBA can be very stressful. – The surrounding environment is foreign as well. – Fire fighters must adjust to these stressful conditions.  Components of SCBA Backpack – Frame for mounting the other working parts of the SCBA Harness – Straps and fasteners to attach the SCBA to the fire fighter  Components of SCBA Air cylinder – Holds breathing air for an SCBA – Equipped with a hand-operated shut-off valve – Pressure gauge shows amount of pressure currently in cylinder  Components of SCBA Regulator assembly – Controls flow of air – Some have a dual- path pressure reducer – Activation requires: Opening cylinder valve Donning SCBA Attaching regulator to face piece  Components of SCBA Regulator assembly (cont’d) – Contains a pressure gauge Requires a second heads-up display. – NFPA requires SCBA to include end-of-service-time- indicator (EOSTI) or low-air alarm.  Components of SCBA Regulator assembly (cont’d) – Some include PASS device. – Equipped with rapid intervention crew/ company universal air connection (RIC UAC)  Components of SCBA Face piece assembly – Delivers breathing air – Consists of: Face mask Exhalation valve Regulator – Should cover the entire face – Must be annually fit- tested  Pathway of Air Through an SCBA Air passes through the cylinder shut-off valve into the high-pressure hose that takes it to the regulator. Regulator sends air into the face piece and to the user.  Pathway of Air Through an SCBA When the user exhales, used air is returned to the face piece. Exhaled air is exhausted from the face piece through the exhalation valve.  Skip-Breathing Technique Take a short breath, hold, take a second short breath. – Do not exhale in between breaths. Relax with a long exhale. Each breath should take 5 seconds.  Mounting Breathing Apparatus The SCBA should be located so that fire fighters can don it quickly. – Seat-mounted brackets – Compartment-mounted brackets – Exterior-mounted SCBA  Donning SCBA Before beginning, fire fighters must: – Check that air cylinder has 90% pressure. – Be sure donning/doffing switch is activated. – Open the cylinder and listen for alarm. – Check the pressure gauges. – Check that harness straps are fully extended. – Check that valves are in the correct position. Donning SCBA From an Apparatus Seat Mount Don all protective clothing. Place arms through the shoulder straps. On arriving at the scene, activate bracket release, and exit apparatus. Attach waist strap; tighten and adjust shoulder and waist straps. Donning SCBA From a Compartment Mount Slide arms through the shoulder harness straps. Release SCBA from mounting bracket. Adjust shoulder straps. Attach ends of the waist strap and tighten.  Donning SCBA From the Ground, Floor, or Storage Case Over-the-head – Grasp the back plate with both hands and lift the SCBA over your head. Coat – Grasp one shoulder strap close to the back plate and the other farther from the plate. – Swing the SCBA over your left shoulder.  Donning the Face Piece The face piece must be the correct size, and it must be adjusted to fit the face. – There must be no facial hair in the seal area. – Eyeglasses that pass through the seal area cannot be worn.  Safety Precautions for SCBA Before entering environment, activate PASS device. Properly log into accountability system. Work in teams of two. Have at least two fire fighters outside.  SCBA Use During Emergency Situations Keep calm, stop, and think. Control your breathing. If SCBA problems are experienced, exit the IDLH area. If you are in danger, follow self-survival steps and call a mayday.  Doffing SCBA Follow procedures recommended by the manufacturer and your department’s SOPs. Reverse the steps for donning the SCBA.  Putting It All Together Place the protective hood over your head. Put on your bunker pants and boots. Put on your turnout coat and secure. Open the air-cylinder valve on SCBA, and check the air pressure. Put on your SCBA.  Putting It All Together Tighten both shoulder straps. Attach the waist belt and tighten it. Fit the face piece to your face. Pull the protective hood up. Place your helmet on. Turn up your coat collar.  Putting It All Together Put gloves on. Check your clothing. Be sure your PASS device is turned on. Attach your regulator or turn it on. Work safely.  SCBA Inspection and Maintenance Must be properly serviced each time it is used. – Air cylinder must be changed or refilled. – Face piece and regulator must be sanitized. – Unit must be cleaned, inspected, and checked for proper operation.  SCBA Inspection and Maintenance If inspection reveals any problems that cannot be remedied, remove from service for repair. Only properly trained and certified personnel are authorized to repair SCBA.  Inspection of SCBA SCBA should be inspected to identify parts that are damaged or need repair. Operational testing checks the functioning parts of SCBA. – Should be done after each use and at the beginning of each shift or on a set schedule.  Inspection of SCBA Annual inspection – Must be performed on each SCBA. – Must be performed by: Certified manufacturer’s representative or Person who has been trained and certified  Servicing SCBA Cylinders Cylinders must be visually inspected during daily and monthly inspections. Federal law requires periodic hydrostatic testing and limits the number of years a cylinder can be used.  Replacing SCBA Cylinders A single fire fighter must doff an SCBA to replace the air cylinder. Two fire fighters working together can change cylinders without removing the SCBA. A fire fighter should be able to change cylinders in the dark and while wearing gloves.  Refilling SCBA Cylinders Compressors and cascade systems are used to refill SCBA cylinders. Proper training is required to fill SCBA cylinders.  Cleaning and Sanitizing SCBA Follow manufacturers’ instructions. Rinse the unit with clean water. Clean the harness assembly and cylinder with mild soap and water. Clean the face pieces and regulators with mild soap and water or a disinfectant solution.  Summary Personal protective equipment is essential to a fire fighter. Structural firefighting PPE allows fire fighters to work in burning buildings, elevated temperatures, and toxic gases. PPE consists of a bunker coat and pants, helmet, protective hood, boots, SCBA, PASS, and additional equipment.  Summary Structural PPE adds weight. Fire fighters should be able to don PPE in less than 1 minute. PPE should be checked regularly. PPE should be kept clean. Gloves and coveralls or jumpsuits are used during vehicle extraction.  Summary PPE for wildland fires includes a jacket and pants made of fire-resistant materials, helmet, eye protection, and pigskin or leather gloves. The two main types of SCBA are open-circuit and closed-circuit devices. SCBA limits the amount of air in the cylinder.  Summary Breathing through an SCBA is different than breathing normally and can be stressful. SCBA consists of a backpack and harness, air cylinder assembly, regulator assembly, and face piece assembly. Air passage through SCBA follows a specific pathway.  Summary Skip-breathing conserves air. SCBA must be checked regularly. SCBA cylinders are refilled via compressors and cascade systems. Follow the 18 steps to correctly don PPE.