Podcast
Questions and Answers
What is required to mount a Thrustmaster T150 or TMX to the stand?
What is required to mount a Thrustmaster T150 or TMX to the stand?
- Three conical screws (M6x20)
- Two Allen screws (M6x25)
- The original clamp that comes with the wheels (correct)
- An additional mounting plate
Which Allen screw is specific to mounting the T3PA PRO pedals?
Which Allen screw is specific to mounting the T3PA PRO pedals?
- M6x50 (correct)
- M6x25
- M6x40
- M6x16
How many Allen screws are used to mount the G25, G27, G29, G920, or G923 pedal set?
How many Allen screws are used to mount the G25, G27, G29, G920, or G923 pedal set?
- One M6x50 screw
- Four M6 screws
- Three M6x40 screws (correct)
- Two M6x40 screws
What actions must be taken to mount a TH8A or TH8RS shifter?
What actions must be taken to mount a TH8A or TH8RS shifter?
What is the Allen screw type used for mounting a Thrustmaster TX or T300RS?
What is the Allen screw type used for mounting a Thrustmaster TX or T300RS?
Which of the following is NOT included in the stand contents?
Which of the following is NOT included in the stand contents?
Which screw is used when mounting the G25, G27, G29, G920, or G923 wheels to the stand?
Which screw is used when mounting the G25, G27, G29, G920, or G923 wheels to the stand?
What type of screw should be driven to connect the T500RS wheel to the main plate?
What type of screw should be driven to connect the T500RS wheel to the main plate?
Flashcards are hidden until you start studying
Study Notes
Set Up Videos
- Access setup videos for Wheel Stand Pro on their YouTube channel.
Stand Contents
- Universal gear shifter plate included for G25/G27/029/G920/G923 and T500 shifter.
- S-shaped gear shifter plate is not included with the stand.
Mounting Thrustmaster T150 or TMX
- Utilize the original clamp that comes with Thrustmaster T150 or TMX for mounting.
Mounting Thrustmaster TX, T300RS, TGT, T500RS, or F430
- Requires 2 Allen screws (M6x16) for secure mounting.
Mounting T3PA Pro Pedal Set
- Position T3PA PRO pedals centrally on the stand.
- Use 3 Allen screws (M6x40) to secure pedals.
- An additional Allen screw (M6x50) is designated for G-series and T3PA pedals.
Mounting T500RS Pedal Set
- Place T500RS Pedal Set on the stand.
- Secure with 3 Allen screws (M6x40).
Mounting G25, G27, G29, G920, or G923 Pedal Set
- Position pedal set on the stand and fix with 3 Allen screws (M6x40).
- Allen screw (M6x50) applies to G-series and T3PA pedals only.
Mounting TH8A or TH8RS Shifter
- Remove the original clamp of TH8A/TH8RS shifter.
- Position shifter on the gear shifter plate and secure with 2 Allen screws (M6x16).
Mounting T500RS Wheel
- Connect the gear shifter plate to the main plate using 1 conical screw (M6x20) and 1 nut (M6).
- Mount the T500RS wheel on the main plate using 1 Allen screw (M6x25) from below.
Mounting G25, G27, G29, G920, or G923 Wheel
- For G-series wheels, connect the gear shifter plate to the main plate using 2 conical screws (M6x20) and 2 nuts (M6).
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
