Weapons and Ordnance Operations Quiz
65 Questions
100 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Can you perform release and control checks with weapons/stores and counter measures loaded?

False

Can you perform jettison system checks with stores loaded on the BRU-14?

True

What must be removed prior to performing a jettison system check?

CADS

How long after completing release and control checks do you have to load weapons/stores?

<p>24 HOURS</p> Signup and view all the answers

Once weapons are loaded, how long may they remain loaded?

<p>72 HOURS</p> Signup and view all the answers

Release and control checks need not be performed provided that on the previous mission (within 24 hours) the same type weapon/store to be loaded was successfully dropped/fired and no reconfiguration is required or no weapons system maintenance has been performed since the last mission.

<p>True</p> Signup and view all the answers

What publication is utilized to perform the IZLID 1000 boresight?

<p>11-95IZLID-1</p> Signup and view all the answers

If the LAU-61C/A is dropped, can the rockets in the pod be utilized?

<p>False</p> Signup and view all the answers

Mode selector on the LAU-61C/A must be set to which mode?

<p>SINGLE</p> Signup and view all the answers

What must we set the intravolmeter to prior to take off?

<p>A</p> Signup and view all the answers

When will we remove the aft radhaz barrier?

<p>PRIOR TO LAUNCH</p> Signup and view all the answers

If punctures or tears go through the radhaz barrier, the LAU-61C/A must be?

<p>REJECTED</p> Signup and view all the answers

What is the purpose of the certification board?

<p>To ensure that everyone, prior to handling ordnance, has the proper certifications and has received the proper training.</p> Signup and view all the answers

What are the main causes of accidents?

<p>LACK OF KNOWLEDGE, COMPLACENCY, AND MISUNDERSTANDING</p> Signup and view all the answers

What is the role of the QA/SO during a gun jam evolution?

<p>SAFETY OBSERVE, ENSURE THE TL AND THE REST OF THE TEAM IS FOLLOWING THE CHECKLIST</p> Signup and view all the answers

How many tubes can be inoperable on a rocket pod?

<p>3</p> Signup and view all the answers

How many rivets can be missing before you have to reject the pod?

<p>MISSING RIVETS ARE FINE</p> Signup and view all the answers

What is the checklist for rockets?

<p>A1-H60RA-LWS-750</p> Signup and view all the answers

What impulse cartridge do we use for chaff/flare?

<p>CCU-136</p> Signup and view all the answers

What is the minimum amount of personnel needed to install buckets?

<p>QASO, TL AND TM</p> Signup and view all the answers

What is the hero manual?

<p>NAVSEAOP 3565/ NAVAIR 16-1-529</p> Signup and view all the answers

How long is an explosive physical good for?

<p>5 YEARS</p> Signup and view all the answers

What form is the explosive physical form?

<p>8020/6</p> Signup and view all the answers

What form is the ordnance cert for that lists work task codes and cert level that certifies you?

<p>8020/5</p> Signup and view all the answers

What form is the AA&E security screening form?

<p>OPNAV 5530/1</p> Signup and view all the answers

What is TD?

<p>TECHNICAL DIRECTIVES) A CHANGE IN A PUBLICATION (AWB AND AWC ARE CLASSIFIED AS TD'S)</p> Signup and view all the answers

Where in a pub can you find TD?

<p>INTRODUCTION CHAPTER ONE</p> Signup and view all the answers

How often is a page 13 for AA&E signed?

<p>EVERY YEAR</p> Signup and view all the answers

What does HERO stand for?

<p>HAZARDOUS ELECTROMAGNETIC RADIATION TO ORDNANCE</p> Signup and view all the answers

What is TPDR?

<p>TECHNICAL PUBLICATION DEFICIENCY REPORT</p> Signup and view all the answers

What is CODR?

<p>CONVENTIONAL ORDNANCE DEFICIENCY REPORT</p> Signup and view all the answers

What is EMR?

<p>EXPLOSIVE MISHAP REPORT</p> Signup and view all the answers

What is EER?

<p>EXPLOSIVE EVENT REPORT</p> Signup and view all the answers

What is NAR?

<p>NOTICE OF AMMUNITION RECLASSIFICATION</p> Signup and view all the answers

What does NALC represent?

<p>NAVAL AMMUNITION LOGISTICS CODE</p> Signup and view all the answers

What does DODIC stand for?

<p>DEPARTMENT OF DEFENSE IDENTIFICATION CODE</p> Signup and view all the answers

What is ATR?

<p>AMMUNITION TRANSACTION REPORTING</p> Signup and view all the answers

What does AWIS refer to?

<p>ALL WEAPONS INFORMATION SYSTEM (WHERE WE GO TO WRITE CODR'S)</p> Signup and view all the answers

What is MDD?

<p>MAINTENANCE DUE DATE</p> Signup and view all the answers

What does ECM stand for?

<p>ELECTRONIC COUNTERMEASURES</p> Signup and view all the answers

Shelf life is defined as _

<p>THE DATE IT WAS MANUFACTURED, THE AMOUNT OF TIME THAT IS ALLOTTED FOR AN ITEM TO SIT IN INVENTORY, BEFORE IT EXPIRES.BEFORE ITS INITIAL USE.</p> Signup and view all the answers

Service life starts when _

<p>YOU OPEN THE CAN, WHEN IT'S HERMETIC SEAL IS BROKEN.</p> Signup and view all the answers

What is a CODR?

<p>AN INCIDENT WHERE ORDNANCE OR WEAPONS SYSTEM FAILED TO FUNCTION IN ACCORDANCE WITH THE DESIGNED AND/OR INTENT OF THE SYSTEM.</p> Signup and view all the answers

What is an ATR used for?

<p>A METHOD OF REPORTING TRANSACTIONS INVOLVING NAVAL CONVENTIONAL ORDNANCE.</p> Signup and view all the answers

What does the yellow tag indicate?

<p>SERVICEABLE</p> Signup and view all the answers

What does the blue tag indicate?

<p>SERVICEABLE, TEST/MODIFICATION</p> Signup and view all the answers

What does the green tag indicate?

<p>UNSERVICEABLE, CAN BE REPAIRED</p> Signup and view all the answers

What does the brown tag indicate?

<p>SUSPENDED</p> Signup and view all the answers

What does the red tag indicate?

<p>UNSERVICEABLE, CONDEMNED</p> Signup and view all the answers

What does CATM stand for?

<p>CAPTIVE AIR TRAINING MISSILE (CAN BE LOADED ON AIRCRAFT)</p> Signup and view all the answers

What does DATM stand for?

<p>DUMMY AIR TRAINING MISSILE (GROUND TRAINING ONLY; CAN NOT BE LOADED ON AIRCRAFT, GOLD STRIP ON MISSILE)</p> Signup and view all the answers

How are NAR's distributed?

<p>BY NAVAL MESSAGE</p> Signup and view all the answers

Who is overall in charge of safety?

<p>QASO</p> Signup and view all the answers

Who is overall in charge of evolutions?

<p>TL</p> Signup and view all the answers

If there is a date conflict between a checklist and pub, which one do you use?

<p>WHICHEVER ONE IS MOST CURRENT</p> Signup and view all the answers

What are the timeframes for CODR?

<p>REPORT SHALL BE SUBMITTED WITHIN 24 HOURS AS OPERATIONAL TEMPO ALLOWS NOT TO EXCEED 72 HOURS SCREENING POINT.</p> Signup and view all the answers

What should be marked on the CAD can right away?

<p>OPEN DATE, AND EXPIRATION DATE</p> Signup and view all the answers

How many weep holes are on the AGM-114?

<p>6</p> Signup and view all the answers

How many thunderstorm conditions are there?

<p>2</p> Signup and view all the answers

Can tools be passed over a weapon?

<p>False</p> Signup and view all the answers

What is the first thing you should do at the start of a missile inspection?

<p>MAKE SURE THE MISSILE IS SAFE</p> Signup and view all the answers

Who can stop an evolution?

<p>ANYBODY</p> Signup and view all the answers

How many numbers are in a NAR?

<p>8, FIRST FOUR ARE NUMBER OF NAR THAT YEAR AND LAST FOUR IS THE YEAR (0001-2019)</p> Signup and view all the answers

What is included in the NOMP?

<p>EVERYTHING ABOUT ORDNANCE FROM INSPECTIONS TO WHAT TO DO AT EACH LEVEL OF MAINTENANCE TO MDD'S/MEN'S</p> Signup and view all the answers

What is the formula to determine the expiration date of a CAD?

<p>TAKE THE NUMBER OF MONTHS OF THE SHELF LIFE ADD IT TO THE MANUFACTURING DATE OF THE CAD THEN TAKE THE NUMBER OF MONTHS OF THE INSTALL LIFE AND ADD IT TO THE CAD'S CONTAINER OPEN DATE THEN BETWEEN THE TWO RESULTING FIGURES YOU USE THE DATE THAT EXPIRES FIRST AND THAT IS THE CAD'S EXPIRATION DATE.</p> Signup and view all the answers

Study Notes

Weapons and Ordnance Operations

  • Release and control checks cannot be performed with weapons, stores, and countermeasures loaded.
  • Jettison system checks can be performed with stores loaded on the BRU-14, but CADS must be removed beforehand.
  • Weapons/stores must be loaded within 24 hours of completing release and control checks.
  • Once weapons are loaded, they can remain loaded for a maximum of 72 hours.
  • Release and control checks do not need to be repeated if the same type of weapon/store was successfully utilized within the last 24 hours without reconfiguration or maintenance.

Publications and Forms

  • The IZLID 1000 boresight procedure is documented in 11-95IZLID-1.
  • The hero manual is provided in Navseaop 3565/Navair 16-1-529.
  • Explosive physicals are good for five years; the explosive physical form is 8020/6.
  • The Ordnance certification form for work task codes is 8020/5.
  • The AA&E security screening form is OPNAV 5530/1.

Safety and Regulations

  • The Certification Board ensures all personnel handling ordnance have the necessary training and certifications.
  • Main causes of accidents involve lack of knowledge, complacency, and misunderstanding.
  • The QA/SO’s role during a gun jam evolution is to observe safety and ensure adherence to the checklist.
  • A maximum of three tubes may be inoperable on a rocket pod; missing rivets on a pod do not necessitate rejection.

Tags and Identifications

  • Yellow tag indicates serviceable status.
  • Blue tag denotes serviceable condition with test/modification.
  • Green tag indicates unserviceable but repairable status.
  • Brown tag signifies suspended status.
  • Red tag identifies items that are unserviceable and condemned.

Reporting and Documentation

  • CODR (Conventional Ordnance Deficiency Report) refers to incidents where ordnance fails to function as intended.
  • ATR (Ammunition Transaction Reporting) is used to report transactions involving naval ordnance.
  • The NAR (Notice of Ammunition Reclassification) is distributed via naval message.
  • Page 13 for AA&E is signed annually.

Miscellaneous

  • HERO stands for Hazardous Electromagnetic Radiation to Ordnance.
  • Explosives are categorized by shelf life (time before initial use) and service life (starts upon opening the container).
  • The formula to determine the expiration date of a CAD involves adding the months of shelf life and install life to their respective dates and using the earliest date as the expiration.

Emergency Procedures

  • Ensure any missile is safe before starting its inspection.
  • Any individual can stop an evolution if necessary.
  • Tools must not be passed over weapons during handling operations.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Quiz Team

Description

Test your knowledge on weapons and ordnance operations, including safe handling, loading protocols, and necessary documentation. This quiz covers essential safety regulations and the correct procedures to follow when dealing with military ordnance and related publications. Ensure you understand all critical guidelines and certifications.

More Like This

Use Quizgecko on...
Browser
Open
Browser
Browser