Podcast
Play an AI-generated podcast conversation about this lesson
Questions and Answers
Conductivity is a very useful test for assessing sea water intrusion into sewer lines.
Conductivity is a very useful test for assessing sea water intrusion into sewer lines.
- True (correct)
- False
Total solids are made up of dissolved and suspended solids, both of which contain organic and inorganic matter.
Total solids are made up of dissolved and suspended solids, both of which contain organic and inorganic matter.
- False
- True (correct)
A pH value less than 7 indicates an alkaline or basic condition.
A pH value less than 7 indicates an alkaline or basic condition.
- True
- False (correct)
BOD5 and TSS are both used to measure the strength of wastewater.
BOD5 and TSS are both used to measure the strength of wastewater.
Signup and view all the answers
Which of the following statement(s) is/are true with regards to BOD?
Which of the following statement(s) is/are true with regards to BOD?
Signup and view all the answers
What is the purpose of using conductivity as a test for assessing sea water intrusion into sewer lines?
What is the purpose of using conductivity as a test for assessing sea water intrusion into sewer lines?
Signup and view all the answers
What is the typical BOD content of domestic wastewater?
What is the typical BOD content of domestic wastewater?
Signup and view all the answers
In what units is settleable solids commonly measured using an Imhoff cone?
In what units is settleable solids commonly measured using an Imhoff cone?
Signup and view all the answers
Which statement(s) about BOD are true?
Which statement(s) about BOD are true?
Signup and view all the answers
What does a pH value less than 7 indicate?
What does a pH value less than 7 indicate?
Signup and view all the answers
What are total solids made up of?
What are total solids made up of?
Signup and view all the answers
