Mikrotik MTCINE-03
10 Questions
3 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Qual o estado inicial de uma sessão BGP antes da conexão TCP ser estabelecida?

  • Established
  • Active
  • Idle (correct)
  • OpenSent

    • O atributo "Weight" é compartilhado entre roteadores BGP em um mesmo AS.

    False (B)

    Qual das seguintes práticas é recomendada ao usar "Route Reflectors"?

  • Evitar o uso de filtros prefix-list.
  • Configurar "Cluster ID" para evitar loops de roteamento. (correct)
  • Habilitar "Redistribute Other BGP" por padrão.
  • Evitar o uso de atributos AS-Path.

    • O atributo "Local Preference" no BGP é usado para:

    <p>Determinar o melhor caminho de saída dentro do mesmo AS. (B)</p> Signup and view all the answers

    Qual é o formato padrão do BGP Route Identifier (Router ID)?

    <p>Um endereço IPv4. (A)</p> Signup and view all the answers

    O PHP (Penultimate Hop Popping) melhora o desempenho removendo o rótulo MPLS no penúltimo salto.

    <p>True (A)</p> Signup and view all the answers

    O que é "Label Distribution Protocol" (LDP) no MPLS?

    <p>Um método para distribuir rótulos entre roteadores. (B)</p> Signup and view all the answers

    Qual a função do campo "EXP" no cabeçalho MPLS?

    <p>Determinar a classe de serviço (CoS). (A)</p> Signup and view all the answers

    Qual das opções abaixo é um tipo de roteador no MPLS?

    <p>Customer Edge Router (CE) (B)</p> Signup and view all the answers

    Qual configuração é necessária para ativar o MPLS em um roteador MikroTik?

    <p>Configurar /mpls ldp e habilitar interfaces MPLS. (B)</p> Signup and view all the answers

    Flashcards

    Initial BGP session state

    The state of a BGP session before a TCP connection is established.

    BGP Weight attribute

    Not shared between BGP routers in the same Autonomous System (AS).

    Route Reflectors and loops

    Configure a "Cluster ID" to prevent routing loops when using BGP Route Reflectors.

    BGP Local Preference

    Used to determine the best exit path within the same Autonomous System (AS).

    Signup and view all the flashcards

    BGP Route Identifier format

    An IPv4 address.

    Signup and view all the flashcards

    BGP Penultimate Hop Popping (PHP)

    Improves performance by removing MPLS label on the penúltimo hop.

    Signup and view all the flashcards

    LDP in MPLS

    A method for distributing labels between routers.

    Signup and view all the flashcards

    MPLS EXP field

    Determines the Class of Service (CoS).

    Signup and view all the flashcards

    MPLS CE Router

    A type of router within MPLS network.

    Signup and view all the flashcards

    MPLS MikroTik configuration

    Requires configuration /mpls ldp and enable MPLS interfaces.

    Signup and view all the flashcards

    More Like This

    Mikrotik MTCINE-01
    10 questions

    Mikrotik MTCINE-01

    FoolproofPanther4927 avatar
    FoolproofPanther4927
    Mikrotik MTCINE-02
    10 questions

    Mikrotik MTCINE-02

    FoolproofPanther4927 avatar
    FoolproofPanther4927
    Mikrotik MTCINE-06
    10 questions

    Mikrotik MTCINE-06

    FoolproofPanther4927 avatar
    FoolproofPanther4927
    Mikrotik MTCINE-07
    8 questions

    Mikrotik MTCINE-07

    FoolproofPanther4927 avatar
    FoolproofPanther4927
    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser