4AE3 U3 C3 Hard Test

Which organization does ANSI recognize standards developed by?

What is ANSI K61.1 Safety Requirements for?

Which regulations typically fall under local municipal regulations?

What may local regulations specify the location of?

What is the prime consideration for all the organizations discussed above?

Which organizations are represented on the committee responsible for making rules and regulations regarding boiler and pressure vessel construction and inspection?

What are the two purposes of the code discussed in the text?

Which section of the code covers the requirements for registering boiler, pressure vessel, or fitting designs?

What does the section on 'Piping and Fittings' in the code primarily cover?

Before pressure equipment can be repaired or altered, what must be obtained?

Which section of the code primarily covers the requirements for machinery rooms?

Which group of refrigerants is the most toxic?

What does section 7 of the code address regarding pressure relief?

Which building occupancy classification is NOT mentioned in the text?

What is the classification of refrigeration systems based on?

Which type of fluids do organic fluid vaporizers boil to produce high-pressure vapor?

Which part of the code contains the general rules for the materials and design of organic fluid vaporizers?

Which specific rules are used together with the general rules of Part PG for organic fluid vaporizers?

Which appendices in the code provide additional information necessary for proper code application?

Which topics are covered in the Mandatory Appendices of the code?

Which type of fluids do organic fluid vaporizers boil to produce high-pressure vapor?

Which section of the code contains general rules for the materials and design of organic fluid vaporizers?

Which specific components of organic fluid vaporizers have specific rules in addition to the general rules of Part PG?

Which type of appendices in the code are necessary to properly apply the code?

Which topics are covered in the Mandatory Appendices of the code?

Which part of the ASME IV code covers requirements for boilers fabricated by welding?

Which part of the ASME IV code covers requirements for boilers constructed of cast iron?

Which part of the ASME IV code covers requirements for portable water heaters?

Which type of boilers are covered in the Non-Mandatory Appendices of the ASME IV code?

Which part of the ASME IV code covers rules for mass production of heating boilers?

Which of the following is NOT a component found on a heating boiler?

Which of the following is NOT a type of fuel burning equipment found on heating boilers?

Which of the following is NOT a topic covered in the rules for boiler room facilities?

Which of the following is NOT a procedure covered in the rules for operating, maintaining, and repairing steam boilers?

Which of the following is NOT a procedure covered in the rules for operating, maintaining, and repairing hot water boilers?

Which code takes precedence over CSD-1 requirements when modifications are made to a gas burner control system in Canada?

What is the maximum boiler horsepower capacity covered by CSD-1?

Which organization developed the CSA B51 Code?

What is the purpose of the ASME and CSA codes and standards?

What is the main responsibility of provincial officers in jurisdictions that have adopted the ASME and CSA codes and standards?