GTS Mod 3 Easy
17 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Where is the accessory gearbox vented to?

  • Engine breather (correct)
  • Oil tank
  • RGB
  • Filter inlet

Which component receives gravity-fed oil from the oil tank?

  • Accessory gearbox
  • RGB (correct)
  • Filter
  • Engine breather

What is the purpose of the check valve in the RGB oil system?

  • Filters the oil before it enters the RGB
  • Controls pump pressure regulation
  • Prevents oil tank draining into RGB when engine is not operating (correct)
  • Increases oil pressure in the RGB

How does the engine breather normally vent to atmosphere?

<p>Through a drain mast (A)</p> Signup and view all the answers

Where is the RGB oil pump and filter assembly mounted?

<p>Rear of RGB assembly (C)</p> Signup and view all the answers

What happens if RGB pump output pressure is adjusted towards decrease?

<p>Decreased lubrication to moving parts (B)</p> Signup and view all the answers

What scavenges oil from the propeller shaft bearings?

<p>Nose scavenge pump (A)</p> Signup and view all the answers

Which pump is mounted inside the reduction gear assembly?

<p>Main scavenge pump (B)</p> Signup and view all the answers

At what pressure does the pressure relief valve in the scavenge system relieve pressure?

<p>250 PSI (A)</p> Signup and view all the answers

Where does the oil combine after passing through magnetic chip detectors?

<p>On the power section oil pump (C)</p> Signup and view all the answers

What component drives the nose scavenge pump?

<p>Propeller shaft splines (C)</p> Signup and view all the answers

What is the function of the system pressure relief valve in the RGB assembly?

<p>To open when oil pressure exceeds 250 PSI and relieve pressure back into the rear case (C)</p> Signup and view all the answers

From where does the oil mist lubricate the accessory drive train in the RGB assembly?

<p>From the main drive gear (D)</p> Signup and view all the answers

Which part divides the RGB into two main sections?

<p>The bearing diaphragm (B)</p> Signup and view all the answers

What are the two pumps used for effective scavenging in the RGB assembly?

<p>Nose pump and main pump (D)</p> Signup and view all the answers

Which direction does the oil from the filter take to reach the planetary gear system and propeller shaft?

<p>Forward to the planetary gear system and propeller shaft (A)</p> Signup and view all the answers

What is a likely cause for increasing RGB oil pressure according to the text?

<p>Debris causing restrictions in oil galleries or outlets (A)</p> Signup and view all the answers

More Like This

GTS Mod 3 Moderate
40 questions

GTS Mod 3 Moderate

EnterprisingMagnolia avatar
EnterprisingMagnolia
GTS Mod 3 Difficult
18 questions

GTS Mod 3 Difficult

EnterprisingMagnolia avatar
EnterprisingMagnolia
Use Quizgecko on...
Browser
Browser