Podcast
Questions and Answers
The power system consists of generation, distribution, and transmission ______.
The power system consists of generation, distribution, and transmission ______.
system
The power system converts energy like coal and diesel into ______ energy.
The power system converts energy like coal and diesel into ______ energy.
electrical
The devices connected to the power system include synchronous generator, motor, transformer, circuit breaker, and ______.
The devices connected to the power system include synchronous generator, motor, transformer, circuit breaker, and ______.
conductor
The three basic types of distribution system designs are Radial, Loop, or ______.
The three basic types of distribution system designs are Radial, Loop, or ______.
The Radial distribution system is commonly used in ______ populated areas.
The Radial distribution system is commonly used in ______ populated areas.
In a generating substation, the fuel is converted into ______ energy.
In a generating substation, the fuel is converted into ______ energy.
A sub-transmission system has a higher voltage level than a ______ system.
A sub-transmission system has a higher voltage level than a ______ system.
A ______ system has a higher voltage level than a distribution system.
A ______ system has a higher voltage level than a distribution system.
The component of an electrical power system connecting all the consumers in an area to the bulk power sources is called a ______ system.
The component of an electrical power system connecting all the consumers in an area to the bulk power sources is called a ______ system.
The bulk power stations are connected to the ______ substations by transmission lines.
The bulk power stations are connected to the ______ substations by transmission lines.
They feed some ______ which are usually situated at convenient points near the load centres.
They feed some ______ which are usually situated at convenient points near the load centres.
The types of control loops that regulate these processes include industrial control systems (ICS) such as supervisory control and data acquisition (SCADA) and ______ control systems (DCS).
The types of control loops that regulate these processes include industrial control systems (ICS) such as supervisory control and data acquisition (SCADA) and ______ control systems (DCS).
The mechanical energy comes from the burning of ______, gas and nuclear fuel, gas turbines, or occasionally the internal combustion engine.
The mechanical energy comes from the burning of ______, gas and nuclear fuel, gas turbines, or occasionally the internal combustion engine.
The ______ transfers the power with very high efficiency from one level to another.
The ______ transfers the power with very high efficiency from one level to another.
The transmission substation carries the ______ lines which transfer the generated electrical energy from generation to the distribution substations.
The transmission substation carries the ______ lines which transfer the generated electrical energy from generation to the distribution substations.
The transmission lines mainly perform the two functions - It transports the energy from generating stations to ______ receiving stations.
The transmission lines mainly perform the two functions - It transports the energy from generating stations to ______ receiving stations.
The portion of the transmission system that connects the high voltage substations through the ______ transformer to the distribution substations is called the sub-transmission system.
The portion of the transmission system that connects the high voltage substations through the ______ transformer to the distribution substations is called the sub-transmission system.
Its ______ from a distribution system in the following manner.
Its ______ from a distribution system in the following manner.
