Understanding Power Supply, Frequency Signals, and Address/Data Bus in Processors
12 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which signal is used by the microprocessor to determine if it should wait for an IDLE state or continue execution?

  • DEN
  • $\overline{TEST}$ (correct)
  • INTA
  • DT/R

What does the MN/$\overline{MX}$ signal indicate when it is high?

  • Interrupt acknowledgement
  • Minimum mode operation (correct)
  • Maximum mode operation
  • Data transmission

Which signal is responsible for enabling the Transreceiver 8286?

  • DT/R
  • DEN (correct)
  • WR
  • M/IO

What is the purpose of the WR signal available at pin 29?

<p>Write data into memory or output device (A)</p> Signup and view all the answers

Which signal indicates that external devices are requesting to access the address/data buses?

<p>HOLD (C)</p> Signup and view all the answers

What is the function of ALE signal available at pin 25?

<p>Generate positive pulse at the start of operations (D)</p> Signup and view all the answers

What is the purpose of the Clock signal in a microprocessor?

<p>Provide timing for processor operations (C)</p> Signup and view all the answers

Where is the BHE (Bus High Enable) signal available and what is its function?

<p>Pin 34, indicates the transfer of data using higher order bytes (B)</p> Signup and view all the answers

When does the Address/data bus AD0-AD15 carry 16-bit data?

<p>During the first clock cycle (B)</p> Signup and view all the answers

What is the function of the RESET signal in a microprocessor?

<p>Terminate the present activity of the processor (B)</p> Signup and view all the answers

Where is the Ready signal available and what does it indicate?

<p>Pin 22, acknowledgement signal from I/O devices that data is ready for transfer (C)</p> Signup and view all the answers

What is the function of the INTR signal in a microprocessor?

<p>Handle interrupt request (A)</p> Signup and view all the answers

More Like This

Power Supply and Electrical Units Quiz
56 questions
Power Supply Basics
8 questions

Power Supply Basics

SincereFrenchHorn avatar
SincereFrenchHorn
Power Supply Unit and Electrical Concepts
30 questions
Power Supply and Indian Railways
8 questions
Use Quizgecko on...
Browser
Browser