Podcast Beta
Questions and Answers
An ohmmeter is used to measure resistance in a circuit.
True
The temperature coefficient is related to measuring voltage.
True
Electrical current can be measured using a meter connection.
True
SI Derived Units are irrelevant to electric circuit analysis.
Signup and view all the answers
Typical electronic components do not include resistors.
Signup and view all the answers
Study Notes
Electronic Components
- Electronic components are used in circuits and devices
SI Derived Units
- The SI derived unit of charge is the Coulomb (C)
- The SI derived unit of current is the Ampere (A)
- The SI derived unit of potential difference is the Volt (V)
- The SI derived unit of energy is the Joule (J)
- The SI derived unit of power is the Watt (W)
Engineering Prefixes
- Commonly used engineering prefixes to make writing large numbers easier
- Examples are mega, kilo, milli, micro, nano
Measuring Voltage
- Voltage is measured in Volts (V), between two points in a circuit.
- Voltage is a measure of potential difference or electromotive force.
- A voltmeter must always be connected in parallel across the circuit.
- Voltage causes current to flow through a circuit.
Measuring Current
- Current is the rate of flow of electrical charge
- Current is measured in Amperes (A)
- An ammeter is used to measure current
- An ammeter is always connected in series with the circuit.
Temperature Coefficient
- Defined as change in resistance per degree Celsius
- Resistance is measured in Ohms (Ω)
Measuring Resistance
- An ohmmeter is used to measure resistance.
- The ohmmeter must be connected in parallel with the circuit.
- The positive lead should be connected to the positive terminal and the negative lead to the negative terminal.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Related Documents
Description
Dive into the essentials of electronic components and their measurements in this quiz. You'll explore SI derived units, voltage measurement techniques, and current flow principles. Perfect for students in engineering or physics classes.