Recent Lessons

Show all results for ""

Transmission Technical Specifications

Choose a study mode

Play Quiz

Study Flashcards

Spaced Repetition

Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Download our mobile app to listen on the go

Get App

Questions and Answers

What is the primary stage oil pressure of the 2-stage oil pump?

1.8 bar (correct)
2.8 bar
0.8 LPM
4.7 bar

What is the purpose of the MPL CVVT system?

To increase oil pressure
To reduce pumping loss by advancing intake valve open/closing
To improve fuel efficiency by delaying intake valve open/closing (correct)
To mechanically fix the camshaft at the middle position

What is the stroke of the VFS (Variable Force Solenoid) in the MPL CVVT system?

0~5mm (correct)
0~10mm
5~10mm
10~15mm

What is the number of Lock Pins in the MPL CVVT system?

1EA (B) Signup and view all the answers

What is the name of the transmission system mentioned in the text?

IVT Transmission (A) Signup and view all the answers

What is the low speed gear ratio in the IVT transmission?

2.68 (C) Signup and view all the answers

What type of clutch is used in the IVT transmission?

Dry Single Clutch (A) Signup and view all the answers

What is the oil volume required for the IVT transmission?

6.7 ℓ (ATF SP-CVT1) (A) Signup and view all the answers

What type of drive system is used in the IVT transmission?

FF (B) Signup and view all the answers

What is the top speed gear ratio in the IVT transmission?

0.385 (B) Signup and view all the answers

When replacing a transmission, what is the recommended procedure?

Use the KDS to input the hydraulic data (bar code) (A) Signup and view all the answers

What is the temperature range for the Water Temperature Sensor (WTS) in the ECTS Specification?

-40℃ to 100℃ (B) Signup and view all the answers

What is the function of the Integrated Thermal-management Module (ITM)?

To manage the cooling system (C) Signup and view all the answers

What is the purpose of the Internal Rotary Valve in the ITM structure?

To control the flow rate (D) Signup and view all the answers

What is the function of the Heater in the ITM cooling system?

To heat the engine (B) Signup and view all the answers

What is the purpose of the ATF Warmer in the ITM cooling system?

To warm up the ATF (B) Signup and view all the answers

What is the function of the Engine Coolant Filling Mode in the ITM?

To fill the engine coolant (C) Signup and view all the answers

Flashcards are hidden until you start studying