Traffic Rules and Regulations

<p>It promotes socially responsible driving practices. (A)</p> Signup and view all the answers

<p>It sometimes increases air pollution unintentionally. (B)</p> Signup and view all the answers

<p>120 km/hour (A)</p> Signup and view all the answers

<p>Making a U-turn (A)</p> Signup and view all the answers

<p>When the driver is traveling below traffic speed (C)</p> Signup and view all the answers

<p>0.4 grams/liter (C)</p> Signup and view all the answers

<p>Refrain from crossing the green light if it would obstruct traffic (B)</p> Signup and view all the answers

<p>Three months (A)</p> Signup and view all the answers

<p>You can cross the line (D)</p> Signup and view all the answers

<p>Blue or yellow (D)</p> Signup and view all the answers

<p>30 meters (C)</p> Signup and view all the answers

<p>150 meters (C)</p> Signup and view all the answers

<p>The driver should stop and take care of the victim (C)</p> Signup and view all the answers

<p>All of the above (D)</p> Signup and view all the answers

<p>4 years from manufacturing date or 1.6 mm thread thickness, whichever comes first (B)</p> Signup and view all the answers

<p>Traveling on the right side of the road (B)</p> Signup and view all the answers

<p>40 meters per second (A)</p> Signup and view all the answers

<p>0 grams/liter (D)</p> Signup and view all the answers

<p>They reduce friction to improve efficiency. (C)</p> Signup and view all the answers

<p>At least once a month to maintain low rolling resistance. (A)</p> Signup and view all the answers

<p>Improved engine performance by 6 to 11%. (A)</p> Signup and view all the answers

<p>Turn it off to save fuel. (A)</p> Signup and view all the answers

<p>Using clean fuel that meets international standards. (D)</p> Signup and view all the answers

<p>Fuel tank cap is securely closed. (B)</p> Signup and view all the answers

<p>It protects the interior from sun damage. (C)</p> Signup and view all the answers

<p>Always ensure it is properly secured. (C)</p> Signup and view all the answers

<p>Always expect obstacles behind the peak (B)</p> Signup and view all the answers

<p>Using an appropriate low gear (B)</p> Signup and view all the answers

<p>Wait until a safer opportunity (B)</p> Signup and view all the answers

<p>Increasing speed at the turn (D)</p> Signup and view all the answers

<p>Attaching luminous stripes to their motorcycle (B)</p> Signup and view all the answers

<p>Impair decision-making and reaction times (B)</p> Signup and view all the answers

<p>To ensure effective braking performance (D)</p> Signup and view all the answers

<p>3 millimeters (D)</p> Signup and view all the answers

<p>Check surroundings physically and use all available aids (D)</p> Signup and view all the answers

<p>Slowly maintaining a longer stopping distance (C)</p> Signup and view all the answers

<p>Increases the risk of head injuries (D)</p> Signup and view all the answers

<p>Ensure the vehicle complies with height restrictions (A)</p> Signup and view all the answers

<p>Use both front and back brakes (C)</p> Signup and view all the answers

<p>Possible vehicle damage due to rough terrain (C)</p> Signup and view all the answers

<p>Vehicles can go left (B)</p> Signup and view all the answers

<p>The first bend is to the left, followed by another bend (A)</p> Signup and view all the answers

<p>Prepare to navigate a curve to the right (B)</p> Signup and view all the answers

<p>Slow down and be prepared to yield to oncoming traffic (C)</p> Signup and view all the answers

<p>No vehicles can enter this road under any circumstances (A)</p> Signup and view all the answers

<p>Animals could potentially cross the road unexpectedly (C)</p> Signup and view all the answers

<p>Drivers should yield to vehicles coming from other directions (B)</p> Signup and view all the answers

<p>Prepare to yield and not proceed (C)</p> Signup and view all the answers

<p>Continue straight and do not attempt a turn (C)</p> Signup and view all the answers

<p>Not change lanes (B)</p> Signup and view all the answers

<p>Proceed without hesitation (B)</p> Signup and view all the answers

<p>Trucks must follow a specific direction (C)</p> Signup and view all the answers

<p>The previous speed limit is no longer enforceable (D)</p> Signup and view all the answers

<p>Reduce speed and carry on cautiously (D)</p> Signup and view all the answers

<p>Proceed with caution and reduce speed (D)</p> Signup and view all the answers

<p>Ensure not to disaccommodate other drivers (A)</p> Signup and view all the answers

<p>In case of danger (B)</p> Signup and view all the answers

<p>Keep to the right (A)</p> Signup and view all the answers

<p>To maintain speed without checking (A)</p> Signup and view all the answers

<p>Place warning triangle and activate all lights (A)</p> Signup and view all the answers

<p>No circumstances (B)</p> Signup and view all the answers

<p>Move to the right lane (C)</p> Signup and view all the answers

<p>Time to react to emergencies (D)</p> Signup and view all the answers

<p>Tilt slightly to the right but remain on the road (D)</p> Signup and view all the answers

<p>Ease off the accelerator to slow down (C)</p> Signup and view all the answers

Driving practices that aim to reduce fuel consumption and air pollution.

Frequent use of air conditioning can increase fuel consumption by 0.1 to 0.3.

Traveling with fewer passengers and less luggage reduces weight, leading to better fuel efficiency.

Driving at a constant speed reduces fuel consumption compared to driving at random speeds.

Driving during peak hours often leads to more traffic and stops, increasing fuel consumption.

Energy-conserving oil designed to reduce friction and enhance fuel efficiency.

Regularly checking tire pressure helps maintain optimal inflation and lowers rolling resistance, improving fuel economy and tire lifespan.

Cleaning air filters allows optimal airflow, improving engine performance by up to 11% and reducing harmful emissions.

When your car stops for more than a minute, turn off the engine to conserve fuel and reduce emissions.

Using clean fuel that meets international standards enhances engine performance and minimizes harmful emissions.

Always check that the fuel tank cap is securely closed after filling up to prevent fuel leaks and ensure accurate fuel gauge readings.

Parking your car in the shade helps prevent the interior from overheating, protecting the dashboard, upholstery, and reducing the need for excessive air conditioning.

When driving a large vehicle, it's essential to be aware of its height, particularly when navigating under bridges, through tunnels, or on elevated roadways.

Heavy vehicle drivers must be especially cautious regarding their vehicle's width, especially when maneuvering on highways, overtaking other vehicles, or taking breaks, to prevent collisions or roadblocks.

Due to the size and weight of heavy vehicles, reversing in congested areas poses a significant safety risk, particularly during movement or near intersections.

To avoid the rear left wheels of a heavy vehicle crossing the centerline, maneuvering to the extreme left lane during left turns is recommended.

To prevent the rear right wheels of a heavy vehicle from skidding off the road, drivers should stay in the middle of the lane and approach right turns carefully.

When approaching a hilltop, drivers should always assume the presence of potential obstacles on the other side, due to limited visibility.

While driving a heavy vehicle downhill, maintaining control requires utilizing appropriate low gears, as the vehicle's weight can lead to excessive speed.

Continuously using the main brakes of a large vehicle on a long downward slope can lead to brake failure caused by excessive heat build-up.

Failure to shift to a low gear during downhill driving can result in difficulty regaining control and maintaining vehicle safety.

When driving a heavy vehicle uphill for extended periods, it's essential to avoid excessive engine pressure build-up, which can hinder performance and increase fuel consumption.

While driving uphill with a heavy vehicle, it's crucial to monitor the fuel gauge due to increased fuel requirements for climbing.

Overtaking uphill with a heavy vehicle can take considerable time, so drivers should prioritize safety by avoiding unnecessary attempts and focusing on maintaining a safe distance.

Drivers of heavy vehicles should plan carefully when driving off-road, considering terrain, vehicle dimensions, and potential hazards.

Eye contact with other drivers at intersections can help improve communication and prevent misunderstandings, fostering a safer driving environment.

Drivers should prioritize avoiding reversing whenever possible as it dramatically increases the risk of accidents, especially in busy areas.

Ice forms quickly on roads that have an uneven surface, lots of bends, and shaded areas.

Drivers are prohibited from traveling in the designated direction.

A driver must check there is no danger before overtaking another vehicle.

Drivers should not go faster than the speed limit indicated for that specific road.

You cannot overtake another vehicle on a yellow light.

Drivers are prohibited from repairing their vehicles on the freeway, except in extreme situations.

Drivers should keep to the extreme right when traveling below the traffic speed, overtaking, or when they have good visibility ahead.

Drivers with more than three years of driving experience cannot exceed a blood alcohol level of 0.3 grams per liter.

Drivers with less than three years of experience cannot exceed a blood alcohol level of 0 grams per liter.

Drivers are prohibited from using mobile devices for calls or texting while driving.

The speed limit on a freeway with no signs is 120 kilometers per hour.

The speed limit outside populated areas with no signs is 60 kilometers per hour.

The speed limit inside populated areas with no signs is 50 kilometers per hour.

You cannot reverse on the freeway at all.

Pedestrians should use pavements and designated crossings at a distance of at least 130 meters from the roads.

The driver may change lanes only if the solid line is to the left. It signifies that the driver's lane is continuous, allowing for safe lane changes.

Sudden braking is only allowed in situations where the driver needs to stop immediately due to danger, or to check the brakes. Avoid unnecessary braking.

Drivers must stay to the right side of the road when there is another vehicle approaching from the opposite direction, allowing for a safe and clear path for both vehicles.

Overtaking from the right is generally prohibited. However, it is allowed on roads with multiple lanes if the driver moving between lanes does not put other road users at risk.

Overtaking is prohibited on single-lane roads, bridges, tunnels, and when vehicles have stopped due to a traffic obstruction, as these conditions present increased hazards and limited visibility.

If you see a police car, ambulance, or fire truck approaching with a signal, immediately move aside or stop to let them pass while ensuring you are safe and not causing any obstruction.

When approaching an intersection, always check that the road is clear before proceeding. Avoid misjudging the path and causing accidents.

When leaving a road to enter another road on the right, stay to the right side of the road to ensure a safe and smooth turn. Avoid cutting across lanes unexpectedly.

When leaving a road to enter another road on the left, slightly tilt to the right to maintain control during the turn. Avoid sudden movements.

When leaving one road to enter another, make the turn at a moderate speed, ensuring that you have checked for safe passage and not putting others at risk. Avoid abrupt turns.

Maintaining a safe distance from surrounding vehicles provides time to react in case of emergencies, improves visibility, and prevents distractions. This also allows for smooth entry into lanes by other vehicles.

A solid green light at the intersection means you can proceed, but it's crucial to stop, check traffic in all directions, and ensure the way is clear before crossing. Don't solely rely on the light!

A flashing yellow light means proceed with caution! Reduce speed, be prepared for potential hazards, and only proceed if it is safe. Drive cautiously.

A yellow light at the intersection means slow down and be ready to stop. Be prepared for potential hazards as the light may change to red.

In case of a flat tire while driving, release the accelerator, keep the steering wheel straight, and pull off the road safely. Do not brake hard! Apply the brakes gently to slow down.

A sign indicating the road ahead is uneven and motorists should proceed with caution.

A sign indicating the road ahead is slippery and motorists should proceed with caution.

A sign indicating the road ahead has speed bumps and motorists should proceed with caution.

A sign indicating a roundabout is ahead.

A sign indicating a left bend is ahead and motorists should proceed with caution.

A sign indicating a right bend is ahead and motorists should proceed with caution.

A sign indicating a road with two lanes, one for each direction. It is most commonly used in areas with a lot of traffic to reduce the number of accidents caused by merging.

A sign indicating a curve in the road and motorists should proceed with caution.

A sign indicating a narrow road ahead and motorists should proceed with caution.

A sign indicating there is a dangerous slope ahead and motorists should proceed with caution.

A sign indicating the crossing ahead is not secured and motorists should proceed with caution.

A sign indicating that entry is forbidden, commonly found at the end of dead end roads.

A sign indicating that vehicles must travel on the right side of the road.

A sign indicating that vehicles coming from the opposite direction have the right of way and motorists should proceed with caution.

A sign indicating that the road has priority over all other roads that intersect with it.