Tool Safety Guidelines Quiz

To avoid injury

The workstation should be designed so the tool can be put down or rested in a holster when not in use.

Close to the body, close to the handles, and in line with the center of the hand holding the tool.

<p>High torque requires a lot of force to keep the tool from rotating out of your hand.</p> Signup and view all the answers

<p>To prevent the need for continuous holding which can lead to fatigue and injury.</p> Signup and view all the answers

<p>Additional force is required to use the unbalanced tool.</p> Signup and view all the answers

<p>Tilt the work surface instead of the wrist</p> Signup and view all the answers

<p>Rest one foot on a sturdy object above floor height and switch legs periodically</p> Signup and view all the answers

<p>So the chair offers good back support</p> Signup and view all the answers

<p>To comfortably support the natural curve of the lower back</p> Signup and view all the answers

<p>To maintain proper posture and reduce pressure on the lower back</p> Signup and view all the answers

<p>To act accordingly and avoid accidents</p> Signup and view all the answers

<p>Between 1.25 and 1.75 inches</p> Signup and view all the answers

<p>They may not fit the hand size of every user.</p> Signup and view all the answers

<p>About 4 inches</p> Signup and view all the answers

<p>They save muscular effort and reduce mechanical stress on fingers.</p> Signup and view all the answers

<p>On a vertical surface or on a horizontal surface below waist height.</p> Signup and view all the answers

<p>Bending over your work.</p> Signup and view all the answers