4AE3 U3 C1 Formative assessment QUIZCECKO
29 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which industry sector uses steam for both sterilization and refrigeration?

  • Vehicle manufacturing
  • Thermal electric power generation
  • Food and beverage processing (correct)
  • Steel industry
  • Which of the following is NOT a fuel that can be used in a steam boiler?

  • Natural gas
  • Fuel oil
  • Hydrogen (correct)
  • Wood
  • Which of the following is not true about the steam cycle?

  • The steam trap prevents steam from passing through
  • Condensate is pure and still contains heat
  • Steam is vapourized water
  • The cycle repeats when the water condenses back to steam (correct)
  • Which fluid is commonly used as a heat transfer fluid in industrial processes?

    <p>Water</p> Signup and view all the answers

    What happens to the volume of water when it is converted to steam?

    <p>It increases significantly</p> Signup and view all the answers

    What is the primary duty of Power Engineers in relation to steam?

    <p>To produce steam</p> Signup and view all the answers

    Which part of the steam cycle does Figure 3 represent?

    <p>Boiler</p> Signup and view all the answers

    What happens to the steam if it does not spend enough time in the heat exchanger?

    <p>It flows directly to the condensate tank</p> Signup and view all the answers

    What is the main difference between most process steam systems and the steam cycle in a power plant?

    <p>All of the above</p> Signup and view all the answers

    Which of the following is a requirement for successful completion of a learning program in Power Engineering?

    <p>Completing all assignments and passing a final examination</p> Signup and view all the answers

    What is the purpose of the preliminary investigation conducted by the Chief Inspector in the case of a complaint against a Power Engineering certificate holder?

    <p>To determine if further investigation is justified</p> Signup and view all the answers

    Who has the authority to act on behalf of the Minister in the administration of the Act?

    <p>Director, administrator, or safety codes officer</p> Signup and view all the answers

    What can the inspector order in cases of noncompliance?

    <p>Stop work or operations</p> Signup and view all the answers

    What can happen if a person does not comply with an improvement order?

    <p>They may be fined or imprisoned</p> Signup and view all the answers

    What does the Act allow the governing body of the jurisdiction to make regulations about?

    <p>Registration of design, construction, testing, installation, inspection, operation, and repair of boilers, pressure vessels, power plants, and fittings</p> Signup and view all the answers

    What is the purpose of the certificate issued upon successful completion of a Power Engineering course?

    <p>It is not a Power Engineer’s Certificate of Competency</p> Signup and view all the answers

    Who can appeal a suspension or cancellation of a certificate of competency?

    <p>The person whose certificate was suspended or cancelled</p> Signup and view all the answers

    What is the primary duty of Power Engineers in relation to steam?

    <p>To ensure the safe and efficient generation and use of steam</p> Signup and view all the answers

    Who has the power and duty to conduct inspections, issue orders, and enter premises to conduct activities related to Power Engineering?

    <p>Inspectors</p> Signup and view all the answers

    Which act deals with generalities and permits the enforcement of regulations governing Power Engineers and Pressure Welders?

    <p>Acts</p> Signup and view all the answers

    Where can the requirements for Pressure Welders be found in Alberta?

    <p>Pressure Welders Regulation</p> Signup and view all the answers

    What purpose do definitions serve in the Regulations?

    <p>List and define terms used in the Regulations</p> Signup and view all the answers

    Which of the following is a responsibility of the Chief Inspector or designate in relation to equipment design?

    <p>Review and approve the manufacturer's design drawings and calculations</p> Signup and view all the answers

    What do the regulations stipulate fees for?

    <p>Registering boiler, pressure vessel, pressure piping, or fitting designs</p> Signup and view all the answers

    What is the primary purpose of the Power Engineering certificates?

    <p>To ensure the safety and competency of Power Engineers</p> Signup and view all the answers

    Which of the following is NOT a topic covered in the section on Application for Examinations?

    <p>Procedure for submitting exam applications</p> Signup and view all the answers

    What is the penalty for candidates who do not observe the restrictions on code books and calculators during exams?

    <p>They may be disqualified from the exam</p> Signup and view all the answers

    What is the purpose of the welder performance qualification test?

    <p>To evaluate the candidate's practical welding skills</p> Signup and view all the answers

    What is the requirement for pressure welders regarding the identification of their weldments?

    <p>They must use a unique symbol</p> Signup and view all the answers

    More Like This

    4AE3 U3 C1 Obj1
    45 questions
    4AE3 U3 C1 Obj 2
    60 questions
    4AE3 U3 C1 Obj 3
    30 questions
    Use Quizgecko on...
    Browser
    Browser