40 Questions
What is the maximum lifting capacity of the Terex/Atlas 600.M1 crane?
15.5t (fully retracted & above 36°)
What is the rope diameter of the Terex/Atlas 600.M1 crane?
14mm
What is the maximum reach of the Terex/Atlas 600.M1 crane when fully lowered?
9.7m
What is the rope capacity of the ROTZLER HZ010 Auxiliary Winch?
0.8t top layer (8 kN) – 1.2t bottom layer (10.20 KN)
What is the maximum layout of the ROTZLER TR080 Self Recovery Winch?
1:1 Simple Direct
What is the minimum number of coils required on the drum of the Terex/Atlas 600.M1 crane?
3
If the load moment of the Terex/Atlas 600.M1 crane is reduced by 70% when lifting over the cab, what is the maximum lift capacity in this configuration?
4.65t
What is the breaking strain of the rope on the ROTZLER HZ010 Auxiliary Winch?
2.6t
What is the maximum reach in meters of the Terex/Atlas 600.M1 crane at its maximum elevation of 60 degrees?
5m
What is the rope working length of the ROTZLER TR080 Self Recovery Winch?
70m
If the Terex/Atlas 600.M1 crane is lifting a load of 10 tons at a radius of 7 meters and an elevation of 45 degrees, what is the approximate load moment on the crane?
$80 \text{ kNm}$
If the Rotzler HZ010 Auxiliary Winch is being used in a 2:1 indirect layout, what is the maximum line pull that can be achieved?
$3.2 \text{ tons}$
If the Terex/Atlas 600.M1 crane is lifting a load of 8 tons at a radius of 5 meters and an elevation of 30 degrees, and the load moment is reduced by 70% when lifting over the cab, what is the maximum lift capacity in this configuration?
$7.2 \text{ tons}$
If the Rotzler TR080 Self Recovery Winch is being used to pull a load of 8 tons up a 30-degree incline, what is the approximate line pull required?
$7.0 \text{ tons}$
If the Terex/Atlas 600.M1 crane is lifting a load of 12 tons at a radius of 8 meters and an elevation of 50 degrees, and the rope on the crane has a diameter of 14 mm, what is the approximate factor of safety on the rope?
3.5
What is the rope speed of the ROTZLER TR080 Self Recovery Winch?
6m per min
What is the maximum lifting capacity of the ROTZLER HZ010 Auxiliary Winch in a 1:1 direct layout?
2t
What is the maximum elevation angle for lifting with the Terex/Atlas 600.M1 crane?
60°
What is the breaking strain of the rope on the ROTZLER TR080 Self Recovery Winch?
16t
How many kN is the top layer rope capacity of the ROTZLER HZ010 Auxiliary Winch in a 2:1 indirect layout?
8 kN
What is the maximum reach of the Terex/Atlas 600.M1 crane when fully lowered and the load is 3.6 tons?
10.5 meters
If the Rotzler HZ010 Auxiliary Winch is using a 6mm diameter rope, what is the total length of the rope capacity for a 1:1 direct layout?
235 meters
When using the Rotzler TR080 Self Recovery Winch with a 16mm rope, what is the maximum winch speed?
9 meters per minute
What is the minimum number of coils required on the drum of the Terex/Atlas 600.M1 crane to ensure proper operation?
4 coils
If lifting over the cab with the Terex/Atlas 600.M1 crane reduces the load moment by 70%, what is the maximum elevation angle that can be achieved?
60 degrees
What is the total length of the rope on the Rotzler TR080 Self Recovery Winch?
90m
What is the maximum line pull that can be achieved with the Rotzler HZ010 Auxiliary Winch in a 1:1 direct layout?
0.8t
What is the maximum elevation angle for lifting with the Rotzler TR080 Self Recovery Winch?
60°
How many kN is the top layer rope capacity of the Rotzler TR080 Self Recovery Winch in a 1:1 direct layout?
10.20 kN
What is the rope capacity of the Terex/Atlas 600.M1 crane?
15.5t
What is the maximum lift capacity of the Terex/Atlas 600.M1 crane when lifting over the cab?
10.7 tons
What is the maximum winch speed of the ROTZLER TR080 Self Recovery Winch when using a 16mm rope?
9 m/min
What is the maximum layout configuration for the ROTZLER HZ010 Auxiliary Winch?
2:1 indirect
What is the rope capacity of the ROTZLER TR080 Self Recovery Winch in a 1:1 direct layout?
10 tons
What is the approximate factor of safety on the rope of the Terex/Atlas 600.M1 crane when lifting a 12-ton load at a radius of 8 meters and an elevation of 50 degrees?
2.5
What is the maximum reach of the Terex/Atlas 600.M1 crane when fully lowered and the load is 3.6 tons?
9.7 meters
What is the maximum layout configuration for the ROTZLER HZ010 Auxiliary Winch?
2:1 indirect
If the load moment of the Terex/Atlas 600.M1 crane is reduced by 70% when lifting over the cab, what is the maximum lift capacity in this configuration?
10.7 tons
What is the maximum winch speed of the ROTZLER TR080 Self Recovery Winch when using a 16mm rope?
9 m/min
What is the maximum elevation angle for lifting with the Terex/Atlas 600.M1 crane?
60 degrees
Study Notes
Crane Terex/Atlas 600.2 M1
- Make: Terex/Atlas 600.M1
- Max lifting capacity: 15.5t (fully retracted & above 36°)
- Max reach fully lowered: 9.7m
- Max lift: 3.6t
- Rope diameter: 14mm
- Rope working length: 40m
- Minimum coils on drum: 3
- Max reach/Max elevation/Max lift: 5m/60°/10.7t
- Lifting over cab: Load moment is reduced by 70%
- Slewing range: 360° continuously (lifts can only be carried out within the specified parameters of the slew)
Rotzler HZ010 Auxiliary Winch
- Rope total length: 250m
- Rope working length: 235m
- Rope size: 6mm
- Rope capacity: 0.8t (top layer: 8 kN, bottom layer: 10.20 KN)
- Breaking strain: 2.6t
- Max layout: 2:1 indirect
Rotzler TR080 Self Recovery Winch
- Rope total length: 90m
- Rope working length: 70m
- Rope size: 16mm
- Rope capacity: 10t (80kn)
- Breaking strain: 22t
- Maximum layout: 1:1 Simple Direct
- Winch speed: 9m per min (low only)
Test your knowledge on the specifications of the Terex/Atlas 600.2 M1 crane, including max lifting capacity, reach, rope details, lifting capabilities, load moment, and more.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
