18 Questions
What is the target of monitoring the improvement of vehicle performance according to the text?
Monitor the improvement of vehicle performance using performance equations and Simulink models.
What is shown in Fig (9.4) of the text?
The Simulink model.
What does Fig (9.1) in the text depict?
RPM and torque against time.
In the context of the text, what do the performance curves in Fig (9.5) represent?
Performance curves using MATLAB scripts.
What is the Lab time simulation location mentioned in the text?
Spa_Francorchamps track.
What is the dynamic factor mentioned in the text?
1.5.
What was the steering ratio for EVER 05 after modifications?
1.7
What was the minimum turning radius at 90° of the steering wheel for EVER 05?
3.4 m
What was the deformation in the steering arm FEA analysis after modifications?
0.235 mm
What was the FOS (Factor of Safety) for the steering arm FEA of EVER 05?
78%
What was the material used for the steering arm in the FEA analysis of EVER 05?
Steel Alloy
What was the suspension type for the vehicle's front and rear in the modified suspension specifications?
Unequal length double wishbone
What safety feature is included in the car to enable the driver to shut down the vehicle easily in case of emergency?
Internal emergency switch
Which software is used for Lap Time Simulation?
MATLAB
What does Fig(8.1) illustrate in terms of vehicle motion?
Camber change during heave motion
Which software tool is used for modeling the Steering System Assembly?
SOLIDWORKS Visualize
What type of analysis is conducted on the Body Panels using ANSYS?
Stress analysis
What type of motion does Fig(8.4) demonstrate in relation to camber change?
Camber change during roll motion
Test your knowledge on suspension specifications with this quiz based on Table (8.2) detailing roll rates, frequencies, spring stiffness, damping coefficients, and stress analysis.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
