Struck-By Hazards in Construction Safety

Questions and Answers

What type of injuries are produced by forcible contact or impact?

Chemical burns

Slip and fall injuries

Electrical injuries

Struck by injuries (correct)

What may happen as a load is mechanically lifted?

The materials may strike workers if the load swings (correct)

Workers are not allowed near lifting operations

Workers will be completely safe from injury

The load will always remain stable

What should workers wear to protect themselves in construction zones?

High-visibility reflective clothing

How can a struck-by hazard be described?

Anytime a worker is hit by a falling, swinging, flying, or rolling object Signup and view all the answers

To protect yourself from hazardous moving parts of power tools and equipment, always use a/n __________.

safety guard Signup and view all the answers

Wear a/n __________ if required, to avoid being thrown from a vehicle and then crushed by the vehicle.

seatbelt Signup and view all the answers

What should be ensured about loads carried by equipment?

They are stable and secured Signup and view all the answers

Never place yourself between moving materials and a/n __________.

immovable structure, vehicle, or stacked materials Signup and view all the answers

What is a competent person capable of in the work environment?

Identifying hazards and taking corrective measures Signup and view all the answers

What are the focus four hazards?

Falls, Electrocution, Struck-by, Caught between Signup and view all the answers

Study Notes

Struck-By Hazards in Construction

Struck-by injuries occur due to forceful contact or impact with objects or equipment.
Loads being lifted can pose risks if they swing, twist, or turn, potentially striking workers below.
High-visibility reflective clothing enhances worker safety in construction zones.

Identifying Struck-By Hazards

Workers may be at risk from falling, swinging, flying, or rolling objects classified as struck-by hazards.
To avoid injuries from moving parts of power tools, using safety guards is essential for protection.

Safety Precautions

Seatbelts should be worn when in vehicles to protect against being thrown out during an accident or vehicle tip-over.
It is crucial to ensure that loads carried by equipment are stable and secured to prevent accidents.
Workers should never position themselves between moving materials and immovable structures, vehicles, or stacked materials to avoid impact.

Competent Person and Safety Measures

A competent person in the workplace can identify hazards and is authorized to implement corrective measures to enhance safety.

Focus Four Hazards

Focus on four main safety hazards in construction: Falls, Electrocution, Struck-By incidents, and Caught-Between situations.

Description

This quiz focuses on identifying struck-by hazards in construction environments. Participants will learn about the risks posed by falling and moving objects, as well as safety measures to prevent injuries. Key precautions, such as proper use of reflective clothing and securing loads, will also be highlighted.