5 Questions
After putting the controller in manual and zeroing the pressure gauge, what should be done next?
Simultaneously close the supply valve and open bypass
What is the first step in stroking the adjustable port valves?
Communicate the plan
What should be done after adjusting the arms to be parallel and correspond to the correct valve position?
Open the supply valve and close the bypass
Which step involves making sure the arms align with the correct valve position?
Adjust the arms to be parallel and correspond to the correct valve position
What is the final step in stroking the adjustable port valves?
If needed, adjust curtain skirt and linkage appropriately
Study Notes
Stroking the Adjustable Port Valves
- Communicate the plan before starting the process
- Set the controller to manual mode and reset the pressure gauge to zero
- Close the supply valve and open the bypass valve simultaneously to prepare the system
- Adjust the arms to be parallel and align with the correct valve position for proper configuration
- Open the supply valve and close the bypass valve to initiate the stroking process
- Verify the pressure level after the stroking process is complete
- Make any necessary adjustments to the curtain skirt and linkage for optimal performance
This quiz covers the steps to stroke air adjustable port valves, including communicating the plan, adjusting the arms, and verifying the pressure. It is essential for professionals working with pneumatic systems.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
