Steel Sections Selection based on Cost and Plastic Modulus
4 Questions
0 Views

Steel Sections Selection based on Cost and Plastic Modulus

Created by
@IntricateHarpsichord

Podcast Beta

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the primary factor that should be considered when selecting a steel section?

  • The depth of the steel section
  • The weight of the steel section
  • The cost per pound of the steel section
  • The plastic modulus of the steel section (correct)
  • How are the steel sections arranged in the table?

  • In random order
  • In groups based on plastic modulus ranges (correct)
  • In order of increasing plastic modulus
  • In order of decreasing weight
  • What is the general principle for selecting the steel section?

  • Select the section with the highest plastic modulus
  • Select the section with the lowest cost per pound
  • Select the section with the lowest weight (correct)
  • Select the section with the greatest depth
  • When would a shallower but heavier section be selected instead of a deeper section?

    <p>When the deeper section causes a problem in obtaining the desired headroom</p> Signup and view all the answers

    More Like This

    Use Quizgecko on...
    Browser
    Browser