Steam Plant Operation and Refrigeration System Quiz
10 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What should be the proper response of the watch engineer after finding the refrigeration compressor has blown the shaft seal?

  • Secure the compressor at once and close the suction and discharge valves
  • Pump the system down and isolate the leak
  • Tighten the shaft seal packing to reduce leakage, slow the compressor, and operate the expansion valves by hand until repairs can be made
  • Close the suction valve, secure the compressor, and then replace the shaft seal (correct)

How should an oxygen and acetylene cylinders be properly stored?

  • Horizontal with the cylinder caps off
  • Upright with the cylinder caps off
  • Upright with the cylinder caps screwed on
  • Horizontal with the cylinder caps screwed on (correct)

Why is live auxiliary steam normally attemporated before entering the feed heater of a flash evaporator?

  • To avoid thermal shock to the equipment (correct)
  • To prevent steam leaks from occurring
  • To increase the efficiency of the flash evaporator
  • To reduce the pressure inside the feed heater

What is the cause of injection lag in a diesel engine?

<p>A higher cetane number of fuel oil (A)</p> Signup and view all the answers

Which of the following operating conditions listed should be given priority attention by the watch engineer according to the text?

<p>Low water level in the main boiler (A)</p> Signup and view all the answers

What is the purpose of a lube oil filter in a diesel engine?

<p>Remove Water (D)</p> Signup and view all the answers

If a watch engineer needs to slow a compressor down due to a blown shaft seal, what action should they take according to the text?

<p>Operate the expansion valves by hand (D)</p> Signup and view all the answers

What governor characteristic is used to maintain frequency in diesel engines driving alternators operating in parallel?

<p>Sensitivity (B)</p> Signup and view all the answers

What fuel oil ignition method is commonly found on automatically fired auxiliary boilers aboard merchant vessels?

<p>An incandescent glow plug (A)</p> Signup and view all the answers

What does a pneumercator measure in a marine context?

<p>Tank fluid level (C)</p> Signup and view all the answers

More Like This

Use Quizgecko on...
Browser
Browser