5 Questions
Match the following terms with their definitions:
Defective = An entire unit that fails to meet specifications Defect = An undesirable condition within a unit Rational subgroup = A collection of units that are all produced under the same conditions In-control = The construction process is operating within established control limits
Match the following terms with their descriptions:
Walter Shewhart = Developed the first control charts in the 1920's Quality gurus = Expanded on early control charts Defective unit = Can have multiple defects associated with it Out-of-control = Indicates that the construction process has deviated significantly
Match the following concepts with their definitions:
Inherent process variation = Normal variation within homogeneous samples Defect = Can make a unit defective In-control = Suggests that the process is stable and predictable Rational subgroup = Should be as homogenous as possible
Match the following terms to their meanings:
Defective = A unit that has a defect on it Defect = Can exist multiple times in a single defective unit Rational subgroup = Variation within these samples should only include the normal, inherent process variation Out-of-control = The process that has deviated significantly
Match these terms to their definitions:
Defective = A unit that does not meet specifications Defect = An undesirable condition in a unit In-control = A process operating within established control limits Rational subgroup = A group of units produced under the same conditions
Study Notes
Matching Terms with Definitions
- The text asks to match various terms with their corresponding descriptions or meanings.
- The phrases "Match the following terms with their definitions", "Match the following terms to their meanings", "Match the following concepts with their definitions", and "Match these terms to their definitions" all convey the same instruction.
- The task requires associating specific terms with their correct definitions or explanations.
Test your knowledge on Statistical Process Control (SPC) and quality management with this quiz. Learn about the difference between defects and defectives, and how they relate to unit specifications. Challenge yourself with questions on the history of SPC and the contributions of quality gurus.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
