Stacking Chairs Height and Placement Quiz
52 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

How high do the stacking chairs in the older product typically go?

  • 11
  • 2 (correct)
  • 5
  • 8

What is the recommended distance if the product is placed near a heat source?

  • 12 inches (correct)
  • 15 inches
  • 24 inches
  • 20 inches

What is the stacking ability of the new stacking chair, Adelfia?

  • 4 (correct)
  • 12
  • 7
  • 9

What could potentially happen if a product is placed too close to a heat source?

<p>The fabric could fade in outdoor settings like patio areas. (C)</p> Signup and view all the answers

What does it mean if a product has UV protection?

<p>It protects against ultraviolet rays, preventing sun damage on outdoor materials. (D)</p> Signup and view all the answers

How is seat width typically measured?

<p>From front to back (B)</p> Signup and view all the answers

Which of the following is not a type of senior living facility?

<p>Dental Home (B)</p> Signup and view all the answers

Can someone who cannot care for themselves live in an Independent Living Facility?

<p>No (D)</p> Signup and view all the answers

When designing products for Memory Care, which element should be the least considered?

<p>Cost-effectiveness (D)</p> Signup and view all the answers

What is the primary benefit of Kwalu furniture in Memory Care environments?

<p>Home-like style (C)</p> Signup and view all the answers

Which of the following is not a key feature of a Motion Chair?

<p>Reclines fully into a bed (B)</p> Signup and view all the answers

What helps residents in Memory Care environments determine the furniture edges and drawer handles?

<p>Contrast Edge (C)</p> Signup and view all the answers

Which color is commonly used for contrasting elements in Memory Care environments?

<p>Grey (D)</p> Signup and view all the answers

Which type of rail arms allow Memory Care residents to easily move in and out of dining chairs?

<p>Sliding (B)</p> Signup and view all the answers

Which color tones are commonly used in Memory Care dining rooms?

<p>Yellow and Orange (A)</p> Signup and view all the answers

What aspect of the Kwalu finish is best suited for rooms with high turnover in Short Term Rehab?

<p>Durability (D)</p> Signup and view all the answers

What does fabric abrasion refer to?

<p>Surface wear caused by rubbing contact (B)</p> Signup and view all the answers

What do flammability tests assess?

<p>How hazardous fabrics are during a fire (C)</p> Signup and view all the answers

Where can fabric wearability codes be found?

<p>On fabric care labels (D)</p> Signup and view all the answers

What does the fabric grade indicate?

<p>Fabric durability (C)</p> Signup and view all the answers

Is fabric strength determined by the double rub test?

<p>True (A)</p> Signup and view all the answers

How many double rubs are equivalent to one year's worth of use?

<p>2,000 (C)</p> Signup and view all the answers

What does 'BH' at the end of a stock code indicate?

<p>The product is designed for behavioral healthcare settings (B)</p> Signup and view all the answers

What element was the Behavioral Healthcare product line designed with in mind?

<p>Safety (D)</p> Signup and view all the answers

What does the stock code 'ADSTK12' indicate about the Adelfia chair?

<p>It has a handgrip (B)</p> Signup and view all the answers

What does the abbreviation 'OB' mean in relation to fabric zones?

<p>Outer Boundary (D)</p> Signup and view all the answers

Which of the following is NOT one of the stages of production mentioned in the text?

<p>Polishing (D)</p> Signup and view all the answers

What two factors are used to mix the pellets and produce the correct mixture?

<p>Temperature and speed (A)</p> Signup and view all the answers

What is the purpose of the vacuum-sealed die during the extrusion process?

<p>To prevent the hollow pipe from collapsing (D)</p> Signup and view all the answers

What are the three methods used to mold and bend the extruded pipe into the correct shape?

<p>Heat, air, and water (A)</p> Signup and view all the answers

What is the purpose of a jig in the production process?

<p>To hold the product in place during assembly (A)</p> Signup and view all the answers

What material is added to the chair during the assembly process to give it its robust shape and eloquent feel?

<p>Foam (D)</p> Signup and view all the answers

Which of the following would be a good guest chair for Short Term Rehab facilities?

<p>Valentia (B)</p> Signup and view all the answers

In Behavioral Healthcare (BH), are tamper-proof screws used on the table tops and bases?

<p>True (A)</p> Signup and view all the answers

Do BH tables come with floor mounting hardware as a standard feature?

<p>True (A)</p> Signup and view all the answers

Are BH dining chairs made with laminate seat bottoms?

<p>False (B)</p> Signup and view all the answers

What is the largest manufactured and sold plastic in the world?

<p>Second (D)</p> Signup and view all the answers

Vinyl is generally fused with which fabrics to reinforce it and add moisture resistance?

<p>Cotton, Polyester (B)</p> Signup and view all the answers

What percentage of vinyl is composed of common salt?

<p>57% (A)</p> Signup and view all the answers

Against which of the following does vinyl NOT offer resistance?

<p>Flammability (B)</p> Signup and view all the answers

What does the test CAL133 evaluate?

<p>Heat generated by furniture combustion (C)</p> Signup and view all the answers

If a fabric passes the CAL117 test, what does it indicate?

<p>The fabric will not ignite (A)</p> Signup and view all the answers

What are the two materials mentioned for adding core and placing casters/glides?

<p>Foam, Pipe (D)</p> Signup and view all the answers

Which department uses high-pressure water to clean the chair?

<p>Wash (D)</p> Signup and view all the answers

What material is placed in the joints to remove any gaps?

<p>Silicon (B)</p> Signup and view all the answers

What is the role of the Trimmer department?

<p>Removes excess foam from joints and plastic from the bottom (C)</p> Signup and view all the answers

True or false? A Quality Control inspector reviews the chair, scans it, and passes it to Upholstery.

<p>True (B)</p> Signup and view all the answers

What type of facility provides meal, laundry, and housekeeping assistance along with medication reminders?

<p>Assisted Living Facility (D)</p> Signup and view all the answers

For a senior not needing help with managing money or meal preparation, which facility would be appropriate?

<p>Independent Living Facility (C)</p> Signup and view all the answers

What type of community offers Independent Living, Assisted Living, Nursing Care, Home Health, and Community Based Services?

<p>Continuing Care Retirement Community (CCRC) (D)</p> Signup and view all the answers

If a senior has dementia, which type of facility would they need?

<p>Memory Care Facility (B)</p> Signup and view all the answers

For seniors needing help with bathing, grooming, eating, dressing, and going to the bathroom, which facility is recommended?

<p>Nursing Home (B)</p> Signup and view all the answers

More Like This

Use Quizgecko on...
Browser
Browser