Semiconductor Resistance Levels Quiz
17 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What defines the average of the ac values from 2 mA to 17 mA?

  • Table 1.6
  • Equation (1.6)
  • Equation (1.7) (correct)
  • Equation (1.8)

If the ac resistance (rd) were determined at ID = 2 mA, what would its value be?

  • More than 5 D (correct)
  • Exactly 5 D
  • Less than 5 D
  • Cannot be determined from the information given

What does the fact that one resistance level can be used for a wide range of characteristics prove?

  • The usefulness of equivalent circuits for a diode (correct)
  • The irrelevance of resistance levels
  • The inconsistency in resistance calculations
  • The complexity of diode circuits

What is the lower level of currents used to determine the average resistance?

<p>$2 mA$ (D)</p> Signup and view all the answers

What does Equation (1.8) determine?

<p>The average ac resistance between indicated limits (B)</p> Signup and view all the answers

What is the value of Lild when ID = 17 mA and ID = 2 mA?

<p>$15 mA$ (D)</p> Signup and view all the answers

What transition does the ac resistance make between 2 mA and 17 mA?

<p>From high to low (D)</p> Signup and view all the answers

What is the purpose of Summary Table Table 1.6?

<p>To emphasize differences among various resistance levels (A)</p> Signup and view all the answers

What is considered the foundation for a number of resistance calculations in later sections and chapters?

<p>$r_{av}$ defined by Equation (1.7) (A)</p> Signup and view all the answers

What does Equation (1.7) define a value for?

<p>Average of ac values from 2mA to 17mA (C)</p> Signup and view all the answers

What is the forward voltage (Vp) of the diode when the forward current (IF) is 200mA?

<p>0.94 V (C)</p> Signup and view all the answers

What is the reverse current (Ir) of the diode when the reverse voltage (VR) is 35V?

<p>0.5 µA (A)</p> Signup and view all the answers

What does the diode's breakdown voltage (BV) indicate?

<p>The voltage at which the diode breaks down and conducts a significant current (A)</p> Signup and view all the answers

What does the term 'reverse recovery time' refer to in relation to a diode?

<p>The time taken for the diode to switch from conducting in the reverse direction to conducting in the forward direction (B)</p> Signup and view all the answers

At what frequency is the reverse recovery time of the diode tested?

<p>1.0MHz (A)</p> Signup and view all the answers

What is the maximum reverse voltage (VR) at which the capacitance (Ct) of the diode is measured?

<p>20V (C)</p> Signup and view all the answers

What test condition is specified for measuring the capacitance (Ct) of the diode?

<p>IF = 10mA, VR = 35V (D)</p> Signup and view all the answers

More Like This

CMOS VLSI Design Chapter 1 Review
5 questions
ICE 2 PART 1
10 questions

ICE 2 PART 1

SensibleFeministArt avatar
SensibleFeministArt
Use Quizgecko on...
Browser
Browser