SD-WAN and AD-VPN Deployment Basics Quiz
20 Questions
2 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which feature is enabled on the spoke1 router?

  • Overlay stickiness
  • Auto-discovery-sender
  • Route reflector
  • Mode-cfg (correct)

    • What is the preferred member on spoke1?

  • T_INET_0 (correct)
  • T_INET_2
  • T_INET_1
  • T_INET_3

    • What is the net-device configuration on the hub?

  • Route reflector enabled
  • Auto-discovery-sender enabled
  • Enabled
  • Disabled (correct)

    • What is the allowaccess configuration on the spokes?

    <p>Ping</p> Signup and view all the answers

    What is the SD-WAN rule ID for traffic steering between spokes?

    <p>1</p> Signup and view all the answers

    What is the overlay configuration on the spokes?

    <p>Members of SD-WAN</p> Signup and view all the answers

    What is the performance SLA configuration on the spokes?

    <p>Configured for spokes</p> Signup and view all the answers

    What is the auto-discovery-receiver configuration on the spokes?

    <p>Enabled</p> Signup and view all the answers

    What is the route reflector configuration on the hub?

    <p>Route reflector enabled</p> Signup and view all the answers

    What is the route resolution for the first IBGP route on spoke1?

    <p>T_INET_0</p> Signup and view all the answers

    Which of the following is true about the routing of traffic between spoke1 and spoke2?

    <p>Traffic is initially routed through the parent overlay T_INET_0 and then through the shortcut T_INET_0_0</p> Signup and view all the answers

    What happens to the next hop of the IBGP routes after the shortcut is established?

    <p>It resolves to the shortcut instead of the parent tunnel</p> Signup and view all the answers

    What does FortiGate do with the shortcut in the SD-WAN rule diagnostic output?

    <p>It lists the shortcut as a subinterface</p> Signup and view all the answers

    What protocol does FortiGate use to monitor the shortcut after it is established?

    <p>Ping</p> Signup and view all the answers

    What can be specified in the IKE log filter to print debug messages for AD-VPN shortcut negotiation?

    <p>Multiple IP-addresses</p> Signup and view all the answers

    What does the hub send to spoke1 to initiate the shortcut negotiation?

    <p>Shortcut offer</p> Signup and view all the answers

    What does spoke1 reply with after receiving the shortcut offer from the hub?

    <p>Shortcut query</p> Signup and view all the answers

    What does spoke2 respond with after receiving the shortcut query from the hub?

    <p>Shortcut reply</p> Signup and view all the answers

    What does spoke1 do after receiving the shortcut reply from the hub?

    <p>It initiates tunnel negotiation with spoke2</p> Signup and view all the answers

    What is the name of the shortcut negotiated between spoke1 and spoke2?

    <p>T_INET_0_0</p> Signup and view all the answers

    More Like This

    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser