Scratch Animation and Game Design Quiz

<p>Light Blue (A)</p> Signup and view all the answers

<p>'Say [message] for 2 seconds' (B)</p> Signup and view all the answers

<p>'Go to x: [value] y: [value]' (C)</p> Signup and view all the answers

<p>'Forever' (A)</p> Signup and view all the answers

<p>Stops all animations and actions (A)</p> Signup and view all the answers

<p>Sends a message to all scripts (D)</p> Signup and view all the answers

<p>'If touching [object]' (D)</p> Signup and view all the answers

<p>Combines multiple shapes into a single object (C)</p> Signup and view all the answers

<p>To position objects precisely (C)</p> Signup and view all the answers

<p>Hole tool (A)</p> Signup and view all the answers

<p>Cycles to the next costume of the sprite (D)</p> Signup and view all the answers

<p>Edit panel (A)</p> Signup and view all the answers

<p>Pauses execution until a specified condition is satisfied (B)</p> Signup and view all the answers

<p>Looks (D)</p> Signup and view all the answers

<p>Prepares the object for 3D printing (D)</p> Signup and view all the answers

<p>Snap Grid tool (C)</p> Signup and view all the answers

<p>The spacing of object placement (D)</p> Signup and view all the answers

<p>Resets all visual effects applied to a sprite (D)</p> Signup and view all the answers

<p>'Change color effect by [value]' (C)</p> Signup and view all the answers

<p>Wireframe view (B)</p> Signup and view all the answers

<p>'Wait 2 seconds' (D)</p> Signup and view all the answers

<p>Executes the actions inside it a specific number of times (C)</p> Signup and view all the answers

<p>'Stop All' (D)</p> Signup and view all the answers

<p>'Hide' (C)</p> Signup and view all the answers

<p>The enclosed actions run repeatedly until a stop condition is met (B)</p> Signup and view all the answers

<p>'Go to x: [value] y: [value]' (C)</p> Signup and view all the answers

<p>Looks (B)</p> Signup and view all the answers

<p>'Play sound until done' (C)</p> Signup and view all the answers

<p>Group tool (C)</p> Signup and view all the answers

<p>Lift tool (D)</p> Signup and view all the answers

<p>Helps position objects at specific intervals (B)</p> Signup and view all the answers

<p>STL (B)</p> Signup and view all the answers

<p>Click the Home button (C)</p> Signup and view all the answers

<p>Ruler tool (D)</p> Signup and view all the answers

<p>Allows viewing designs from various angles (D)</p> Signup and view all the answers

<p>Autosave function (A)</p> Signup and view all the answers

<p>Hole tool (C)</p> Signup and view all the answers

<p>Save it as a 3D model for printing (A)</p> Signup and view all the answers

<p>'Wait until' (C)</p> Signup and view all the answers

<p>Sends a signal to all scripts (D)</p> Signup and view all the answers

<p>Stores numerical values (B)</p> Signup and view all the answers

<p>Color Palette (D)</p> Signup and view all the answers

<p>'If touching [object]' (A)</p> Signup and view all the answers

<p>To elevate an object to a specific height (D)</p> Signup and view all the answers

<p>Removes any applied visual effects (C)</p> Signup and view all the answers

<p>STL file format (C)</p> Signup and view all the answers

<p>Ruler tool (C)</p> Signup and view all the answers

<p>'Repeat' (D)</p> Signup and view all the answers

<p>The sprite shifts to the next outfit in sequence (B)</p> Signup and view all the answers

<p>Animate (D)</p> Signup and view all the answers

<p>Orbit tool (A)</p> Signup and view all the answers

Scratch is primarily used to create animations and games.

A sprite is an object (character, image) in Scratch that can move, talk, or do actions.

The Green Flag button starts a Scratch project.

The Motion block category contains commands to move sprites (e.g. move 10 steps).

The Repeat block is found in the Control category.

Motion blocks in Scratch are light blue.

The "Say" block makes a character speak.

This block is in the Events category and runs instructions when the Green Flag is pressed.

Changing colors in Scratch is done through the "Looks" section, not "Motion", "Sound", or "Control".

A Scratch variable stores a value, like a container for information.

The block 'If touching [object]' in Scratch checks if a sprite is touching another sprite or object.

The 'broadcast' block sends a message to all scripts in Scratch.

The 'wait until' block pauses a script until a specific condition is met.

The 'When key pressed' block in Scratch is used to detect keyboard input and trigger actions.

The 'next costume' block changes the sprite's appearance to the next costume in the list.

Tinkercad is used primarily for 3D modeling, not coding, video editing or essays.

The workplane in Tinkercad is the area where you create and manipulate 3D designs.

Basic shapes like cubes and cylinders are in the Shape library in Tinkercad.

The ruler tool is used in Tinkercad to position objects precisely.

The Group tool in Tinkercad combines multiple shapes into one object, allowing you to treat them as one unit.

The Align tool in Tinkercad positions objects evenly.

The Mirror tool flips an object in Tinkercad.

The shortcut for duplicating an object in Tinkercad is Ctrl + D.

Scratch is a programming language primarily used to create interactive animations and games.

A 'sprite' is an object (like a character or image) in Scratch that can perform actions, move, and interact.

The Green Flag is a button in Scratch that starts the execution of your project.

The 'move 10 steps' block is in the Motion category, which contains blocks for controlling a sprite's movement.

The 'repeat' block is found within the Control category.

Motion blocks in Scratch are light blue.

The 'Say [message] for 2 seconds' block allows a sprite to display a message bubble with text on the screen.

The 'Forever' block is used to repeat actions continually.

The 'Group' tool in Tinkercad combines multiple shapes into one object, allowing you to treat them as a single unit.

The 'Align' tool in Tinkercad positions objects evenly, helping create symmetrical and organized designs.

The 'Mirror' tool in Tinkercad flips an object, creating a symmetrical reflection.

The shortcut to duplicate an object in Tinkercad is Ctrl + D.

The 'Orbit' tool in Tinkercad allows you to view your design from various angles by spinning it around.

The 'Undo' and 'Redo' buttons are located on the Toolbar in Tinkercad.

To change the color of a shape in Tinkercad, use the 'Color Palette'.

The 'Hole' tool in Tinkercad is used to create holes in shapes, making them hollow or adding details.

The 'Scale' tool in Tinkercad helps you resize an object to the exact size of another object.

The file format commonly used to export Tinkercad designs for 3D printing is STL.

Moving a sprite in Scratch gradually, not in sudden jumps.

Turning a sprite by a specific angle.

Making a sprite larger or smaller.

These blocks change the color of a sprite or the background.

A container to store information that can be used and changed in a program.

Detecting when two sprites or a sprite and an object touch each other.

This sends a message to all the scripts that are listening.

This block pauses a script until a specific condition is true.

Used to detect which key is pressed on the keyboard.

This block allows you to display a sprite on top of all other sprites.

Removes any visual effects (like shadows or glows) applied to a sprite.

Used to create 3D models, often for printing or visualization.

Pre-made shapes like cubes, cylinders, and spheres, ready to use.