🎧 New: AI-Generated Podcasts Turn your study notes into engaging audio conversations. Learn more

Sanitary Piping Layout Principles
12 Questions
0 Views

Sanitary Piping Layout Principles

Created by
@CleanerGladiolus

Podcast Beta

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the purpose of a house/building sewer?

  • To convey the drainage of one building site to the street sewer (correct)
  • To connect the house drain to the foundation wall
  • To extend from the house drain to the junction with the street sewer
  • To convey the drainage from multiple building sites to the street sewer
  • What is the purpose of a sanitary cross fitting?

  • To allow for a vertical to horizontal change in direction
  • To not allow for any change in direction
  • To allow for multiple inlets at the same level (correct)
  • To allow for a horizontal to vertical change in direction
  • What is the purpose of a deep seal P-trap?

  • To allow for a horizontal to vertical change in direction
  • To provide a larger water seal for extreme conditions (correct)
  • To provide structural support for the fixture
  • To be used for fixtures that discharge large amounts of water
  • What is the purpose of a drum trap?

    <p>To be used for fixtures that discharge large amounts of water</p> Signup and view all the answers

    What is the purpose of a running trap?

    <p>To be used within the line of the house drain</p> Signup and view all the answers

    What is the purpose of a stand trap?

    <p>To provide a water seal and structural support for fixtures built low in the ground</p> Signup and view all the answers

    What is the primary function of a vent pipe in a sanitary drainage system?

    <p>To ensure efficient circulation of air and relieve negative pressure</p> Signup and view all the answers

    Which of the following is the correct description of a trap?

    <p>A device that provides a liquid seal to prevent backflow of foul air or methane gas</p> Signup and view all the answers

    What is the purpose of a house/building drain?

    <p>To receive discharges from soil, waste, and other drainage pipes inside the building and convey it to the house sewer outside</p> Signup and view all the answers

    Which of the following is the correct description of a stack?

    <p>The vertical main of a system of soil, waste or vent pipings extending through one or more stories and extended through the roof</p> Signup and view all the answers

    What is the primary function of a waste pipe in a sanitary drainage system?

    <p>To convey wastewater or liquid waste free of fecal matter</p> Signup and view all the answers

    What is the recommended layout for sanitary piping according to the text?

    <p>The pipes should take the shortest possible route to the house sewer or the terminating point of the sanitary system</p> Signup and view all the answers

    More Quizzes Like This

    Sanitary Facilities Requirements Quiz
    3 questions
    Sanitary and Wastewater Engineering
    5 questions
    Sanitary Drainage Systems Quiz
    10 questions
    Understanding Sanitary Pads Quiz
    12 questions
    Use Quizgecko on...
    Browser
    Browser