სამრეწველო შენობის მშენებლობა და მასალები

Industrial Building Architecture

• Question 1: A longitudinal light-span construction does not include: Rafters, Diagonal Braces, Tie Rods, Top Chord.
• Question 2: Which type of stairs is not suitable for an industrial building (factory): General, Standard Stairs, Emergency Stairs, Evacuation Stairs.
• Question 3: Large-span industrial building roofs are not shaped as: Round, Flat, Spatial, Suspended.
• Question 4: Large-span spatial constructions do not include: Shell, Vaulted, Curved, Frame.
• Question 5: The radial layout scheme of industrial facilities in urban planning is represented by: 1- 1; 2 - 8; 3 - 8
• Question 6: The axial layout scheme of industrial facilities in urban planning is represented by: 1-1; 2-3; 3-0
• Question 7: The cross-sectional layout scheme of industrial facilities in urban planning is represented by: 1-6; 2-3; 3-6.
• Question 8: A well-connected cross-frame system does not include: Foundation, Roof Slabs, Braces, Columns.
• Question 9: A well-connected longitudinal structural element does not include: Foundation brace, Beam, Truss, Restricting structures.
• Question 10: Which one is not an advantage of reinforced concrete structures: High Mass, High Fire Resistance, Low Metal Cost, High Moisture Resistance.
• Question 11: Which one is not an advantage of metal structures: High Strength, High Construction Speed, Moisture resistant, Adjustable/Repairable
• Question 12: Which material isn't used for metal frame construction' Foundation Braces, Columns, Roof Truss, Roof Braces
• Question 13: Which material isn't used for metal frame construction: Roof Truss, Foundation Braces, Columns, Roof Braces
• Question 14: In a load-bearing metal roof structure which is not used: Metal Frame, Metal Truss, Metal Beam, Metal Bracing
• Question 15: Which item is not a component of a metal truss: Top and Bottom Chords, Braces, Metal Sheet, Diagonal Braces
• Question 16: Which structural feature is not possible for a metal frame structure; Single span or multiple spans, Horizontal or angled top chords, with truss underneath, one bay or grid-like.
• Question 17: Which transportation method is not used in industrial buildings: Trolley, Train, Hydraulic Lift, Mechanical
• Question 18: Which roof system relies on atmospheric pressure: Unavailable from given data
• Question 19: Which scheme features lighting-transmitting vents: Unavailable from given data
• Question 20: In which layout is there zero connection of the structural elements to the load axis when the load is ≤30t and the column height ≤14.4m: Unavailable from given data
• Question 21: In which scheme is there a connection at ≥15.6 m with a load of ≥30t and a column height: Unavailable from given data
• Question 22: Which layout showcases a tower connection on a cross-beam: No information.
• Question 23: In which scheme are intermediate columns connected to a cross axis during thermal expansion/contraction: Unavailable from given data
• Question 24: Which layout shows the connection of intermediate columns to the cross-axis with a filler: Unavailable from given data
• Question 25: Which scheme shows column termination at longitudinal thermal joints: No information.
• Question 26: In which layout is the column connection to the cross axis during thermal joint: No information
• Question 27: In which scheme are the connections to the longitudinal thermal joint : No information
• Question 28: Which layout showcases a column attachment to the tower wall: Unavailable from given data
• Question 29: In the provided scheme, which one is the foundation-column connection node: No information.
• Question 30: In the given scheme, which one is the column-truss connection node: No information.
• Question 31: In the given scheme, which one is the truss-truss connection node below truss: No information.
• Question 32: In the given scheme, which is the truss-roof slab connection node: No information.
• Question 33: In the provided scheme, which one is the roof slab-wall panel connection node: No information.
• Question 34: In the diagram, which component is the post and beam column: No information
• Question 35: In the diagrams, highlight the metal columns during crane use (or without crane): No information.
• Question 36: In the diagram, which are the two-ended columns under bridge crane use (≤50t): No information.
• Question 37: In the diagram, which are the full section columns for bridge crane use (≤20t): No information.
• Question 38: Noise and vibration in industrial buildings do: reduce worker productivity, change thermal environments, increase occupational accidents, increase the chances of occupational diseases.
• Question 39: For optimal air circulation, factory windows must face the prevailing wind: Parallel to, 45 degrees, Perpendicular to.
• Question 40: Industrial building walls do not fulfill: Maintaining temperature, Maintain stability, Maintain structural integrity, Protect from adverse conditions.
• Question 41: Based on construction, industrial walls are not categorized as: Large panel, Small panel, Monolithic, Hanging.
• Question 42: Industrial walls based on static loads are not: Monolithic, load-bearing, self-supporting, hanging.
• Question 43: Panel components in walls do not include: Boundary panel, Wall panel, Parapet wall, Cornice.
• Question 44: In self-supporting large-block industrial buildings, load is not transferred to: Centered-wall panels, Foundation panels, Foundation supports, Columns.
• Question 45: The water collection area on a roof for a single gutter system is not dependent on: Environmental climate conditions, Waterproof paint, Roof type, Roof slope.
• Question 46: Which material is not suitable for vapor barrier: Thin metal sheet, Roofing felt, Polymeric sheet, Waterproof Paint.
• Question 47: Which material is not used for effective insulation on lightweight metal roofs: Roofing felt, Polystyrene foam, Polyurethane foam, Lightweight polymeric material.
• Question 48: Which material is not used as insulation on a reinforced concrete roof: Vapor barrier, Lightweight concrete, Fibrolite, Mineral wool.
• Question 49: Which component is not supported by a profiled metal roof: Metal beams, Double-C-shaped support, Profile metal support structures, C-shaped metal structures.
• Question 50: What is a disadvantage of multi-story industrial buildings compared to single-story: Installation complexity, Evacuation procedures, Smaller ground area, Load to inter-level roof.
• Question 51: What is a disadvantage of multi-story industrial buildings compared to single-story: Small perimeter structure, Footprint area is smaller, Installation complexity, Evacuation procedures
• Question 52: Which industrial sector does not use multi-story buildings; light industry, electrical machinery, metallurgy, food processing.
• Question 53: In the depicted diagram, which is the node connecting the column and the beam: Unavailable from given data
• Question 54: In the given diagram, which is the column-roof slab connection node: No information.
• Question 55: In the provided image, which element represents the roof slab-beam connection node: No information.
• Question 56: In auxiliary buildings based on purpose, which area is for administrative and technical groups: Sanitary facilities, Canteen, Construction office, Medical care.
• Question 57: In auxiliary buildings based on purpose, which area is for everyday life: Medical care, Class lab, design office, Meeting hall.
• Question 58: In given diagram, which floor plan construction is completely ground-based: No information.
• Question 59: In given diagram, which floor plan construction is supported on roof span: No information.
• Question 60: In given diagram, which floor plan construction is supported by single roof slab: No information.
• Question 61: In given diagram, which floor plan construction is direct ground-based construction: No information.
• Question 62: In the given diagrams, which floor is made from clay concrete: No information.
• Question 63: Given drawings, which floor is made from rammed earth and gravel fill?: Unavailable from given data
• Question 64: Given drawings, which floor is made from asphalt concrete: Unavailable from given data
• Question 65: Given drawings, which floor is made from xilolite: No information.
• Question 66: Given drawings, which floor is constructed with timber or beams: No information.
• Question 67: Given drawings, which floor is constructed with brick: Unavailable from given data.
• Question 68: In the given diagrams, identify the rectangular light-transmitting vent: No information.
• Question 69: In the given diagrams, identify the triangular light-transmitting vent: No information.
• Question 70: In the given diagrams, identify the combined light-transmitting vent: No information.
• Question 71: In the provided diagrams which one represents a zenith lightwell: No information
• Question 72: What material is NOT permissible for industrial building windows: Glass, Reinforced concrete, Wood, Metal