Podcast Beta
Questions and Answers
To do so, the clamp is securely fastened to a convenient beam, and a line or small hoist then suspended from the _______
clamp
The standard screwdriver is used for most ordinary work and comes in a variety of sizes.The blade must have sharp corners and fit the slot in the screw closely. The three main parts of a screwdriver are Handle, Shank, and _______
blade
The offset screwdriver makes work possible in tight corners where the straight type will not enter.It has one blade forged in line with the shank, and the other blade at right angles to the _______
shank
The Phillips-type screwdriver is made with a specially shaped blade to fit Phillips-type cross-slot screws.The heads of these screws have two slots that cross in the _______
Signup and view all the answers
The ratchet screwdriver is used to drive or remove small screws _______
Signup and view all the answers
Pliers are a hand tool used for seizing and bending wires. Types of pliers include Side-cutting pliers, Long-nose pliers, and _______
Signup and view all the answers
Side-cutting pliers are used principally for holding and bending thin material or for cutting wire. They are also known as _______
Signup and view all the answers
Long-nose pliers make it possible to bend or form metal into a variety of shapes, to hold objects in tight spots, and to make delicate _______
Signup and view all the answers
Diagonal-cutting pliers have short jaws with blades at a slight _______
Signup and view all the answers
The clamp is securely fastened to a convenient beam, and a line or small hoist then suspended from the _______
Signup and view all the answers
