Safely Connecting External Batteries to Ventilators
19 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which mode delivers a set pressure when the person breathes a breath on their own?

  • IMV
  • CPAP (correct)
  • SIMV
  • AC

What does PIP stand for?

  • Pressure Support
  • Peak Inspiratory Pressure (correct)
  • Positive End Expiratory Pressure
  • Pressure Control

What does PEEP help to prevent?

  • Wheezing
  • Collapse of air sacs (correct)
  • Airway blockage
  • Leak in the tubing

Which power source is built into the ventilator and used for short term emergency power?

<p>Internal Direct Current (D/C) (A)</p> Signup and view all the answers

Which battery should be used when using the ventilator with a wheelchair?

<p>Another battery specifically for wheelchair use (C)</p> Signup and view all the answers

When should the external battery be recharged?

<p>After every use in a well ventilated area (A)</p> Signup and view all the answers

How should the external battery be recharged?

<p>Connect it to the charger and then plug the charger into the wall outlet (D)</p> Signup and view all the answers

How often should the external battery be discharged and recharged?

<p>Every month (C)</p> Signup and view all the answers

Which of the following is a reason why mechanical ventilation may be needed?

<p>The brain cannot send signals to the lungs to breathe (B)</p> Signup and view all the answers

What is the difference between total support and partial support in mechanical ventilation?

<p>Total support means the ventilator does all the breathing, while partial support means the person can breathe on their own in between breaths delivered by the ventilator (B)</p> Signup and view all the answers

What are the most common ventilator settings?

<p>Pressure support, PEEP pressure, FiO2 (D)</p> Signup and view all the answers

Which one of these is NOT a common name for a manual resuscitation bag?

<p>Emergency bag (B)</p> Signup and view all the answers

When should a manual resuscitation bag be used?

<p>All of the above (D)</p> Signup and view all the answers

What is the purpose of a Heat and Moisture Exchanger (HME)?

<p>To trap heat and moisture from exhaled air (B)</p> Signup and view all the answers

How often should the HME be changed?

<p>All of the above (D)</p> Signup and view all the answers

Which part of the ventilator circuit is a 6 foot hose that attaches to the exhalation port at one end and to the outlet port on the ventilator on the other end?

<p>B. The ventilator circuit tubing (A)</p> Signup and view all the answers

What is the purpose of the outlet filter in the ventilator circuit?

<p>A. To filter gas coming from the ventilator, going into the ventilator circuit tubing (C)</p> Signup and view all the answers

How often should the ventilator circuit, resuscitation bag, humidifier, and suction canister be cleaned?

<p>B. Once a week (A)</p> Signup and view all the answers

What should you do if the low pressure alarm does not sound during the 'Disconnect Test'?

<p>C. Try another circuit or use another ventilator (D)</p> Signup and view all the answers

More Like This

Use Quizgecko on...
Browser
Browser