10 Questions
What happens when the interfaces are configured with an appropriate IP address, subnetmask, and activated with the no shutdown command?
They are automatically added to the routing table as connected and local entries
What command is used to verify that the IPv6 networks and specific IPv6 interface addresses have been installed in the IPv6 routing table?
show ipv6 route
What is indicated by 'C' when using the show ipv6 route command?
Directly connected route
What does the 'L' indicate when using the show ipv6 route command in IPv6 routing?
Local route with IPv4
What can be used to verify connectivity in IPv6 routing?
ping command with specific IPv6 address
What is required for an interface to be added to the routing table as a directly connected route?
Assigned a valid IPv4 or IPv6 address
In IOS version 15 and later, what does the route source 'C' indicate?
A directly connected network
What action must be taken to activate an interface and add it to the IPv4 routing table?
Activate it with the no shutdown command
What happens when an active directly connected interface is created in IOS version 15 and later?
It creates two routing table entries
What information does the route source 'L' indicate in IOS version 15 and later?
The IPv4 address assigned to the router's interface
Test your knowledge about the configuration of router interfaces and the conditions required for an interface to be added to the routing table. Topics include assigning IP addresses, activating interfaces, and the requirements for interface state to be considered up/up.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
