16 Questions
What is the primary purpose of the bracing used during the erection of a rebar cage?
To hold the cage plumb during the placing of formwork and concrete casting
Why is the erection and bracing of column rebar cages often left to the means and methods of the contractor?
It is rarely under the guidance of a professional engineer
What are the potential consequences of the lack of guidance from a professional engineer during the erection of rebar cages?
Buckling and collapse of the rebar cage, leading to significant delays
What are the main hazards associated with the handling of rebar cages onsite?
Roll and crush hazards, as well as injury to workers
What safety measures are recommended to mitigate the risks associated with rebar cage handling?
Maintaining a safe distance from the cage and using appropriate lifting equipment
What is the primary method used to construct rebar cages on construction sites?
Connecting the longitudinal and transverse reinforcing bars using thin, cold-drawn tie wire
What is the purpose of a jack frame in construction?
To secure anchor bolts or stub angles in place
What is the main function of a rebar cage in construction?
To reinforce concrete structures
What is a key reason for pre-installed spacers on a rebar cage?
To center the cage in the shaft
Why are misplaced or misaligned anchor bolts considered a common problem in construction?
As a result of not securely positioning them
What is a critical step before releasing a rebar cage from the crane rigging?
Securing the cage to the top of the drilled shaft
In what part of a drilled shaft are longitudinal bars most required?
In the upper section near ground level
What does the rigging process involve when placing anchor bolts or stub angles?
Lifting and aligning with precision
Why are strict safety protocols necessary during handling and installation of rebar cages?
To prevent accidents and ensure project success
What is one of the main functions of anchor bolts or stub angles in construction?
To secure structures to concrete foundations
Why is it important for reinforcement within drilled shafts to be strongest at the top diameters?
To provide stability and strength near ground level
Test your knowledge on the steps and equipment involved in handling rebar cages, including construction, assembly, lifting, and bracing. Learn about the importance of bracing in ensuring the stability of the rebar cage during placement.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
