Raven Class Test Flashcards

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the operator manual definition of a caution?

A procedure, practice, or caution, etc. that may damage equipment if not carefully observed or followed.

What is the DDL transceiver module for CONUS use of the RF unit and Air Vehicle?

M1-1625-1725 MHz (OCONUS)

What is the length of the AV nose to stabilator?

36"

How long does it normally take for a GCS battery to charge?

90 Minutes Signup and view all the answers

What is the duration of the rechargeable AV in flight?

60-90 minutes Signup and view all the answers

What is meant by the term 'dead reckoning'?

Navigation by time, distance and heading. Signup and view all the answers

How does the AV compensate for crosswind?

Facing the nose of the AV into the wind (crabbing). Signup and view all the answers

What does the term mean sea level (MSL) stand for?

The altitude is above sea level. Signup and view all the answers

What is best meant by the term 'magnetic heading' or 'heading'?

The direction where the nose of the AV is pointing. Signup and view all the answers

What data on the aircraft controller display indicates a good GPS fix?

4+ Signup and view all the answers

What are the possible flight modes with the Raven system?

Manual, Altitude, Home, Loiter, Navigation. Signup and view all the answers

The Raven B air vehicle is comprised of how many components?

8 Signup and view all the answers

What is the last step in the pre-flight process prior to launch?

Start recorder. Signup and view all the answers

During pre-flight checks, what method is used to ensure that the stabilator is operating correctly?

Move the joystick back/forward and observe deflection. Signup and view all the answers

When conducting normal landing, what should the altitude be for executing 'autoland'?

75-100ft Signup and view all the answers

Does the AV automatically align into the wind during outland or LOL?

False Signup and view all the answers

What is the last step in the post-flight checklist?

Check locator. Signup and view all the answers

What does SAASM mean?

Selective Availability Anti-Spoofing Module. Signup and view all the answers

What is the acronym associated with plotting coordinates on a map?

REUP Signup and view all the answers

When transferring DTED from the FalconView laptop to the GCS hub, what is the area of map terrain covered by the transferred data?

50km x 50km (2500 sq km) Signup and view all the answers

What does DTED stand for?

Digital Terrain Elevation Data. Signup and view all the answers

The RSTA kit laptop loaded with the FalconView and RPUAV toolbar can be used in place of which component of the GCS system?

Mission Operator Hand Controller. Signup and view all the answers

The MO can observe and record mission video by using what RSTA kit software?

AV Screener DDL 'live'. Signup and view all the answers

Images stored in the HUB are captured using the 'image capture' button on the VO hand controller and are saved as what type of image files?

NITF Signup and view all the answers

Imaging processing both NITF and JPG image files can be found on the RSTA kit laptop on the 'C' drive under what folder?

C:/RPUAV_Logs Signup and view all the answers

What is the correct format of an OPORD?

Situation, Mission, Concept of operation, Service and support, Command and signal. Signup and view all the answers

When flying multiple SUAS in close proximity, what is the recommended separation of the GCS's?

250 meters Signup and view all the answers

When conducting multiple subs operations in close proximity, an AV should not be flown within what minimum distance to another AV's GCS?

175 meters Signup and view all the answers

What airspace document in theater provides projected sorties, capabilities, forces to include call signs, and targets?

Air Tasking Order (ATO). Signup and view all the answers

What are the three main types of separation used to de-conflict airspace?

Vertical, lateral, time. Signup and view all the answers

SUAS mission coordination should begin by filling out what document?

Airspace Mission Request Form (ACMREQ). Signup and view all the answers

How many lines are there in an immediate SUAS airspace mission request?

7 Signup and view all the answers

What is the minimum GCS hardware that must be used to operate the SUAS simulator without FalconView?

Laptop, simulator interface dongle, GCS HUB, GCS hand controller, GCS analog RF cable, GCS Battery. Signup and view all the answers

What are the SUAS simulator's five main operating screens?

Preflight, situation, security, environment, location. Signup and view all the answers

Study Notes

Caution Definition

A caution refers to actions or practices that may harm equipment if not closely followed.

DDL Transceiver Module

The DDL transceiver module for CONUS use operates from 1625 to 1725 MHz.

AV Dimensions

The length from the AV nose to the stabilator is 36 inches.

GCS Battery Charge Time

It typically takes 90 minutes to charge a GCS battery.

AV In-Flight Duration

The rechargeable AV can fly for approximately 60-90 minutes.

"Dead reckoning" is a navigation method based on time, distance, and heading.

Crosswind Compensation

The AV compensates for crosswind by crabbing, or positioning the nose into the wind.

Mean Sea Level (MSL)

MSL indicates altitude above sea level.

Magnetic Heading

Magnetic heading is the direction the AV's nose is pointing.

GPS Fix Indicator

A good GPS fix is indicated by a reading of 4 or more satellites.

Flight Modes of Raven System

Available flight modes include Manual, Altitude, Home, Loiter, and Navigation.

Components of Raven B Air Vehicle

The Raven B air vehicle consists of 8 components.

Pre-Flight Checklist

The final pre-flight step is to start the recorder.

Stabilator Operation Check

Ensure the stabilator is functioning by moving the joystick back and forth and observing deflection.

Autoland Altitude

The recommended altitude for executing "autoland" is between 75-100 feet.

AV Wind Alignment

The AV does not automatically align into the wind during outland or LOL.

Post-Flight Checklist

The last step in the post-flight checklist is to check the locator.

SAASM Explanation

SAASM stands for Selective Availability Anti-Spoofing Module.

Plotting Coordinates Acronym

The acronym for plotting coordinates on a map is REUP.

DTED Transfer Area

Transferring DTED data from FalconView to the GCS hub covers a terrain area of 50 km x 50 km (2500 sq km).

DTED Definition

DTED stands for Digital Terrain Elevation Data.

RSTA Kit Functionality

The RSTA kit laptop can replace the Mission Operator Hand Controller in the GCS system.

Mission Video Recording

The MO can observe and record mission video using the AV screener DDL "live" software from the RSTA kit.

Image Capture File Types

Images captured using the VO hand controller are saved as NITF image files.

Image File Processing Location

NITF and JPG image files are processed in the folder C:/RPUAV_Logs on the RSTA kit laptop.

OPORD Format

The correct OPORD format includes: Situation, Mission, Concept of Operation, Service and Support, and Command and Signal.

GCS Separation in Flight

Recommended separation distance when flying multiple SUAS is 250 meters.

SUAS Proximity Operations

AVs should not be flown within 175 meters of another AV’s GCS during close proximity operations.

Airspace Document in Theater

The air tasking order (ATO) provides information on projected sorties, capabilities, forces, call signs, and targets.

Airspace De-Conflict Types

The three main types of separation to de-conflict airspace are vertical, lateral, and time.

SUAS Mission Coordination Document

Coordination for SUAS missions begins by filling out the Airspace Mission Request Form (ACMREQ).

Immediate SUAS Mission Request Lines

There are 7 lines in an immediate SUAS airspace mission request.

Minimum GCS Hardware for SUAS Simulator

Essential GCS hardware to operate the SUAS simulator without FalconView includes a laptop, simulator interface dongle, GCS HUB, GCS hand controller, GCS analog RF cable, and GCS battery.

SUAS Simulator Main Operating Screens

The five main operating screens of the SUAS simulator are Preflight, Situation, Security, Environment, and Location.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

Test your knowledge with these flashcards designed for the Raven class. Covering key definitions and specifications, this quiz helps reinforce important concepts relevant to equipment operation and RF unit details. Perfect for students and practitioners alike who want to sharpen their understanding.