Radiography Quality Control and Personnel Monitoring Quiz
14 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the minimum standard lead equivalency for gloves used in radiography?

  • 1.5 mm
  • 0.25 mm (correct)
  • 0.5 mm
  • 1 mm
  • What is the purpose of the quality control check performed on lead aprons and gloves used in radiography?

  • To save costs on protective devices
  • To improve patient comfort
  • To meet state and federal regulations (correct)
  • To reduce radiation exposure of personnel
  • What is the name of the device used for monitoring radiation exposure of radiation workers?

  • Radiographic dosimeter
  • Occupational dosimeter
  • Fluoroscopic dosimeter
  • Personal dosimeter (correct)
  • What is the annual occupational effective dose (EfD) limit for radiation workers?

    <p>50 mSv</p> Signup and view all the answers

    What is the preferred location for wearing personal dosimeters?

    <p>On the chest</p> Signup and view all the answers

    What is the type of dosimeter used now instead of Thermoluminescent dosimeters (TLD)?

    <p>Optically stimulated luminescence (OSL) dosimeters</p> Signup and view all the answers

    What should be done if any cracks are seen during the quality control check of lead aprons or gloves?

    <p>They should be taken out of service</p> Signup and view all the answers

    What is the minimum standard lead equivalency for gloves used in radiography?

    <p>0.25 mm</p> Signup and view all the answers

    When is personnel monitoring required for radiation workers?

    <p>When workers are likely to risk receiving 10% or more of the annual occupational effective dose limit</p> Signup and view all the answers

    What is the name of the device used for monitoring radiation exposure of radiation workers?

    <p>Personal Dosimeter</p> Signup and view all the answers

    What is the name of the dosimeter used instead of Thermoluminescent dosimeters (TLD)?

    <p>Optically stimulated luminescence (OSL) dosimeters</p> Signup and view all the answers

    Where should personal dosimeters be worn on the body?

    <p>On the anterior surface of the body</p> Signup and view all the answers

    What is the annual occupational effective dose limit for radiation workers?

    <p>50 mSv</p> Signup and view all the answers

    What happens if any cracks are seen during the quality control check of lead aprons or gloves?

    <p>The apron or glove is taken out of service</p> Signup and view all the answers

    Study Notes

    Quality Control and Personnel Monitoring in Radiography

    • Radiographers perform a quality control check every 6 months on lead aprons and gloves used in the department to meet state and federal regulations.
    • The minimum standard lead equivalency for aprons is 0.5 mm and for gloves is 0.25 mm.
    • The check is performed by placing the apron or glove on a fluoroscopic x-ray table and checking the entire area of lead using the fluoroscopic beam.
    • Any cracks seen during the check require the apron or glove to be taken out of service.
    • The check of these protective devices must be documented in the department's quality control logs.
    • Personnel Monitoring Devices for monitoring radiation exposure of radiation workers are called personal dosimeters.
    • Monitoring is required whenever radiation workers are likely to risk receiving 10% or more of the annual occupational effective dose (EfD) limit of 50 mSv.
    • Optically stimulated luminescence (OSL) dosimeters are used now instead of Thermoluminescent dosimeters (TLD) and have several additional advantages.
    • Personal dosimeter laboratories provide badges, processing service, and reports, and they keep permanent records of the radiation exposure of each person monitored.
    • Service may be arranged on a weekly, monthly, or quarterly basis depending on the level of exposure.
    • Personnel should be advised of the radiation exposure reported from their badges and should be provided with copies of the annual reports for their own records.
    • Personal dosimeters should be worn in the region of the collar on the anterior surface of the body and should never be taken from the clinic or hospital to go shopping, home, or to other non-medical areas.

    Quality Control and Personnel Monitoring in Radiography

    • Radiographers perform a quality control check every 6 months on lead aprons and gloves used in the department to meet state and federal regulations.
    • The minimum standard lead equivalency for aprons is 0.5 mm and for gloves is 0.25 mm.
    • The check is performed by placing the apron or glove on a fluoroscopic x-ray table and checking the entire area of lead using the fluoroscopic beam.
    • Any cracks seen during the check require the apron or glove to be taken out of service.
    • The check of these protective devices must be documented in the department's quality control logs.
    • Personnel Monitoring Devices for monitoring radiation exposure of radiation workers are called personal dosimeters.
    • Monitoring is required whenever radiation workers are likely to risk receiving 10% or more of the annual occupational effective dose (EfD) limit of 50 mSv.
    • Optically stimulated luminescence (OSL) dosimeters are used now instead of Thermoluminescent dosimeters (TLD) and have several additional advantages.
    • Personal dosimeter laboratories provide badges, processing service, and reports, and they keep permanent records of the radiation exposure of each person monitored.
    • Service may be arranged on a weekly, monthly, or quarterly basis depending on the level of exposure.
    • Personnel should be advised of the radiation exposure reported from their badges and should be provided with copies of the annual reports for their own records.
    • Personal dosimeters should be worn in the region of the collar on the anterior surface of the body and should never be taken from the clinic or hospital to go shopping, home, or to other non-medical areas.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Description

    Test your knowledge on quality control and personnel monitoring in radiography with this informative quiz. From lead apron and glove checks to personal dosimeters, this quiz covers all the essential information you need to know to ensure safety in the workplace. Brush up on the regulations and protocols required by state and federal guidelines, as well as the latest advancements in monitoring technology. Take the quiz now to see how much you know about protecting yourself and others from radiation exposure.

    More Like This

    Radiology Quality Control
    5 questions
    Quality Assurance in Radiography
    18 questions
    X-ray Beam Quality and Filtration
    10 questions
    Use Quizgecko on...
    Browser
    Browser