Harris RF-5800H Radio Set Quiz & Flashcards

Questions and Answers

What is the maximum power output of the Harris RF-5800H radio set without a power amplifier?

150 watts

400 watts

20 watts (correct)

10 watts

Which feature of the RF-5800H allows it to send messages in poor communication environments?

Hopping capability

LDV (Last ditch voice) (correct)

3G mode

Automatic Massage Display

Which of the following is true regarding the outer body of the RF-5800H radio set?

It should not be painted at all. (correct)

It can be painted with a different color.

The color enhances communication range.

The color protects against chemical environments.

What is the maximum depth the RF-5800H can operate underwater?

0.9 meters Signup and view all the answers

Which technology is used in the RF-5800H to ensure secure communication against electronic countermeasures?

Hopping bands Signup and view all the answers

Which battery sources can the Harris RF-5800H operate on?

Both dry and secondary batteries Signup and view all the answers

In what mode can SMS be sent using the RF-5800H?

3G mode Signup and view all the answers

What is the significance of the chemical paint on the RF-5800H?

To change the color in chemical environments Signup and view all the answers

What purpose does the Ciphering Key serve in communication systems?

Encrypting messages for secure communication Signup and view all the answers

In which mode do all stations work on the best available frequency?

ALE Signup and view all the answers

What is the maximum operating frequency range for high-frequency communication systems?

1.6 - 29.9999 Megahertz Signup and view all the answers

What component is primarily used to check internal equipment functionality?

Built-in Test (BIT) Signup and view all the answers

Which type of modulation is NOT mentioned as a part of the radio set specifications?

QAM Signup and view all the answers

What is the primary function of the Power Amplifier RF-5833 H?

To boost the power output of the radio Signup and view all the answers

Which connector would you use to connect a GPS receiver to the RF-5800H?

GPS Connector Signup and view all the answers

Which statement regarding the battery types is correct?

Battery types include BB-590, BB-390/U, and BA/BB-2590/U Signup and view all the answers

What is the purpose of the Zeroize function in the radio set?

To delete sensitive data from the system Signup and view all the answers

What is the communication range for very high frequency systems?

30 Kilometers Signup and view all the answers

What does the R and T indicate in a communication device?

Receiver and Transmitter status Signup and view all the answers

What does the coupling control connector (J-9) achieve?

Tunes frequency between coupler and mount Signup and view all the answers

Which function does the SQ button serve in the radio set?

Switches the squelch on and off Signup and view all the answers

Which of the following parts serves as the main communication source in the RF-5800H system?

Receiver Transmitter Signup and view all the answers

What does the Traffic Encryption Key (TEK) indicate?

Encryption key details Signup and view all the answers

What is the function of the fuse in the RF-5800H radio set?

To prevent short circuits Signup and view all the answers

What does the H in H-250/U signify in the context of handsets?

Handheld operation Signup and view all the answers

What can be controlled using the +VOL- button?

Volume adjustment Signup and view all the answers

Which connector is used for grounding in the power supply controls?

Ground Post Signup and view all the answers

What does the Control Connector J-2 provide?

Power mounting to the coupler Signup and view all the answers

What does the yellow indicator on the loudspeaker signal?

Transmission power output Signup and view all the answers

Which component is responsible for changing the mode of the radio?

Mode Button Signup and view all the answers

What is the main purpose of the RF input connector (J-1)?

Connects RF antenna cable Signup and view all the answers

What does the Clear Button do in the radio set?

Cancels any current operation Signup and view all the answers

What type of information does the System Preset display?

Network name Signup and view all the answers

What is indicated by the green indicator on the loudspeaker?

On/Off status of the speaker Signup and view all the answers

What does the Modem indicator show in the device?

Data transmission modem in use Signup and view all the answers

Which button would be pressed to select a function in the radio set?

ENT Button Signup and view all the answers

What is the correct sequence of operations for sending a message using the ALE mode?

Highlight MOD, select ALE MOD, edit message, then transmit Signup and view all the answers

Which frequencies are associated with the Narrow Band hopping mode?

7.612 megahertz central frequency Signup and view all the answers

What should be highlighted to check the name of the radio station?

Radio name Signup and view all the answers

What is required to successfully complete a sync signal in hopping mode?

The receiving station must respond to the sync signal Signup and view all the answers

Which of the following is NOT a feature of the 3G mode compared to ALE mode?

Lesser channels are scanned Signup and view all the answers

What information can be extracted when checking the battery status?

Battery voltage and status Signup and view all the answers

In which situation is LAST DITCH VOICE (LDV) used?

When in 3G mode experiencing crypto sync failures Signup and view all the answers

Which option must be selected to access the configuration settings related to radio?

CONFIG Signup and view all the answers

What is the primary action required before hailing a station in hopping mode?

Ensure the net is functioning on fixed mode Signup and view all the answers

Which key operation allows you to edit a message before sending it?

Select EDIT after highlighting the message Signup and view all the answers

What must be displayed for a successful exchange between sender and receiving station?

SYNC SIG / SYNC REQUEST Signup and view all the answers

Which antenna configuration is set for the List Band hopping mode?

BYPASS/DISABLE Signup and view all the answers

What does pressing push button number 3 (MOD) allow you to select?

HOP mode Signup and view all the answers

How many channels are available in the ALE mode?

00 to 99 Signup and view all the answers

What operation should be highlighted for establishing a link with a single station in ALE Mode?

Individual Signup and view all the answers

Which position should the function switch be set to when preparing the preset channel?

PT or CT Signup and view all the answers

What is the purpose of Link Quality Analysis (LQA) in the manual operation?

To ensure a strong connection before linking Signup and view all the answers

What appears on the display after selecting the 'Group' operation in ALE Mode?

Add operation for station selection Signup and view all the answers

Which option allows the establishment of a link with the whole net while in 3G mode?

Net operation Signup and view all the answers

In the preset channel preparation, which modulation options are available for selection?

USB, LSB, AME, CW, FM Signup and view all the answers

How long can the link termination time be set in RPA?

Maximum 999 seconds Signup and view all the answers

Which operation should be selected for sending an SMS in 3G mode?

MSG Signup and view all the answers

What should you do first to index the required data before establishing a link?

Highlight the data Signup and view all the answers

What operation includes options for establishing a connection to any station with a good link in ALE Mode?

Automatic Signup and view all the answers

Which option allows the selection of receiving frequency while preparing the preset channel?

Frequency Signup and view all the answers

What should be selected after entering 'PRESET' to continue preset channel preparation?

CHANNEL Signup and view all the answers

Which operations appear after pressing the call button in 3G mode once Mod has been applied?

Synchronized Request, Best, Automatic, Manual Signup and view all the answers

What is the final step when preparing the preset system after selecting inputs?

Enable preset system Signup and view all the answers

What is the primary function of the GPS Antenna Kit (10511-0400-01)?

To improve GPS reception quality Signup and view all the answers

Which equipment is used to connect the antennas in the communication setup?

Base whip adopter Signup and view all the answers

What is the function of the Receiver Transmitter RT-5800H in the radio setup?

Signal transmission and reception Signup and view all the answers

Which cable is essential for connecting the RF output of the coupler to the antenna base?

High voltage accessory cable Signup and view all the answers

Which procedure involves preparing communication channels in the Radio Set Harris RF-5800H?

Manual frequency feeding Signup and view all the answers

What task does the vehicle shock mount (MRF 5211) primarily serve in the radio setup?

Stabilizing the receiver transmitter Signup and view all the answers

In the context of radio operations, what does ALE mode refer to?

Automatic link establishment mode Signup and view all the answers

What is the primary use of the Direct Current power cable in the radio setup?

To connect power supplies to devices Signup and view all the answers

Which mode allows the operator to send short messages effectively?

3G mode Signup and view all the answers

What role does the Cap assembly (10372-1240-01) play in the antenna setup?

Connects antennas to the base Signup and view all the answers

What is the function of the Battery checking procedure in the operating procedures?

To monitor battery levels for optimal function Signup and view all the answers

Which component is used for connecting the radio set to a computer for programming?

Data Cable Signup and view all the answers

What happens during the 'Calling on hopping mode (synchronization)' procedure?

Two-way communication is established Signup and view all the answers

What is the purpose of the Antenna Coupler (RF-5382H)?

To connect and match antenna impedance Signup and view all the answers

Study Notes

Introduction to Harris RF-5800H Radio Set

Importance of effective communication on the battlefield is crucial for achieving decisive victories.
RF-5800H is among the world's most advanced high-frequency (HF) and very high-frequency (VHF) radio sets.
Utilizes multiple operating options: vehicle-mounted, man-pack, and ground role.

Part-1: General and Technical Overview

General Specifications

Capable of operating in HF and VHF bands with power outputs of 1, 5, 10, and 20 watts; up to 400 watts with an amplifier.
Operates using dry batteries or conventional electricity.
Designed with a chemical-resistant outer body.
GPS connectivity is available.
Supports secure communication with up to 19 hopping bands to counter ECCM (Electronic Counter Counter Measure).
Functions effectively in poor communication environments using LDV (Last Ditch Voice) in 3G mode.
SMS and AMD capabilities integrated through ALE (Automatic Link Establish).

Technical Terms

Plain Text (PT) and Cipher Text (CT) are used for communication clarity and security respectively.
Modes include Fixed, Hopping, ALE, and 3G with automated frequency management.
Link Quality Analysis (LQA) helps determine optimal operating frequencies.

Part-2: Technical Data

Frequency Range: 1.6 - 59.9999 MHz
HF range: 1.6 - 29.9999 MHz; VHF range: 30 - 59.9999 MHz.
200 preset channels global with single settings.
Weight: 4.5 kg; operational at extreme temperatures (-40°C to +70°C).
Unlimited communication range for HF; 30 km for VHF.
Capable of 8.8 hops per second with significant channel availability (HF: 284,000; VHF: 300,000).

Main Parts of RF-5800H

Key components include:
- Vehicle Shock Mount (RF-5211 VSM)
- Receiver Transmitter (RT-5800 HMP)
- Loudspeaker (MRC-67A)
- Various power supply options and antenna couplers.

Corresponding Sets

Compatible with various models including PK/VRC-786/787 and SDR-9661.

Controls and Functionality

RF-5211 Remote Control Mechanics

Connectors for audio, GPS, power input, and coupler control are strategically located for ease of operation.
Features an LCD display showing modes, battery status, signal strength, and system presets.

Operating Procedures

Initiate radio operations by connecting necessary components, verifying power, and setting frequencies.
Capability to transmit short messages, make calls, and switch between operational modes (ALE vs 3G).
Routine checks on battery and communication systems are essential for maintaining operational readiness.

Associated Equipment

Antenna and Audio Equipment

A diverse range of antennas (e.g., OE-505, RF-1940/1941) supports communication efficacy.
Modified handsets and loudspeakers enhance audio clarity for operators.

Miscellaneous Equipment

KDU Extension Cable enables remote operation of the Key Display Unit.
Ground Stick Kit is crucial for grounding the system to avoid electrical interference.

Connecting Procedures

Assembly Steps

Essential steps include fitting the mounting unit, receiver transmitter, power supply, loudspeaker, and antenna components properly together.

Connection Methods

Initial set-up involves careful connection of audio and power cables to ensure functionality.

Conclusion

Comprehensive understanding and familiarity with the RF-5800H's operation, components, and connectivity are critical for effective communication in the field.
Mastery of its functionalities and technical specifications prepares operators to optimize performance in diverse battlefield scenarios.### Voice Communication Procedures
Manual OFF for hopping ARQ and ALE mode indexes requires selection of CLEAR from operations.
Function switch must be on CT to select TEK-01 (addresses from 01 to 99).

Establishing Link on 3G Mode

Keep the function switch on PT or CT.
Activate 3G mode via pushbutton number 3 (Mod).
Press call button (1) to display options: Synchronized Request, Best, Automatic, Manual.
Selecting Best or Automatic leads to further options: Net and Station for linking.
Link Quality Analysis (LQA) conducted before manual operations to ensure channel reliability.
Maximum link termination set at 999 seconds; if inactive, link will terminate.

Establishing Link on ALE Mode

Similar to 3G mode, keep the function switch on PT or CT.
Enter ALE mode using button 3; options displayed are Automatic and Manual.
In Automatic mode, options include All, Any, Individual, Group, and Net to establish a link.
Individual option allows selection from a station list after linking analysis.
Manual operation requires channels with good LQA scores to be identified before linking.

Preparing Preset Channel

Set function switch to PT or CT and press button 3 (Mod) to choose FIX, HOP, ALE, or 3G.
Use Program button to initiate operations: SCHED, ACCESS, MODE, CONFIG.
Navigate to PRESET, followed by CHANNEL selection to input specific channel details.
Complete configuration includes setting frequencies, modulation, transmission power limits, and whether to enable hail transmission.

Preparing Preset System

Similar step to preset channel but emphasizes creating and naming the preset system.
Select data modem and encryption type, along with specifying vocational options before finalizing the system.

SMS Sending in 3G Mode

Switch to PT or CT and select 3G mode using button 3 (Mod).
Access MSG to input a new message, choosing to send to NET or STATION.

AMD Sending in ALE Mode

Follow the same initial steps as SMS sending but choose ALE mode.
Use programming options to edit and send messages, allowing for manual or automatic transmission modes.

Short Message Service (SMS) and Last Ditch Voice (LDV) Reading

Enter interface for reading messages from the display unit to check for any received messages.

Checking Radio Name Station-wise

Access station parameters to check details including frequency modulation, transmission power, and squelch level.

Operating on Hopping Mode

Activate hopping mode using button 3 while ensuring the net is displayed.
Call button leads to SYNC SIG/SYNC REQUEST operations; wait for responses to establish hopping communication.

Hailing Operation

Initiate hail from a fixed mode channel to allow new stations to join the hopping network.

Changing Antenna Position

Change settings via configuration options to match the antenna type (e.g., RF-5382, 50 OHM).

Differences Between ALE and 3G Modes

3G allows linking at lower SNRs compared to ALE, with distinct channel ranges.
More data can be transferred in 3G, which lacks manual programming compared to ALE.
3G provides SMS capabilities while ALE allows AMD transmissions.
3G linking is faster; LDVs are exclusive to 3G.

Battery Checking Procedure

Activate the radio and use mode button (3) to access battery options through TEST menu, focusing on voltage and status readings.

Procedure for Sending LDV

LDV can only be sent in 3G mode, activating the voice mode promptly when cryptographic sync issues arise. Completion of the LDV message indicated on display.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

Explore the capabilities and importance of the Harris RF-5800H radio set in military communication. Understand how essential it is for maintaining communication in the battlefield for successful operations. This quiz covers the technical details and operational significance of the RF-5800H.

Radio Set Harris RF-5800H Overview