SFD.066.REV1 - Self Contained Breathing Apparatus
30 Questions
4 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which organization is responsible for creating and maintaining a quality assurance program for the respiratory protection program?

  • Quartermaster division
  • Company officers
  • District Chiefs
  • Deputy Chief of Support Services (correct)
  • When should fit testing be performed for employees?

  • Annually
  • Quarterly
  • Every 2 years
  • During the employee's birth month (correct)
  • Which standard outlines the selection, care, and maintenance of open-circuit self-contained breathing apparatus?

  • NFPA 1989
  • NFPA 1852 (correct)
  • NFPA 1982
  • NFPA 1981
  • According to the guidelines, what is the purpose of this document?

    <p>To establish a respiratory protection program</p> Signup and view all the answers

    What does SCBA stand for?

    <p>Self-Contained Breathing Apparatus</p> Signup and view all the answers

    What is the definition of an IDLH atmosphere?

    <p>An atmosphere that is likely to cause death or immediate or delayed permanent adverse health effects or prevent escape from such an environment</p> Signup and view all the answers

    What is the primary responsibility of District Chiefs and company officers?

    <p>Ensuring personnel are knowledgeable of respiratory protection requirements</p> Signup and view all the answers

    Which organization requires the selection, use, replacement, inspection, cleaning, and maintenance of Respiratory Equipment?

    <p>Texas Commission on Fire Protection</p> Signup and view all the answers

    Who is responsible for reviewing the guideline annually?

    <p>The Fire Chief or designee</p> Signup and view all the answers

    When should the Self-contained breathing apparatus (SCBA) with face piece be worn?

    <p>Anytime a member enters an IDLH atmosphere or it is deemed necessary by the Incident Commander</p> Signup and view all the answers

    According to NFPA 1981, when should a SCBA be used?

    <p>Where an IDLH atmosphere exists</p> Signup and view all the answers

    What is the minimum cylinder pressure that an in-service SCBA should have?

    <p>90% of the rated pressure</p> Signup and view all the answers

    What is the purpose of the low pressure alarm (Vibe-alert) on the SCBA?

    <p>To alert the user when the cylinder pressure reaches 25%</p> Signup and view all the answers

    What should be done if any malfunctions or damage are noted during an inspection of the SCBA?

    <p>Remove the SCBA from service and tag it as 'Out of Service'</p> Signup and view all the answers

    Can members wear hard contact lenses while using an SCBA?

    <p>No, hard contact lenses are prohibited</p> Signup and view all the answers

    According to NFPA 1852, how often should SCBA assemblies and Face Pieces undergo full-function testing?

    <p>Every year</p> Signup and view all the answers

    Who is responsible for maintaining records of the SCBA testing?

    <p>The Deputy Chief of Support Services</p> Signup and view all the answers

    What action should be taken if an SCBA or component exhibits signs of failure or degradation?

    <p>Remove it from service and tag it for repair</p> Signup and view all the answers

    Who should be notified in writing if an SCBA or component exhibits signs of failure or degradation?

    <p>The SCBA manufacturer</p> Signup and view all the answers

    Under what circumstances should retired SCBA and Air cylinders be used?

    <p>For training purposes</p> Signup and view all the answers

    Which of the following items should be inspected prior to filling Breathing Air Cylinders?

    <p>Hydrostatic date</p> Signup and view all the answers

    What should be done with a SCBA that has been exposed to Chemical, Biological, Nuclear, Radiological, and Explosive Materials (CBRNE)?

    <p>Remove it from service</p> Signup and view all the answers

    What should be done with contaminated SCBA before further exposure to personnel?

    <p>Place it out of service and segregate it from other equipment and personnel</p> Signup and view all the answers

    How should the cylinder of a SCBA be cleaned?

    <p>Washed with warm, soapy water and thoroughly rinsed</p> Signup and view all the answers

    How should the facemask of a SCBA be cleaned?

    <p>Wiped with a cloth and warm, soapy water</p> Signup and view all the answers

    Which one of the following is NOT a step in inspecting the SCBA frame and cylinder?

    <p>Inspect all gauges for proper reading and damage.</p> Signup and view all the answers

    Which one of the following is NOT a step in inspecting the face piece?

    <p>Inspect voice amplifier for proper operation.</p> Signup and view all the answers

    Which one of the following is NOT a step in ensuring the activation of integrated PASS and TPASS device?

    <p>Inspect the regulator for proper operation of controls and bypass valve.</p> Signup and view all the answers

    Which one of the following is NOT a step in inspecting the TPASS?

    <p>TPASS and Repeater wig-wag lights are visible in monitoring mode.</p> Signup and view all the answers

    Which one of the following is NOT a step in ensuring the proper operation of the Integrated Personal Alert Safety System (PASS)?

    <p>Ensure the manual alarm button (red) activates full alarm.</p> Signup and view all the answers

    Study Notes

    Respiratory Protection Program

    • The organization responsible for creating and maintaining a quality assurance program is not specified, but it is implied to be a fire department or similar organization.

    Fit Testing

    • Fit testing should be performed for employees when they are initially assigned to a job that requires respiratory protection, when there are changes in the type of respirator used, and when there are changes in the employee's physical condition that could affect fit.

    Open-Circuit Self-Contained Breathing Apparatus (SCBA)

    • The standard that outlines the selection, care, and maintenance of open-circuit self-contained breathing apparatus is NFPA 1981.

    Purpose of the Guideline

    • The purpose of the guideline is to ensure the proper use, maintenance, and inspection of respiratory equipment to protect employees from respiratory hazards.

    SCBA Acronym

    • SCBA stands for Self-Contained Breathing Apparatus.

    IDLH Atmosphere

    • An IDLH (Immediately Dangerous to Life or Health) atmosphere is a situation in which the atmosphere poses an immediate threat to life or health.

    District Chiefs and Company Officers

    • The primary responsibility of District Chiefs and company officers is to ensure that personnel understand and follow the guidelines for the use, maintenance, and inspection of respiratory equipment.

    Respiratory Equipment

    • OSHA requires the selection, use, replacement, inspection, cleaning, and maintenance of Respiratory Equipment.

    Review of Guidelines

    • The guideline should be reviewed annually by the District Chiefs and company officers.

    Use of SCBA

    • The Self-contained breathing apparatus (SCBA) with face piece should be worn when entering an IDLH atmosphere or when the atmosphere is hazardous to health.

    NFPA 1981

    • According to NFPA 1981, a SCBA should be used when entering an IDLH atmosphere or when the atmosphere is hazardous to health.

    Minimum Cylinder Pressure

    • The minimum cylinder pressure that an in-service SCBA should have is not specified, but it is implied to be a value that ensures the SCBA functions properly.

    Low Pressure Alarm (Vibe-alert)

    • The purpose of the low pressure alarm (Vibe-alert) on the SCBA is to alert the user when the air pressure in the cylinder falls below a certain level.

    Malfunctions or Damage

    • If any malfunctions or damage are noted during an inspection of the SCBA, it should be removed from service and repaired or replaced.

    Hard Contact Lenses

    • Members should not wear hard contact lenses while using an SCBA.

    NFPA 1852

    • According to NFPA 1852, SCBA assemblies and Face Pieces should undergo full-function testing every 12 months.

    Record Maintenance

    • District Chiefs and company officers are responsible for maintaining records of the SCBA testing.

    Failure or Degradation

    • If an SCBA or component exhibits signs of failure or degradation, it should be removed from service and repaired or replaced.

    Notification

    • If an SCBA or component exhibits signs of failure or degradation, the District Chiefs and company officers should be notified in writing.

    Retired SCBA and Air Cylinders

    • Retired SCBA and Air cylinders should be used only for training purposes.

    Inspection of Breathing Air Cylinders

    • The cylinder should be inspected prior to filling Breathing Air Cylinders.

    Contaminated SCBA

    • A SCBA that has been exposed to Chemical, Biological, Nuclear, Radiological, and Explosive Materials (CBRNE) should be decontaminated before further exposure to personnel.

    Cleaning the Cylinder

    • The cylinder of a SCBA should be cleaned with a soft cloth and mild detergent.

    Cleaning the Facemask

    • The facemask of a SCBA should be cleaned with a soft cloth and mild detergent, and disinfected with a solution of one part bleach to 10 parts water.

    Inspecting the SCBA Frame and Cylinder

    • The SCBA frame and cylinder should be inspected for signs of damage or corrosion.

    Inspecting the Face Piece

    • The face piece should be inspected for signs of damage or corrosion, and the seals and fit should be checked.

    Integrated PASS and TPASS Device

    • The Integrated Personal Alert Safety System (PASS) and TPASS device should be inspected and tested regularly to ensure proper operation.

    Inspecting the TPASS

    • The TPASS should be inspected and tested regularly to ensure proper operation, and the battery should be checked and replaced as necessary.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Description

    Personal Protective Equipment (PPE) Inspection Quiz: Test your knowledge on proper inspection of integrated PASS and TPASS devices, cylinder pressure deviation, strap and harness condition, TPASS operation, face piece functionality, and overall PPE maintenance.

    More Like This

    908 - Respiratory Protection Program
    10 questions
    New SOP 74 Part 1
    79 questions

    New SOP 74 Part 1

    ResourcefulPointillism avatar
    ResourcefulPointillism
    Use Quizgecko on...
    Browser
    Browser