OSHA Module 4 Flashcards

Which of the following is an example of a physical hazard for which employers must provide PPE?

___ are a type of eye protection that completely encloses the eyes and the facial area immediately surrounding the eyes.

Which of the following characteristics must be present on all hard hats?

Which of the following is the employee's responsibility?

___ respirators filter to purify the air as the worker breathes it in.

Who is responsible for providing training to employees on possible hazards and the appropriate PPE?

The units 'decibels' are used to measure ___

When workers may be exposed to ___, employers must also provide ___ within no more than 10 seconds of the worksite.

The new ASTM standards for footwear specify that it should:

A __ can occur when you repeat the same movement again and again over a long period of time.

Employers must provide PPE to protect against physical hazards, such as sharp objects.
Employees are responsible for wearing required PPE and should be properly trained on its use.
Employers must provide training on potential hazards and appropriate PPE to employees.

Safety goggles are a type of eye protection that completely encloses the eyes and surrounding facial area.
Air-purifying respirators filter the air to purify it as the worker breathes.

All hard hats must include a suspension system for proper fitting and safety.
New ASTM standards for footwear specify multiple criteria to ensure safety, connoting comprehensive protection.

Loudness in the workplace is measured in decibels, emphasizing the importance of hearing protection.

When workers may be exposed to corrosive materials, employers must ensure an eyewash station is available within 10 seconds of the worksite.

Repetitive motion injuries can happen from consistently repeating the same movements over a prolonged period, highlighting the need for ergonomic practices.