Operational Amplifiers Quiz
15 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the purpose of a voltage follower?

To have a gain of 1 and output voltage that follows the input voltage.

What are the main characteristics of an instrumentation amplifier?

High input impedance, high CMRR, and high gain.

What is the function of a pacemaker?

To produce periodic electric pulses to stimulate the heart.

What is one benefit of using an instrumentation amplifier?

<p>It can minimize artifacts at the electrode-electrolyte interfaces.</p> Signup and view all the answers

How many channels are there in the TI ADS1298 ECG circuit?

<p>8 channels.</p> Signup and view all the answers

What is the half-cell potential of the Ag/AgCl electrode used in the laboratory study?

<p>0.233 V</p> Signup and view all the answers

When measuring the dc voltage between the test electrode and the Ag/AgCl electrode, what voltage is observed with the test electrode being negative?

<p>0.572 V</p> Signup and view all the answers

What is the circuit model for the electrode based on the impedance measurements at very low currents?

<p>Not specified</p> Signup and view all the answers

What does the equation 𝑰 = 𝟏𝟎𝟎𝒆−𝒕Τ𝟏𝟎 represent in the context of the AgCl layer growth on the Ag electrode?

<p>Current passing through the cell during AgCl layer growth</p> Signup and view all the answers

If the reaction runs for a long period so the current at the end is essentially zero, how much charge is removed from the battery?

<p>Infinite charge</p> Signup and view all the answers

How many grams of AgCl are deposited on the Ag electrode's surface during the reaction?

<p>Not specified</p> Signup and view all the answers

What solution is the chloride electrode placed into for the subsequent experiment mentioned?

<p>1 liter of 0.9 molar NaCl solution</p> Signup and view all the answers

What current density was used to deposit the AgCl layer to achieve the lowest electrode-electrolyte impedance?

<p>100 and 500 mA/sq.cm</p> Signup and view all the answers

At what current density was the AgCl layer deposited with a current density of 5 mA/cm2?

<p>Not specified</p> Signup and view all the answers

What is the significance of measuring impedance at very low currents in electrode studies?

<p>To reduce artifacts at electrode-electrolyte interfaces</p> Signup and view all the answers

More Like This

Operational Amplifiers Quiz
10 questions
Operational Amplifiers (Op-Amps) Quiz
10 questions
Operational Amplifiers Overview
10 questions
Use Quizgecko on...
Browser
Browser