15 Questions
What is the recommended tire pressure for off-road driving in mud and sand?
2.00 bar for the front axle and 3.70 bar for the rear axle
What is the fuel tank capacity of the vehicle?
400 litres
What is the recommended wheel nut torque setting?
575 Nm
What is the recommended oil type for the Top Hamper Hydraulic System?
OX75 - BUM
What is the recommended procedure for checking the oil level with the transmission and engine hot?
Run the engine at 1800 rpm for 10 minutes, then idle at 600-800 rpm for 2 minutes, and check the dipstick
What is the recommended procedure for checking the oil level with the transmission and engine cold?
Run the engine at 1200-1500 rpm for 15-20 seconds, then idle at 600-800 rpm for 2-3 minutes, and check the dipstick
What is the recommended oil type for the Central Hydraulic System?
OX75 - BUM
What is the recommended procedure for topping up the oil level in the transmission?
Add 1 litre of oil, which will raise the level by approximately 10 mm
What is the overall height of the recovery vehicle to the top of the cab?
3034 mm
What is the ground clearance at the rear of the recovery vehicle?
390 mm
What is the maximum fording depth for unprepared conditions?
1500 mm
How many litres of oil are required for the recovery vehicle?
42 Litres
What is the turning circle of the recovery vehicle (wall to wall)?
28.6 m
At what speed can the recovery vehicle operate?
88 kph
What is the maximum gross train weight (GTW) of the recovery vehicle?
72000 kg
Test your knowledge on off-road driving wheels and tyres with this quiz covering topics like tyre sizes, pressure settings, wheel nut torque, and fuel tank capacity. Learn about the specifications required for driving on mud, sand, and cross-country terrains.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
