Network Inspection Device Management

What must be the minimum version of SMS required to upgrade to v5.5?

v5.3.0

Which type of segments require external ZPHA if needed?

SFP/SFP+

What is the purpose of the VMware vCenter server in the deployment of the vSMS.ovf file?

Not required for deployment

Which company's product is mentioned in the provided text?

Trend Micro Inc. Signup and view all the answers

What does TOS stand for in the context of the provided text?

TippingPoint Operating System Signup and view all the answers

What will the SMS confirm during TOS Inventory and Distribution?

Devices to update and device family limitations Signup and view all the answers

What is responsible for controlling the Integrated ZPHA bypass in software?

Copper only Signup and view all the answers

What is required if upgrading from a release earlier than v5.3.0 to v5.5?

Upgrade to v5.3.0 first Signup and view all the answers

What will be updated after TOS update distribution is complete?

Distribution history Signup and view all the answers

What happens if the power through the USB cable is interrupted for the ZPHA Chassis?

The ZPHA instantly switches over to reroute the network traffic Signup and view all the answers

Why is a ZPHA module not engaged when traffic is not being inspected?

To ensure that no traffic is blocked Signup and view all the answers

What is the maximum number of segments supported by the Modular ZPHA chassis?

5 Signup and view all the answers

Can a ZPHA chassis be shared between IPS units?

No, it cannot be shared between IPS units Signup and view all the answers

What are the ZPHA Bypass Modules designed to do?

Permit network traffic and services while bypassing the IPS entirely when the IPS loses power Signup and view all the answers

What is required to control the integrated ZPHA bypass?

Software control only Signup and view all the answers

Which type of Fiber Bypass Module supports 1-Segment 40G Fiber SR Bypass?

1-Segment 40G Fiber LR Bypass (LC type) Signup and view all the answers

What is the main purpose of the device described in the text?

To allow good traffic and drop bad traffic Signup and view all the answers

How is the device typically deployed on a network segment?

It is installed inside the firewall interface Signup and view all the answers

What is the purpose of Layer 2 Fallback (L2FB)?

To manually remove the inspection engine from consideration Signup and view all the answers

What is Intrinsic HA (L2FB) according to the text?

A global setting for the device Signup and view all the answers

How does the device aim to avoid detection by attackers undertaking reconnaissance?

By being 'invisible' from the network's perspective Signup and view all the answers

What does the text suggest about configuring Fallback for each segment?

Fallback settings apply globally to the device Signup and view all the answers

For what purpose is L2FB not useful according to the text?

Identifying fault in physical connectivity Signup and view all the answers

What consideration is important concerning the placement of the device?

Avoiding physical detection by attackers Signup and view all the answers