Network Configuration and Installation Guide Quiz
10 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the first step to connect the monitor to the QNAP appliance?

  • Verify active cameras
  • Power on the monitor
  • Use an HDMI cable (correct)
  • Patch the Homerun CAT6 cable

    • How are the cameras labeled for installation on Drop Tile or Hard Lid ceilings?

  • Marked with colors
  • Numbered 1 - 10
  • Labeled A - H
  • Labeled 1 - 8 (correct)

    • What is the function of the 'flag' coming off the Cameras on the LV Diagram?

  • Indicate camera battery level
  • Signal low network connectivity
  • Highlight malfunctioning cameras
  • Show the direction the camera is looking at (correct)

    • Where should you patch the Homerun CAT6 cable for camera setup?

    <p>To the Mod Plug connected to the camera</p> Signup and view all the answers

    How can you adjust the camera view to a desired target?

    <p>Utilize the Solink App on your phone</p> Signup and view all the answers

    What should you do after mounting a camera on Drop Tile or Hard Lid ceilings?

    <p>Verify active cameras on the monitor</p> Signup and view all the answers

    Which app should be used to correctly point the camera view?

    <p>Solink App</p> Signup and view all the answers

    How can you determine if a camera is looking straight down based on the LV Drawing?

    <p>'Flag' not present</p> Signup and view all the answers

    What should be done to ensure all cameras are online and functioning?

    <p>Call Solink Support.</p> Signup and view all the answers

    What should you use to secure a camera to Drop Tile or Hard Lid ceilings?

    <p>Appropriate size screws</p> Signup and view all the answers

    More Like This

    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser