NetVisor OS Software Activation Guide

Play an AI-generated podcast conversation about this lesson

What credentials should be used to log into the serial console after installing NetVisor OS?

Username: root, Password: password

Username: management, Password: switch

Username: admin, Password: network-admin

Username: network-admin, Password: admin (correct)

What actions should be taken after logging into the serial console following NetVisor OS installation?

Reboot the switch immediately

Accept the EULA agreement and configure switch parameters (correct)

Ignore any prompts and disconnect the switch

Install additional software

Where can the latest NetVisor OS software release be obtained from?

Pluribus Networks Cloud (PNC) (correct)

Internet Explorer website

Google Drive

Apple Store

Which version of NetVisor OS must you upgrade to first if transitioning from version 3.0.4 to versions 5.x.x or higher?

Version 3.1.1 Signup and view all the answers

What should be connected to the management network after configuring switch parameters?

Management port Signup and view all the answers

If you have disconnected the mgmt port previously, what action should you take after setup?

Reconnect mgmt port to the management network Signup and view all the answers

What should you do after upgrading NetVisor OS software on a Freedom series switch?

Upgrade to the latest release Signup and view all the answers

What is a recommended source for information on services offered by Pluribus Networks Cloud (PNC)?

<a href="https://www.pluribusnetworks.com/get-started/"><a href="https://www.pluribusnetworks.com/get-started/%5D(https://www.pluribusnetworks.com/get-started/)">https://www.pluribusnetworks.com/get-started/</a></a> Signup and view all the answers

NetVisor OS Software Activation Guide

Podcast Beta

Questions and Answers