Questions and Answers
What does FINE-C refer to?
an engine pre-start routine
What does FINE-C stand for?
Fuel, Ignition, Neutral, Engine cut-off switch, Choke and Clutch
What does the F in FINE-C mean?
Fuel
What does the I in FINE-C stand for?
Signup and view all the answers
What does the N in FINE-C represent?
Signup and view all the answers
What does the E in FINE-C stand for?
Signup and view all the answers
What does the C in FINE-C refer to?
Signup and view all the answers
Always apply at least one _________ when starting the engine.
Signup and view all the answers
Do not use the ________ if the _________ is On as this could provide too much fuel to the engine.
Signup and view all the answers
Once the engine is started, you can release the _________ lever, but do so slowly in case the motorcycle is not in _________.
Signup and view all the answers
Do not take your hand off the ________ when starting the engine of a motorcycle because the motorcycle may be in gear.
Signup and view all the answers
Where is the throttle located?
Signup and view all the answers
To roll on the throttle means to?
Signup and view all the answers
Where is the clutch lever located?
Signup and view all the answers
What happens when you squeeze in the clutch?
Signup and view all the answers
Where is the gearshift located?
Signup and view all the answers
To use the gearshift, lift your foot up for a higher gear, and press down for a ________ gear.
Signup and view all the answers
When shifting gears, your foot only needs to move up or down _________.
Signup and view all the answers
Most motorcycles have how many gears?
Signup and view all the answers
Neutral gear is located in between which gears?
Signup and view all the answers
Where is the fuel supply valve located?
Signup and view all the answers
What does the fuel supply valve do?
Signup and view all the answers
Where is the ignition switch usually located?
Signup and view all the answers
What are the positions on the ignition switch?
Signup and view all the answers
What do the Lock and Park positions on an ignition switch do?
Signup and view all the answers
What does the Park position on the ignition switch do?
Signup and view all the answers
Where is the choke control located?
Signup and view all the answers
What does the choke control do?
Signup and view all the answers
Fuel injected motorcycles have a choke control.
Signup and view all the answers
Where is the engine cut-off switch located?
Signup and view all the answers
What does the engine cut-off switch do?
Signup and view all the answers
Where is the turn signal switch usually located?
Signup and view all the answers
Where is the high-low beam switch located?
Signup and view all the answers
Where is the horn button located?
Signup and view all the answers
Where is the engine start button usually located?
Signup and view all the answers
Study Notes
FINE-C Overview
- FINE-C is an engine pre-start routine designed to ensure motorcycle readiness.
- FINE-C stands for Fuel, Ignition, Neutral, Engine cut-off switch, Choke, and Clutch.
FINE-C Components
- Fuel: Turn the fuel supply valve on, if equipped.
- Ignition: Turn the ignition switch to the On position; indicator lights should illuminate.
- Neutral: Ensure the transmission is in Neutral, indicated by a green light; the motorcycle should roll when the clutch and front brake are released.
- Engine Cut-Off Switch: Set the switch to the Run/On position.
- Choke and Clutch: Set the choke for cold starts and squeeze the clutch lever, which must be in to start the engine.
Safety Procedures
- Always apply at least one brake when starting the engine.
- Avoid using the throttle when the choke is on to prevent excessive fuel delivery.
- Release the clutch lever slowly to confirm the motorcycle is in Neutral after starting.
- Never remove your hand from the clutch while starting, as the motorcycle may be in gear.
Control Locations
- The throttle is on the right hand grip; rolling on the throttle means twisting it towards you.
- The clutch lever is located at the left hand grip.
- The gearshift is positioned on the left footrest, shifting up for a higher gear and down for a lower gear.
- Most motorcycles typically have 5 or 6 gears, with Neutral located between first and second gear.
Fuel Systems and Controls
- The fuel supply valve is situated under the engine, controlling the amount of fuel to the tank.
- The ignition switch, found near the instrument cluster, typically includes On, Off, Lock, and sometimes Park positions.
- The Park position activates the taillight for visibility when stationary.
- The choke control is located on the handlebars or near the engine, providing an enriched fuel mixture for cold starts.
Engine Cut-Off and Other Controls
- The engine cut-off switch is found near the right hand grip and allows for engine shutdown without removing hands from the handlebar.
- Various buttons, including the Turn Signal, High-Low Beam, Horn, and Engine Start, are typically located near the left or right handgrip for easy thumb operation.
Additional Notes
- Fuel-injected motorcycles do not feature a choke control, as they automatically adjust fuel delivery.
- The choke should be turned off once the engine idles smoothly without assistance.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
Test your knowledge on the FINE-C engine pre-start routine essential for motorcycle safety. This quiz covers the components of FINE-C, including Fuel, Ignition, Neutral, Engine cut-off switch, Choke, and Clutch. Perfect for students of motorcycle safety courses.
