Mechanical Engineering Quiz: Forces and Gears
30 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What type of forces have the same line of action?

  • Co-axial forces
  • Colinear forces (correct)
  • Concurrent forces
  • Coplanar forces

What is the term for the plane perpendicular to the gear axis?

  • Axial plane (correct)
  • Pitch plane
  • Transverse plane
  • Plane of rotation

What is another name for an eccentrically loaded bearing?

  • Radial bearing
  • Offset bearing (correct)
  • Thrust bearing
  • Clearance bearing

What type of gear is also known as a herringbone gear?

<p>Double helical gear (D)</p> Signup and view all the answers

What is the term for the stationary member that carries pulleys, wheels, etc. that transmit power?

<p>Axle (C)</p> Signup and view all the answers

What is the ratio of the applied load to the corresponding smallest value of cross-sectional area of the specimen?

<p>True stress (A)</p> Signup and view all the answers

What type of gear is used to transmit power at an angle but not usually at right angle?

<p>Bevel gear (D)</p> Signup and view all the answers

What is the modulus of elasticity in shear also known as?

<p>Modulus of rigidity (C)</p> Signup and view all the answers

What is the force that can be defined as simply push or pull?

<p>Force (B)</p> Signup and view all the answers

What is the width of tooth exceeding the thickness of each of the engaging tooth on the pitch circle referred to as?

<p>Backlash (C)</p> Signup and view all the answers

What is the smaller of two meshed gears referred to as?

<p>Pinion (D)</p> Signup and view all the answers

What is the bearing applied to a shaft to prevent endwise movement referred to as?

<p>Thrust bearing (C)</p> Signup and view all the answers

What is the term used to describe the pressure angle in involute teeth?

<p>angle of obliquity (C)</p> Signup and view all the answers

What type of coupling is used to connect shafts that are out of alignment laterally or angularly?

<p>flexible coupling (B)</p> Signup and view all the answers

What is the name of the curved formed by the path of a point on a circle as it rolls along a straight line?

<p>cycloid (D)</p> Signup and view all the answers

What type of key fits into a semi-cylindrical seat in the shaft?

<p>Woodruft key (B)</p> Signup and view all the answers

What is the term used to describe the ratio of tight side tension to slack side tension in belt design?

<p>tension ratio (A)</p> Signup and view all the answers

What is the plane that contains the two axes in a pair of gears?

<p>axial plane (D)</p> Signup and view all the answers

What is the opposite of clearance for the mating of cylindrical parts?

<p>Interference (D)</p> Signup and view all the answers

What type of brake is an eddy-current brake an example of?

<p>Electrical brake (C)</p> Signup and view all the answers

What type of gear is equivalent to two helical gears, one having a right-hand helix and the other a left-hand helix?

<p>Herringbone gear (C)</p> Signup and view all the answers

What type of lubrication represents manual or drip lubrication?

<p>Type B (D)</p> Signup and view all the answers

What is the nominal diameter of bolts?

<p>Pitch diameter (A)</p> Signup and view all the answers

What type of seal is an airtight seal?

<p>Hermetic seal (A)</p> Signup and view all the answers

What is the direction of the follower movement in a cylindrical cam?

<p>Parallel to the axis of rotation (A)</p> Signup and view all the answers

What is the velocity of an object thrown upward when it returns to earth?

<p>Equal to the initial velocity (A)</p> Signup and view all the answers

What is the product of the resultant of all forces acting on a body and the time the resultant acts?

<p>Linear impulse (B)</p> Signup and view all the answers

What is the total resistance that a material offers to an applied load?

<p>Stress (A)</p> Signup and view all the answers

What is the purpose of backlash in gears?

<p>To prevent gears from jamming (B)</p> Signup and view all the answers

What is another name for a belt that has teeth on the inside?

<p>Timing belt (B)</p> Signup and view all the answers

More Like This

Mechanical Engineering Gear Network Quiz
6 questions
Mechanical Engineering Flashcards
39 questions
Use Quizgecko on...
Browser
Browser