Measuring Tools and Their Uses

Unplug the saw or remove the batteries and keep ventilation slots clean.

A screwdriver is used to turn screws.

A clean handle helps maintain a solid grip and prevents slips.

<p>Never turn on the jigsaw when the blade is against the material, and never force the saw.</p> Signup and view all the answers

<p>A drill is used to create holes or drive fasteners, such as screws, into materials.</p> Signup and view all the answers

<p>Soak the screwdriver in cleaner for 30 seconds to a minute.</p> Signup and view all the answers

<p>A socket wrench should be cleaned and completely dried before storage to prevent rust.</p> Signup and view all the answers

<p>Only use pliers for their intended purpose and store them in a dry place.</p> Signup and view all the answers

<p>Wearing safety glasses protects the eyes from flying debris and potential accidents.</p> Signup and view all the answers

<p>Clean screws with a wire brush.</p> Signup and view all the answers

<p>You should never try to cut a hot wire or rock the pliers side to side when cutting.</p> Signup and view all the answers

<p>The tip of a flathead screwdriver is shaped like a straight line.</p> Signup and view all the answers

<p>Drills should be kept clean and their ventilation slots should be maintained to avoid overheating.</p> Signup and view all the answers

<p>Loose clothing and hair should be secured to prevent entanglement in the drill.</p> Signup and view all the answers

<p>A socket wrench is designed to turn a nut or bolt without needing to readjust it.</p> Signup and view all the answers

<p>Always ensure the wrench is the correct size for the nut or bolt being used.</p> Signup and view all the answers

<p>A tape measure is primarily used to measure the length of various materials for building.</p> Signup and view all the answers

<p>You should avoid direct sunlight and extreme heat.</p> Signup and view all the answers

<p>A tri square is used to measure 90-degree and 45-degree angles, along with simple distance measurements.</p> Signup and view all the answers

<p>You should clean it with a nonabrasive scouring pad and a lubricant.</p> Signup and view all the answers

<p>A claw hammer is used to push nails into surfaces.</p> Signup and view all the answers

<p>Ensure that the handle is firmly attached to the head of the hammer.</p> Signup and view all the answers

<p>After measuring, you should unlock and bring in the blade slowly to avoid injury.</p> Signup and view all the answers

<p>It helps ensure that cuts and joints are at the correct angles.</p> Signup and view all the answers

<p>A claw hammer is used to drive nails into wood and remove them. It should be used by striking the hammer directly and parallel with the object being struck.</p> Signup and view all the answers

<p>A handsaw should be lubricated with gun oil, paste wax, or WD-40 after use and before storage.</p> Signup and view all the answers

<p>Always maintain a balanced body position and avoid drawing the knife toward yourself while cutting.</p> Signup and view all the answers

<p>A circular saw is a power saw with a toothed disc used to cut materials in a circular motion.</p> Signup and view all the answers

<p>Always avoid humid places, keep blades clean, and do not rest blades on cement or steel surfaces.</p> Signup and view all the answers

<p>A jigsaw is used to cut curves and shapes in wood and other materials. Its maintenance includes keeping the blades clean and replacing them often to prevent rust.</p> Signup and view all the answers

<p>Wearing eye/face protection and gloves is crucial for preventing injuries from flying debris and sharp edges.</p> Signup and view all the answers

<p>The blade of a utility knife should be replaced often to ensure effective cutting performance.</p> Signup and view all the answers