4AE3 U4 C1 Obj 5

Study Flashcards Play Quiz

Questions and Answers

Which statement describes the purpose of hazard identification and assessment?

To create an effective Health and Safety Management System

What are the two categories of hazards at a worksite?

Safety hazards and health hazards

What is the purpose of hazard assessment?

To identify workplace hazards

Which of the following is true about hazard re-assessment?

It is performed to assess the safety of controls after they are fully implemented Signup and view all the answers

Who typically drives the implementation of change by submitting a request for engineering controls through design and modification?

Workers with knowledge and understanding Signup and view all the answers

What is the purpose of inspections and preventive maintenance scheduling?

To ensure established controls are sound and adequate Signup and view all the answers

Which of the following is NOT a method used to control potential work-related hazards?

Revise the work procedures Signup and view all the answers

According to the text, what is the last line of defense for safety in a workplace?

Using personal protective equipment (PPE) Signup and view all the answers

What are some examples of preventative measures mentioned in the text?

Locking out and de-energizing equipment Signup and view all the answers

What are the three ways to eliminate or control identified hazards in the workplace?

Designing new equipment, modifying equipment designs, using PPE Signup and view all the answers

Which category of hazard assessment is conducted just before work begins?

Field Level Hazard Assessment Signup and view all the answers

What are the general steps for conducting a formal hazard assessment?

Establish an inventory of job tasks, identify hazards, determine control methods, update SOPs Signup and view all the answers

What is another name for Job Safety Analysis?

Job Hazard Analysis Signup and view all the answers

What is the purpose of performing a Job Safety Analysis?

To discuss and observe the actual job Signup and view all the answers

Which of the following is NOT a purpose of hazard re-assessment?

To assess the effectiveness of implemented controls Signup and view all the answers

What is the purpose of control measures in the workplace?

To ensure the safety of workers Signup and view all the answers

What is the purpose of inspections and preventive maintenance scheduling in relation to established controls?

To ensure the controls are sound and adequate Signup and view all the answers

Which of the following is true about hazard identification and assessment?

It forms the basis of a Worksite Inspection checklist. Signup and view all the answers

What are the two categories of hazards at a worksite?

Safety hazards and health hazards Signup and view all the answers

What is the purpose of hazard assessment?

To identify and assess potential hazards in a worksite Signup and view all the answers

Which of the following is NOT a method used to control potential work-related hazards?

Eliminate the hazard Signup and view all the answers

What is the purpose of inspections and preventive maintenance scheduling?

To ensure equipment is in safe condition Signup and view all the answers

What are the three ways to eliminate or control identified hazards in the workplace?

Design new equipment, train and certify employees, use personal protective equipment (PPE) Signup and view all the answers

What are some examples of preventative measures mentioned in the text?

All of the above Signup and view all the answers

Which category of hazard assessment is conducted just before work begins?

Field Level Hazard Assessment Signup and view all the answers

What is the purpose of inspections and preventive maintenance scheduling?

To ensure equipment and systems are in good working condition and to prevent accidents Signup and view all the answers

What are some examples of preventative measures mentioned in the text?

Implementing controls to eliminate, remove, and reduce hazards and risks Signup and view all the answers

What are the general steps for conducting a formal hazard assessment?

Establish an inventory of all job tasks, identify potential hazards and risks, determine control methods, update and review Signup and view all the answers

Which of the following is true about the hazard identification and assessment process?

It helps in the development of a Worksite Inspection checklist. Signup and view all the answers

What are the two categories of hazards at a worksite?

Safety and health hazards Signup and view all the answers

What is the purpose of performing a Job Safety Analysis?

To identify and assess hazards in the workplace Signup and view all the answers

Which of the following is NOT a purpose of inspections and preventive maintenance scheduling in relation to established controls?

To identify potential work-related hazards Signup and view all the answers

What is the purpose of hazard re-assessment?

To assess the safety of the controls Signup and view all the answers

Who typically drives the implementation of change by submitting a request for engineering controls through design and modification?

Workers with extensive knowledge and understanding Signup and view all the answers

Which of the following is NOT a method used to control potential work-related hazards?

Eliminate the hazard Signup and view all the answers

What is the purpose of inspections and preventive maintenance scheduling in relation to established controls?

To evaluate the effectiveness of controls Signup and view all the answers

What are the three ways to eliminate or control identified hazards in the workplace?

Modify equipment designs, revise work procedures, and use PPE Signup and view all the answers

What is the purpose of performing a Job Safety Analysis?

To identify hazards and develop hazard controls Signup and view all the answers

Which of the following is NOT a step in conducting a formal hazard assessment?

Update, review, and re-assess whenever there is a change or a scheduled review of the SOP associated with the specific job task Signup and view all the answers

Which of the following is NOT a step in conducting a field level hazard assessment?

Create Hazard Identification Cards to support the hazard assessment process Signup and view all the answers

Which of the following is NOT a benefit of performing a Job Safety Analysis (JSA)?

Ranking jobs according to their hazards Signup and view all the answers

Which of the following is NOT a step in conducting a Job Safety Analysis (JSA)?

Rank jobs according to their hazards Signup and view all the answers

Study Notes

Hazard Identification and Assessment

The purpose of hazard identification and assessment is to identify, evaluate, and prioritize hazards to determine the likelihood and potential impact of an incident or injury.

Categories of Hazards

The two categories of hazards at a worksite are:
- Inherent hazards (exist naturally in the workplace)
- Acquired hazards (result from the work process or activities)

Purpose of Hazard Assessment

The purpose of hazard assessment is to identify and evaluate the level of risk associated with a hazard.

Hazard Re-Assessment

Hazard re-assessment is necessary when changes occur in the workplace, such as new equipment, processes, or procedures.
The purpose of hazard re-assessment is to re-evaluate the level of risk associated with a hazard and implement new controls or modify existing ones.

Implementation of Change

Employees typically drive the implementation of change by submitting a request for engineering controls through design and modification.

Inspections and Preventive Maintenance

The purpose of inspections and preventive maintenance scheduling is to ensure that controls are functioning as intended and to identify potential hazards before they cause an incident.
Inspections and preventive maintenance scheduling are also used to verify the effectiveness of established controls.

Control Measures

The purpose of control measures is to eliminate or reduce the risk of injury or illness from identified hazards.
The three ways to eliminate or control identified hazards in the workplace are:
- Engineering controls (designing out the hazard)
- Administrative controls (changing work procedures or practices)
- Personal protective equipment (PPE)

Preventative Measures

Examples of preventative measures mentioned in the text include:
- Job Safety Analysis (JSA)
- Inspections and preventive maintenance scheduling
- Hazard identification and assessment

Job Safety Analysis (JSA)

Job Safety Analysis (JSA) is also known as Job Hazard Analysis (JHA).
The purpose of performing a JSA is to identify and assess hazards associated with a specific job or task.
The purpose of a JSA is to identify hazards and implement controls to prevent injuries or illnesses.

Hazard Identification and Assessment Process

The hazard identification and assessment process is an ongoing process that involves continuous monitoring and evaluation of hazards in the workplace.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

4AE3 U4 C1 Obj 5

Questions and Answers

Which statement describes the purpose of hazard identification and assessment?

What are the two categories of hazards at a worksite?

What is the purpose of hazard assessment?

Which of the following is true about hazard re-assessment?

Who typically drives the implementation of change by submitting a request for engineering controls through design and modification?

What is the purpose of inspections and preventive maintenance scheduling?

Which of the following is NOT a method used to control potential work-related hazards?

According to the text, what is the last line of defense for safety in a workplace?

What are some examples of preventative measures mentioned in the text?

What are the three ways to eliminate or control identified hazards in the workplace?

Which category of hazard assessment is conducted just before work begins?

What are the general steps for conducting a formal hazard assessment?

What is another name for Job Safety Analysis?

What is the purpose of performing a Job Safety Analysis?

Which of the following is NOT a purpose of hazard re-assessment?

What is the purpose of control measures in the workplace?

What is the purpose of inspections and preventive maintenance scheduling in relation to established controls?

Which of the following is true about hazard identification and assessment?

What are the two categories of hazards at a worksite?

What is the purpose of hazard assessment?

Which of the following is NOT a method used to control potential work-related hazards?

What is the purpose of inspections and preventive maintenance scheduling?

What are the three ways to eliminate or control identified hazards in the workplace?

What are some examples of preventative measures mentioned in the text?

Which category of hazard assessment is conducted just before work begins?

What is the purpose of inspections and preventive maintenance scheduling?

What are some examples of preventative measures mentioned in the text?

What are the general steps for conducting a formal hazard assessment?

Which of the following is true about the hazard identification and assessment process?

What are the two categories of hazards at a worksite?

What is the purpose of performing a Job Safety Analysis?

Which of the following is NOT a purpose of inspections and preventive maintenance scheduling in relation to established controls?

What is the purpose of hazard re-assessment?

Who typically drives the implementation of change by submitting a request for engineering controls through design and modification?

Which of the following is NOT a method used to control potential work-related hazards?

What is the purpose of inspections and preventive maintenance scheduling in relation to established controls?

What are the three ways to eliminate or control identified hazards in the workplace?

What is the purpose of performing a Job Safety Analysis?

Which of the following is NOT a step in conducting a formal hazard assessment?

Which of the following is NOT a step in conducting a field level hazard assessment?

Which of the following is NOT a benefit of performing a Job Safety Analysis (JSA)?

Which of the following is NOT a step in conducting a Job Safety Analysis (JSA)?

Study Notes

Hazard Identification and Assessment

Categories of Hazards

Purpose of Hazard Assessment

Hazard Re-Assessment

Implementation of Change

Inspections and Preventive Maintenance

Control Measures

Preventative Measures

Job Safety Analysis (JSA)

Hazard Identification and Assessment Process

Studying That Suits You

More Quizzes Like This

Health and Safety End of Term Quiz

Health and Safety End of Term Quiz

Hazard Control Measures Quiz

Workplace Hazards and Control Measures